BWC-R3 User manual
Content 1. Introduction ................................................................................................................................. 1 2. Structure design........................................................................................................................... 2 2.1 Front view ........................................................................................................................... 2 2.2 Back view........................................................
1. Introduction BWC-R3 is a intelligent body worn camera specifically designed for Law Enforcement. The camera features real time HD video, 4K recording, support built-in 4G, WIFI and GPS function, and a high resolution still image capture visible on the LCD screen for instant playback, with wide angle; The rugged design is resilient to withstand demanding work environments faced by law enforcement officers, corrections, military and security detail.
2. Structure design 2.1 Front view Item Name Description 1 Working indicator Red blinking means video recording, yellow blinking means audio recording, solid green means standby or preview mode.Blue light means live video transmission. 2 IR sensor The sensor will detect the brightness of the environment, and then activate the IR light and switch to night vision mode. 3 Lighting Short press the F button to enable the light for auxiliary lighting.
2.2 Back view Item Name Description 11 Second camera The second camera, which for video call, face unlock and so on. 12 PTT button Press this button can start to talk with other devices that connected to the server. 13 Snapshot Press this button to start capture the snapshots, even during video recording mode. 14 Audio REC button Press the button to start the audio recording only. 15 Flag button Press this button during recording, it will make the recorded video as a marked video file.
3. Basic Operations 3.1 Live view window The body worn camera LCD screen is a small monitor to display various camera information and operation status. Item Name Description 1 Video recording icon Yellow icon means video recording is working.
Icon definition: This table will mentioned all the details about the icon that will display on the top line in the preview screen of the camera. Recording Icon This icon means the camera is under video recording status. Snapshot Icon This icon means the camera is capturing the pictures Audio REC Icon This icon means the camera is recording audio only. SOS Alert This icon means the camera triggered SOS alert success. Only when the camera connected to server can trigger this alert.
3.2 Main menu In preview mode, press home key to enter into main menu interface, you will see the interface as follow: 1 Cam Enter into the preview of the camera 2 Play Playback the local video, audio and images. 3 Setup Setup all the parameters of the camera 4 Talk Start the intercom function with other camera, video and audio call, as well as group talk.
7 Security password Turn on the login password or not 8 Device password Setup the device password 9 Indicator light ON, OFF 10 Face encryption Enable the face encryption function 11 Watermark Type the watermark info here 12 Preview mode Select the preview screen mode 13 Preview mode Select the preview screen mode 1. Brightness Adjust the brightness of the screen, just drag the icon to adjust. 2.
when you want to use the function, you need to unlock by face recognition. 11. Watermark In this option, you can setup the information that will overlay on the recording files, support 20 characters at most. 12. Preview mode Choose the preview mode, 16:9 is not full screen, 1:1 is full screen. SETUP>>>>>MEDIA : ID Menu Options REC codec H.264, H.
2K 2560*1440 30FPS 4K 3840*2160 30FPS 2. Video quality Select video quality based on the need of video recording. High means the best quality, which will encoding with big bit rate. 3. Segment time Segment time selection defines the length of each video segment, and this option only is used for video recording, invalid for audio recording.
before the video recording button is pressed. 8. Post-recording Post-recording means how long the camera should continue to record after the video recording button is pressed to stop recording. 9. Motion detect When the option is on, if there is something moving in the camera, the camera will start to recording. You can press the recording button to stop recording. 10. GPS watermark When the option is on, the GPS info will display in the video image, even in the recorded video and streaming video. 11.
Select to turn the hourly notice ON or OFF, it will give the voice report hourly if the switch is ON. SETUP>>>>SEVER ID Menu Options 1 Sever Configure the server IP, port and user number. 2 Platform QR code Scan a QR code to setup the server IP 3 Stream H.264, H.265 4 Bitrate Select different resolution and bitrate for streaming 5 Upload frequency 0~999 seconds optional 6 FTP Setup the FPT information for uploading 7 Geo-fence alert ON,OFF 1.
SETUP>>>>SYSTEM ID Menu Options 1 WAN OFF,ON 2 Mobile data OFF,ON 3 Bluetooth OFF,ON 4 Location GPS, GPS+Beidou, Beidou 5 Date and Time Setup the time of camera 6 Offline connection OFF,ON 7 About All the information of camera 8 Default setting Drag the icon to adjust 1. WAN Enable it, so the camera can connect to WIFI network. 2. Mobile data Only when this option is on, the 4G network can transmit the live video to center server. 3.
4. Device using 1. Turning On the Camera In power off status, long press for 3 seconds, the camera will be turn on and enter into preview mode automatically. Meanwhile, the status indicator will turn green. 2. Turning off the camera for 3 seconds, the camera will save the current status and In preview mode, long press power off. Meanwhile, the status indicator will turn off. 3. Recording Video In preview mode, short press to start recording.
8. Parameter configuration Click HOME key to enter the menu interface,and click Setup icon to enter into the parameters configure interface, you can setup all the camera parameters here, such as resolution, network settings and so on. 9. Intercom Click HOME key to enter the menu interface,and click Intercom icon ,enter into the intercom interface , and select online users for video or voice intercom, you can finish it by sliding the end button. 10.
2. Charging the Battery Remark: When you recharge the body camera, please make sure it is OFF. Also, even you don’t use the camera for a long time; please recharge it every 3 months. 1.Charge the camera Connect this camera and adapter via USB cable, and connect adapter to power supply to charge the battery. In charging status, the status indicator will turn red. Once the battery is fully charged, the status indicator will turn green.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.