TABLE OF CONTENTS 1 . . . . . . . . . . . . . . . . . . . . . . . . System Requirementments (Windows) 1 . . . . . . . . . . . . . . . . . . . . . . . . System Requirementments (Mac) 2 . . . . . . . . . . . . . . . . . . . . . . . . Technical Specifications 2 . . . . . . . . . . . . . . . . . . . . . . . . Introduction 3 . . . . . . . . . . . . . . . . . . . . . . . . Overview 5 . . . . . . . . . . . . . . . . . . . . . . . . What is included in the CGO2-GB 6 . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS Dimensions LxWxH: Weight: Working Voltage: Wireless Frequency Range: Lens Sensor: Field of view: Pitch Axis Control: Effective Pixels: White Balance: Focusing System: Storage Temperature: Working Temperature: 74x100x128mm (with lens) 167g (without transfer board) 12V 5745MHz---5825MHZ 16M 155° 0~80° 16 million pixels Automatic white balance Fixed Focus -20°C- 60°C 0°C-50°C INTRODUCTION CGO2-GB is a high-resolution gimbal camera specifically developed by Yuneec for small UAVs.
OVERVIEW Illustration A: LED indicator: -Red LED solid: Power On -Green LED solid: Get Ready -Green and Blue LEDs flash alternatively: Video/Photo taking -Yellow LED flashes: T card error -Red LED flashes: Wifi error Camera 5.
Illustration C: NOTE:T Card Storage should be more than 4GB or CGO2GB will failed in recording.
Illustration E: gyro cable slot SR12S cable slot CGO2-GB power cable slot (2 pin cable from QX1 ) potentiometer cable slot Yaw motor control cable slot Roll motor control cable slot Pitch motor control cable slot 5
What is included in the CGO2-GB Illustration F:The entire CGO2-GB includes a camera, a gimbal and internal 5.8Ghz wifi antenna. Gimbal Camera Internal 5.8Ghz Wifi Antenna Mounting on QX1 Mounting CGO2-GB to QX1 Step.1 Mounting CGO2-GB transfer board to the QX1 with 3 socket head cap screws (ST2.5*10).
Illustration H:Transfer board mounted to QX1 Step.2 Slide the CGO2-GB onto the transfer board as shown until it locks.
Powering the CGO2-GB After mounting CGO2-GB, plug in the “CGO2-GB power cable” to the CGO2-GB power cable slot (Illustration E) and the “CGO2-GB control cable” to the CGO2-GB control cable slot (Illustration D) . Note: The CGO2-GB does not contain any battery pack. It is directly powered from the QX1.
Turn on the power button to “ON” To Power ON: Turn on the power button on QX1 to “ON”, Red LED indicates CGO2GB has been successfully powed on, 30-40s later, when the Red LED turns into Green LED, it indicates that wifi for CGO2GB is ready. To Power OFF: Turn off the power button on QX1 to “OFF”. Access to WiFi: When the Green LED is on, customers can use 5.8G device to search for CGO2GB’s SSID. The initial password is: 1234567890.
CGO2-GB APP Interfaces Interface A: SETTINGS RESETVF POWER SD CARD STORAGE ABOUT VIEW PHOTO/VIDEO TAKE PHOTO, START/STOP RECORDING START/STOP RECORDING TROUBLESHOOTING GUIDE WHAT WHY SOLUTION The CGO2-GB keeps vibrating after initializing. CGO2-GB may not be mounted securely to the transfer board. Make sure the CGO2-GB is slided onto the transfer board until it locks . Otherwise, the center of gravity will be incorrect.
The CGO2-GB does not function or respond. CGO2-GB may have been moved during initialization. Cycle the QX1 power on/off by switching on/off. CGO2-GB can not be powered on. CGO2-GB control harness may not be connected into the correct port. If using GB2 GB with QX1, be sure to connect the power cable from QX1 to the slot on CGO2-GB. CGO2-GB failed in turning back to the front CGO2-GB may not have Check CGO2-GB yaw axle positive connection control cable, if necessary via yaw axle cable.
Using an USB cable: 1. Turn off the power switch on QX1. 2. Connect CGO2-GB to the computer using the included USB cable. 3. Double click ‘My Computer’, locate and double click ‘Removable Disk’. 4. Double click ‘DCIM’ folder icon to view all Photo and Video files. 5. Copy your precious files to the computer. Using Micro card: 1. Turn off the power switch on QX1. 2. Take the T card out of CGO2-GB and insert it in the T card slot of your computer. 3.
2. Power on CGO2-GB (turn on the “ON/OFF” button on QX1). 3. Open your device’s Wi-Fi settings and connect to the CGO2-GB_****** network. 4. Enter the password ‘key’ located on the CGO2-GB. 5. Open the CGO2-GB App on your smartphone or tablet. Now, you will be able to control the CGO2-GB with your smartphone or tablet, plus adjust settings. SAFETY WARNINGS This symbol means that according to the local laws and regulations your product should be disposed of separately from household waste.
(1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning· The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s).
RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
out of or related to the use of or inability to use the product, even if Yuneec has been advised of the possibility of such damages. In no event will Yuneec’s liability exceed the amount paid by you for the product. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Copyright 2014 Yuneec