E L E CTRI CA L LON G B OA R D USE R G U ID E
INDEX 01 02 03 08 09 10 11 12 16 19 20 22 24 .................................. .................................. .................................. .................................. .................................. .................................. .................................. .................................. .................................. .................................. .................................. .................................. ..................................
I N T ROD UC T I ON Congratulations, you have purchased an E-GO 2 . You are now the owner of a portable, eco-friendly mode of transport that is incredibly fun to use. Integrating state of the art motor technology developed by YUNEEC for use in the aviation industry, E-GO 2 brings to the streets an experience and convenience that was never available in the past.
overview 1 3 6 5 2 4 THE DEC K TH E BATTERY 1 . charge port The E-GO 2 features a 12 mm, eight layered composite wood deck, making it flexible, durable and strong: all the qualities a rider looks for in a board. The deck surface is finished with griptape to avoid slipping. E-GO 2 ’s sleek, low profile multi-cell battery pack is located under the deck, and utilises Yuneec’s latest, patented battery technology. Its’ flexible battery casing allows the deck to bend while riding. 3 . power status 2 .
bearing THE WHEELS The E-GO 2 `s 90mm wheels provide traction and stability on an array of surfaces, turning the E-GO 2 into a reliable urban transport system. T HE MOTO R k in g p in n u t By integrating technology developed by Yuneec for use in the aviation industry, the brushless 400 watt motor provides reliable and efficient power for your E-GO 2 . T H E T RUCKS Connecting the wheels to the deck are two alloy trucks made of the highest grade materials available.
THE CONT R O LLER 7 The EB24C is the smart controller of E-GO2, a key feature of the E-GO 2 is without doubt its sleek, pocket-sized, wireless controller which allows you to intuitively control its movements by simply sliding the throttle / brake (7) up and down. 8 START 9* 6 The battery status indicator's light (9) indicates the wireless controller's and board’s battery status: Green light indicates the board’s battery status. Blue light indicates the controller’s battery status.
T HE TRUCK TO O L To keep your E-GO 2 's performance up to maximum you will need to do regular maintenance checks (for more info on maintenance please check page 17), making sure the board is not obstructed by dirt and all nuts and bolts are properly tightened. To tighten and loosen these nuts and bolts, your E-GO 2 comes with a specific tool - the truck tool - that allows you to do that.
T H E USB Use the USB to connect the wireless controller to the board's USB port, to any computer or any other USB port for recharging purposes. T H E C H ARG ER The E-GO 2 charger allows you to fully recharge the E-GO 2 and the controller's battery in 3 to 5 hours (depending on charge left and ambient temprature) giving you a maximum riding range of 30 km / 18 miles (depending on weight, road conditions, riding style, etc...).
C HARGE SE TUP The board needs to be power-ed on in order to charge the wireless controller through the usb port. C h arg e l ead depending o n s al e s area To ensure a healthy battery life, recharge the battery for 6 hours straight before first use. This will condition the battery and give better long term performance.
S Y N CI NG C O N T ROL L E R AN D B OARD 1 Use the pin tool (page 8) to slide the speed switch (positioned on the left side of the controller) fully down. 4 Begin with the 'BLUETOOTH' switch flipped toward the right (closest to the motor). Immediately after powering the board ON, move the ‘BLUETOOTH’ switch to the left (furthest away from the motor) and back to the right (closest to the motor). Then the battery status indicator should go from flashing fast to flashing more slowly.
FE AT URE S THE E-GO 2 FEATURES 2 SPEED MODES: A SLOW MODE OR BEGINNER MODE - WITH A LIMITED SPEED OF 13 KM/H OR 8 MPH), AND A FAST MODE - WITH A MAXIMUM SPEED OF 20 KM/H OR 12.5 MPH. THE E-GO 2 ALSO FEATURES 2 RIDING MODES: THE ECO MODE - WITH A LOWER ACCELERATION CURVE - AND THE SPORT MODE - WITH A HIGHER ACCELERATION CURVE. RIDING IN ECO MODE WILL DEMAND LESS POWER FROM THE BATTERY THUS MAXIMIZING THE EGO'S RANGE. THE E-GO 2 WILL TAKE YOU UP INCLINES OF UP TO 10% FOR A LIMITED DISTANCE.
PE R FO R M A N CE B OARD Max. User Weight: 100kg / 220bs Max. Range: 18mi / 30km High Speed Mode Max.: 12.5mph / 20km/h Low Speed Mode Max.: 8mph / 13km/h Deck Material: Canadian Maple Wood Deck Dimensions: 910*240mm Wheel Material: Polyurethane Wheel Size: 90mm diameter / 52mm width Battery Type: Li-ion Battery Capacity: 7.8 AH Battery Cell Quantity: 21 pcs Battery Charging Time: 3-5 hours (depending on ambient temperature) Motor Type: Brushless Direct Current Motor Power: Max.
S A F ETY W ARN I N G S AN D T I P S A B O U T T H E S AFETY G U ID ELINES BEFORE RIDING THE E-GO 2 , IT IS STRONGLY ADVISED TO READ THROUGH AND FOLLOW ALL TIPS, INSTRUCTIONS AND WARNINGS LISTED UNDERNEATH.
RID ER TIPS WHILE RIDING KEEP YOUR BACK STRAIGHT AND USE YOUR ARMS TO MAINTAIN BALANCE // BENDING YOUR KNEES LOWERS YOUR BODY'S CENTER OF GRAVITY WHICH INCREASES STABILITY // SHIFT YOUR BODY WEIGHT TO THE FRONT WHEN ACCELERATING // SHIFT YOUR BODY WEIGHT TO THE BACK WHEN BRAKING // TO TURN / CARVE, DISPLACE YOUR BODY WEIGHT AND EXERT PRESSURE ON THE HEEL AND TOE SIDES OF THE BOARD // YOUR TURNING RADIUS DEPENDS ON THE AMOUNT OF PRESSURE YOU EXERT ON THE SIDE OF THE BOARD: MORE PRESSURE MEANS SHARPER TURNING
RIDING OUTSIDE OF YOUR PRIVATE PROPERTY ABIDE BY THE LAWS AND REGULATIONS IN YOUR STATE OR COUNTRY // RESPECT OTHER DRIVERS AND PEDESTRIANS ON THE ROAD // AVOID RIDING ON BUSY ROADS AND CROWDED AREAS // ADJUST YOUR SPEED WHEN RIDING ON THE SIDEWALK // DO NOT PARK YOUR E-GO 2 IN A WAY THAT BLOCKS PEOPLE OR TRAFFIC AS IT CREATES A SAFETY HAZARD // CROSS ROADS AT DESIGNATED CROSSWALKS OR SIGNALED INTERSECTIONS // DO NOT JAYWALK / RIDE // WHEN RIDING WITH OTHER E-GO 2 RIDERS YOU SHOULD KEEP A SAFE DISTANCE FROM
BAT T E R Y S AFE T Y LITHIUM-ION BATTERIES CAN EXPLODE OR CAUSE A FIRE IF THEY ARE USED INCORRECTLY OR IF THEY ARE DEFECTIVE. THEREFORE, YOU ARE RECOMMENDED TO READ THE FOLLOWING INSTRUCTIONS VERY CAREFULLY: - EACH TIME BEFORE USING THE BATTERY, CAREFULLY CHECK THE BATTERY PACK AND IN PARTICULAR THE PROTECTIVE SEAL/ CASING TO MAKE SURE THAT IT IS UNDAMAGED AND INTACT. IF IN DOUBT, TAKE THE BATTERY TO A CHEMICAL WASTE DISPOSAL FACILITY AND/OR CONTACT YUNEEC CUSTOMER SUPPORT IMMEDIATELY.
TR O UB LESH OOTING MY BOARD D OE SN`T STA RT MY BOARD IS MOV I NG AT LOW SPE E D... 1.1 Check if the board is activated on. When turning on the board you should hear two beeps and its status indicator light should come on. 1.2 C h e c k i f t h e c o n t ro l l e r i s p o w e re d O N . W h e n t u r n i n g O N t h e c o n t ro l l e r, i t s blue light should start flashing. 1.
MYY BOARD M B O A RSTOP D S TSO P S AU A UTOMATICAL T O M A T I CLY A L LY 3.1 1 3.2 3.2 3.3 3.3 3.4 3.4 3.5 3 ..
3.7 If during your ride you hear a beep, the board stops and only the controller's b l u e l i g h t i s f l a s h i n g , i t m e a n s t h e c o n t r o l s i g n a l i s l o s t . Tu r n t h e c o n t r o l l e r off and then on again to reconnect. 3.8 Control signal loss will occur when the distance between your board and c o n t r o l l e r b e c o m e s t o o g r e a t . To r e c o n n e c t c l o s e t h e d i s t a n c e b e t w e e n the two. M Y BOARD D OESN' T 4.
S P AR E P AR T S EGOCR001AU .............. EGOCR001EU .............. EGOCR001UK .............. EGOCR001US .............. EGOCR002 .................. EGOCR003 .................. EGOCR004 .................. EGOCR005 .................. EGOCR006 .................. EGOCR007 .................. EGOCR008 .................. EGOCR009 .................. EGOCR010AU .............. EGOCR010EU .............. EGOCR010UK .............. EGOCR010US .............. EGOCR011 .................. EGOCR012 ..................
4 D E CK S C REW S G AR AG E 3 2 MAKE SURE THE E-GO 2 IS POWERED OFF WHEN DOING MAINTENANCE OR REPLACING COMPONENTS. 1 1. front truck screws 3. ECU screws 2. 4. battery pack screws rear truck screws 8 D R I VE W H E EL AND BE L T 10 5. motor cover 7. drive belt cover screw 6. 8. 9. 9 10 drive belt cover drive belt drive wheel 5 1 0 . washer 1 1 . drive wheel nut 11 20 7 6 DEFORMING THE DRIVE B E LT M I G H T D A M A G E I T.
13 14 12 T R UCKS AND BUS H IN G S 12. king pin nut 18. king pin 14. top bushing 20. baseplate 13. top cup washer 19. baseplate nut 15. truck 21. baseplate rubber 16. bottom bushing 15 18 17. bottom cup washer 16 17 19 22. truck screw 20 21 22 28 26 TO R E P L A C E T H E G R I P TA P E I T I S A D V I C E D T O C O N S U LT Y O U R L O C A L S K A T E S H O P. 24 23 25 24 27 25 2 3 . wheel nut 2 4 . washer 2 5 . bearing 2 6 . spacer 2 7 .
BATTE R Y P ACK AND E CU 28 29 31 28. ECU (Electronic 32 Control Unit) 29. battery pack 30. battery pack rubber 29 30 28 31. JST RCY connector 32. EC3 connector INSTA L L AT I O N G UI D E FRONT TRUCK SET REAR TRUCK SET WITH ELECTRONIC CONTROL EGOCR011 1 Unscrew the front wheel bolts. 2 Dismount the front wheels from the truck's axle. 3 Unscrew the top screws connecting the front baseplate to the deck. 4 Replace the complete assembly with the replacement part and reinstall.
IN STAL L AT I O N G UI D E MOTOR COVER EGOCR003 1 Unscrew the five screws securing t h e m o t o r c o v e r. 2 R e m o v e t h e m o t o r cover and replace it with the replacement part. 3 Screw on the motor cover screws and tighten. DRIVE BELT EGOCR004 1 Unscrew the drive wheel bolt. 2 Dismount the rear wheels from the trucks axle. 3 Unscrew the drive belt cover screws. 4 Replace the belt with the replacement part. 5 Screw on and tighten the drive belt cover screws.
C ERTIFICATI ON I N FOR M ATI ON F C C S TAT E M E N T: T h i s e q u i p m e n t h a s b e e n t e s t e d a n d f o u n d t o c o m p l y w i t h t h e l i m i t s f o r Pa r t 1 5 o f t h e F C C r u l e s . T h e s e l i m i t s a r e d e s i g n e d t o provide reasonable protection against harmful interference in a residential installation.
