Coolpad 8166G2 User Guide 1
Your Coolpad 8166G2 is a business assistant smart mobile phone supporting two GSM cards online at the same time. Besides basic features, such as making calls and sending text messages, this device owns the following distinctive features: z Easygoing wireless Internet access. Over a GPRS network, you can surf the Internet, receive and send e-mail messages, and so on. z Powerful business assistant. Convenient features such as calendar and tasks enhance your efficiency in business activities.
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. z Caution: This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please follow the correct procedure to switch off the device.
equipment. Some electronic devices are susceptible to electromagnetic interference sent by phone if inadequately shielded. Please use phone at least 20cm or as far as you can from TV set, radio and other automated office equipment so as to avoid interference. z Caution: Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government.
The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health. The exposure standard for wireless fixed phoned employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limits set by the FCC are 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting as its highest certified power level in all tested frequency bands.
In general, the closer you are to a wireless base station, the lower the output power. z The Highest SAR Values for this model phone when tested for use on the body were 0.622mW/g. z For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used whit an accessory that contains no metal and that positions the handset a minimum of 1.5cm from the body. z z Thank you very much for purchasing our products. Changes to product details are possible without prior notice.
This guide is applicable to the Coolpad 8166G2 mobile phone. If descriptions in this guide vary from the actual device, please refer to your handset for actuality.
Contents 1. GETTING STARTED..................................................................................................................................1 1.1 VIEWING YOUR DEVICE .........................................................................................................................1 1.2 SIM CARD ...............................................................................................................................................4 1.3 BATTERY ....................................
INPUT METHODS.........................................................................................................................................13 3 CALL FUNCTIONS ...................................................................................................................................16 3.1 MAKING A CALL ....................................................................................................................................16 3.2 SPEED DIAL ........................................
5.5 COPYING CONTACTS ON SIM CARD TO PHONE ................................................................................29 5.6 COPYING CONTACTS ON PHONE TO SIM CARD ................................................................................30 5.7 VIEWING ASSOCIATED INFORMATION OF A CONTACT ........................................................................30 6 MESSAGES.................................................................................................................................
9 PDA..............................................................................................................................................................44 10 CALENDAR..............................................................................................................................................46 11 TASKS .......................................................................................................................................................47 12 OFFICE .................
16 CAMERA...................................................................................................................................................54 17 GAMES .....................................................................................................................................................56 18 NOTES ......................................................................................................................................................57 19 MEMOS .....................
GSM1 & GSM2 .........................................................................................................................................71 25 DIAL-UP....................................................................................................................................................76 CREATING A CONNECTION .........................................................................................................................77 DIAL-UP CONNECTION ..................................
29 BACKUP ...................................................................................................................................................94 30 TOOLS ......................................................................................................................................................97 31 WAP ...........................................................................................................................................................97 BROWSE WEB PAGES ........
1. Getting Started 1.1 Viewing Your Device Your Coolpad 8166G2 is a dual SIM cards dual standby business-assistant smart phone. It has not only basic communication function, but also powerful PDA function, which helps you enjoy entertainment in your spare time. Fig.
Table 1.1 Key Functions of Shortcut Keys Application/Interface Functions Press and hold it to go to the Call Log interface. When an incoming call arrives Press it to answer the call. Call Key Press it to dial the number that the cursor is In Call Log/Contacts currently highlighting. Keypad Press it to dial the number. During a call Press it to end the call. In the text entry interface Press it to delete character(s). In any application In view status, press it to exit the current window.
screen. press briefly to call out the drop-down menu of in standby and home screen Select Profile Function Key In playback interface of Play video files in full screen Coolpad Player When an incoming call arrives Volume Keys Press it to turn off the buzzer. During a call/ In playback Press it to adjust the volume. interface of Coolpad Player Power Key When LCD is on, Press it to turn LCD off. Or press it to activate your phone. Shutter Key Enter Photo mode.
1.2 SIM card Procedures for inserting a SIM card: Caution 1. Switch off the device before replacing, inserting or removing SIM card; otherwise, a fault may occur to the device; 2. Take care of SIM card. Do not bend or scratch it, nor exposure to static electricity or water.
1.3 Battery 1. Plug one end of the data cable into the USB of the charger, and then connect the charger to a power outlet; 2. Plug another end into the I/O jack of the device; 3. Upon completion of charge, unplug the data cable from your device, and then disconnect the charger from the power outlet. Prompt 1. Your device can monitor and display information concerning the battery. Tap on the status bar to display the power level. 2. When the battery is charging, if your device is ON, indicator 3.
battery in time. 4. You can charge the battery at any time, even if the device is off or switching on. Charging upon switching on will not compromise the device performance. 5. You can not use a desktop charger and an USB cable to charge the battery at the same time. (For USB jack, the output voltage is 5V and the current 250mA. It can be used to charge any device that below 250mA, e.g. Bluetooth headset.) Caution: Please follow the correct procedures to switch on/off the device.
switches to Normal mode automatically when activated. To switch to Private mode, follow the procedure below: 1. In any interface, use the stylus to scratch the screen from the top to the bottom incessantly; 2. In the pop-up box, select Private Mode as the active mode; 3. Enter the correct private password; 4. Select the application you want to access, or change the password.
Caution: Folders marked as private can only be accessed in Private mode.
2 Basic Operations Switching the Device On/Off 1. When the device is ON, press and hold the Power key until the Shut Down dialog box appears, where you can select Shut Down to switch off the device or select Disable/Enable Antenna to disable/enable the communication feature; 2. When the device is OFF, press and hold the Power key. Select the power-on mode from the Please Select Mode dialog box according to your needs. 3. The Power key can also serve as the Inactivate/Activate key.
as shown in table below: Function and Relative Operations Indicators Indicates signal strength, tap it to view network status. Battery is full. Indicates power level. Tap it to view current power level. The battery charge is low. The battery is charging. A call is in process. You have missed calls. Tap it to view details of the missed call. You have unread SMS messages. Tap it to view details of the unread message. Maximum of SMS messages on the SIM card reached.
The device is connected to the PC or the internet. The device rings only when an incoming call or a new message arrives. Tap it to view the active profile, ring tone volume, vibration and mute status. The device both rings and vibrates when an incoming call or a message arrives. The device vibrates only when an incoming call or a message arrives. The device neither rings nor vibrates when an incoming call or a message arrives. There is a memory card inserted. There is an alarm set for the event.
Slots are being detected. Network register is in progress. Indicates active profile. Tap it to pop up a drop-down menu, on which you can switch profiles. The active profile is Flight. The active profile is Meeting. The active profile is Outdoor. The active profile is Quiet. The active profile is VIP. Tap it to show/hide the input panel. Call an application when several applications are launched.
Input Methods This device supports multiple convenient text input methods, which are available in all text input/edit areas. Tap the input panel icon changes to in the upper right corner of the screen. Then it . z Handwriting input method The following describes how to enter English letters in the handwriting input mode: 1. Write an English letter in the Graffiti area. Then, all candidates are displayed in the candidate character list. Select the one you desired.
3. Tap your desired letter in the candidate character list and its related words are displayed in the candidate character list. Tap the word you desired to enter it or write next letter directly. If the one you desired is not included, tap to scroll through the list. z Full screen handwriting input This device supports full screen handwriting input. You can adjust the stoke width in Settings>Input Panel. z ABC and Abc input method (as shown in Fig. 2-1) Fig.
Enter text with physical keyboard Besides using stylus and virtual keyboard, you can enter text with the physical keyboard. To use the physical keyboard, you need to tap to show the input panel first. Once input panel shows, you can press the * key on the physical keyboard to switch among various input methods, press the End key functions to delete characters and press the centre of 5-way joystick for confirmation.
3 Call Functions 3.1 Making a Call You can make a call using one of several methods provided below: or 1. Input a number in the input field and then tap 2. If you want to dial the last number you dialed, tap . directly and then tap or . Table 1 Different displays of one button displayed in different cases. is used to redial the most recent number you dialed after last power on. If you did not make a call after last power on or the number-input field is not empty, is displayed.
Delay: The remaining number following P is automatically dialed out 4 seconds later after the call is connected. You can input several Ps continuously, and 4 seconds delayed for each P. Pause: After the call is connected, the remaining number following W is sent only when you tap . Different display formats of one button in different cases. Usually it is displayed as , used to input international long-distance number; if tapped or input a number, it switches into number in the input field upon one tap.
Designed for GSM2 card. You can tap it to dial the number you input. IP dial: the left button is designed for GSM1 card and the right one for GSM2 card. Tap it and you can dial the number you input with IP number added. When inputting a number, you can use any of them to find a contact number. Key is used for number association find and for letter association find. Save the number input in the keypad to Contacts; during the call, save the number input in the keypad to the temporary numbers of Call Log.
Switch to the Call Log interface Switch to Speed Dial Fig. 3-1 Fig. 3-2 If you only remember several consecutive digits of the number, you can enter them to find matched entries by number association (as shown in Fig. 3-1).
When the desired contact appears in the contacts list in the course of inputting numbers, you can use the up/down key of the 5-way joystick to move that entry. When that contact is in the input field, you can press Call key or tap / to make a call to him/her. If you remember the contact’s name, you can use letter association to find the contact. Tap on the keypad and input the first letter of him/her name. For example, the initial of Maya, M, is on number key 6 of keypad, as shown in Fig. 3-2.
3.2 Speed Dial Creating a Speed-Dial Entry 1. Tap a blank entry in the Speed Dial main view; 2. Enter related information, and then tap Save. To create a shortcut to the file stored on your phone or memory card, select Add Shortcut. Editing/Deleting a Speed-Dial Entry 1. In the Speed Dial main view, press and hold the speed-dial entry to be edited/deleted until a shortcut menu pops up; 2. Select Delete from the pop-up menu to delete the entry. 3. Or select Edit to edit the entry.
GSM1_IP Dial, GSM2_Dial and GSM2_IP Dial). You can make a call by selecting a dialing mode or press Call key on the physical keyboard. Tip: For the speed-dial entry imported from Contacts, deleting it will not delete the corresponding entry in Contacts. 3.3 Answering a Call In the interface for answering a call, select Keypad and the interface switches to the keypad application. Or select Handfree to answer the call handsfree.
During a call, tap , and then select Contacts from the pop-up menu to display the Contacts interface. Tips: During a call, is displayed in the status bar, indicating a call is in process. z Three-Party Service This device supports the three-party service. During a three-party conference call, you can switch between calls, drop a party, hold a call and end calls by tapping the corresponding buttons. Tips: The availability of this feature depends on the network system.
as you answer the second call. And current interface for the first call switches into other interface. During a call, you can adjust the call volume by pressing the Volume keys on the left side of the device. The volume you adjusted is regarded as the default volume next time the call is connected.
2000 records. Operations Available in Call Log 1. On the Call Log main view, double tap an entry to display the Details interface; 2. On the Details interface, tap the phone number to show the shortcut menu. Then you can perform operations by selecting corresponding options from the menu; 3. On the Call Log interface, tap the Dial button to call back the number contained in the current entry.
Tips: It is recommended that you store all the contact information on the device for modifying or saving contact information better. 5.1 Creating a Contact on Phone 1. In the Contacts main view, tap the New button, and select Contact on Phone from the pop-up menu. 2. Enter the information that you want to record in the input area, select options from the drop-down list box, if available, and then tap Save. 3. Select to enter notes about the contact. For details on notes, refer to Section 24.
5.2 Contact and Group 1. In the Contacts main view, select Contacts > Group > Add > Add to Group; 2. Tap in the right-upper corner of the title bar, and then select the contact range from the drop-down list; 3. In the event of many contact entries, you can search for specified contact entries by tapping 4. ; Select desired contact entries, or select all entries by tapping Sel.All. To cancel the selection, just tap ClrAll; 5.
mode from the pop-up menu. Method III: 1. Double tap a contact entry to display the details interface. 2. Press and hold the number to be dialed to display a pop-up menu. Then, select a dialing mode from the pop-up menu: Edit & Dial, IP Dial (GSM1 or GSM2), and Dial (GSM1 or GSM2). Tap it and make a call. 5.4 Quick Location The device provides you with the quick location feature ( ), which allows you to find a specific contact entry quickly.
find a contact entry, just tap digits corresponding to the initial letters of the contact name. Tips: The more detailed information you enter, the more quickly the contact is found. 5.5 Copying Contacts on SIM Card to Phone 1. In the Contacts main view, select Contacts > Copy > SIM to Phone, and then select a contact group; 2. Tap Sel.All, and then tap Copy to copy all contact entries to the phone.
5.6 Copying Contacts on Phone to SIM Card 1. In the Contacts main view, select Contacts > Copy > Phone to SIM; 2. Tap Sel.All and then tap Copy, and select the card type to copy all contact entries to the selected card. Also, you can select one or multiple entries, tap Copy, and then select the card type to copy the selected entries to the selected SIM card one by one or by batch. 5.
Fig.5-1 Fig.
6 Messages 6.1 Writing an Short Message Tap New in the Messages main view, to display the New interface: 1. Directly enter a phone number in the input field or tap to select one from Contacts; 2. Enter contents: Enter the contents to be sent in the content box. The numbers in the title bar show the number of characters you entered and the total number of characters that can be entered; 3.
to save this message, by default, to the Drafts. z Create a custom folder 1. In the Messages main view, select Messages > Folder > New; 2. Enter a name for the folder; 3. Set filter rule: Directly enter a phone number in the input filed beside Contacts, or tap Contacts to add multiple numbers or select numbers from Contacts. After creation, messages from or to numbers that you specify will be saved to the custom folder automatically. 4.
Tips: You can only delete a custom folder. A system folder cannot be deleted. Settings In the Messages main view, select Messages > SMS Settings > General Settings, Cell Broadcast or Special Settings, to display corresponding interface. Enter related information, and tap OK, or tap Default to restore the default settings. ·Signature: If you enter a signature here, the signature is attached automatically every time you edit a message.
message to be sent, and tap OK. Then, when you have a message from a phone number stored in Contacts, the message containing the preset text will be sent to the number automatically. Tips: 1. For details on the SMSC number and voice mailbox number, please contact your network service provider. 2. Tap and hold a message with your stylus and the short-cut menu will pop up. 6.
Fig.6-1 1. Directly enter a mobile number or an E-mail address in the input field or tap To to select a recipient from Contacts; 2. Enter the subject of the MMS message; Insert images, texts or audio files as required; 3. Tap Preview to preview the MMS message; Tap Send to send the MMS message; 4. Tap Save. By default, the message is saved to the Drafts.
MMS Settings In the Messages main view, tap Messages > MMS Settings in the title bar to show the Settings interface. You can set corresponding function and tap OK to save you changes, or tap Default to restore system default settings.
7 Web The web browser application of this device allows you to surf the Internet at any time in any place. With this device, you can access any WEB pages. Tap to display the Net Connection interface. Please select the corresponding connection according to your card type and tap Connect. Then, the system will access the network automatically and open the homepage that you set. ¾ File: on its drop menu, there are Open, Save As, Work Offline and Close.
: Return to the upper-level directory : Stop downloading from the web page : Refresh the web page : Return to the homepage : Search Caution: Availability of Internet access depends upon whether your network carrier provides this service, and whether you have subscribed to this service. For details, please contact your network carrier. The option is unavailable temporarily if it is displayed in grey.
8 E-mail With your device, you can send, receive, manage and sort e-mail messages conveniently. The Coolpad 8166G2 e-mail system is compliant with not only the common POP3/SMTP protocols, but also the IMAP protocol and simple HTTP Mail protocol. Managing Accounts To receive and send e-mail messages, you must have an e-mail address. You can access a website to sign up for an e-mail address or use an existing one. Creating an Account 1.
3. In the Account Settings interface, enter corresponding information and then tap Save. Tips: For information of POP3 and IMAP, please contact your service provider or check out the corresponding website. Account Manager In the E-mail main view, select E-mail > Account Manager to display the interface for managing account. All existing accounts are listed in the list area. Buttons in this window include New, Delete and Set as Default, etc.
1. Enter a recipient’s address in the To field or tap To to select one from Contacts; 2. Enter one or multiple e-mail addresses to which you want to send the copy of the e-mail in the Cc field. You can enter directly or select from Contacts as you do in step 1; 3. Enter the subject and contents; Then tap Sender Addr and select an e-mail account from the pop-up menu, or directly tap Send to use the default account; Tap Save to save the e-mail to the specified folder; System Settings 1.
Remote Manager This feature allows you to conduct operations to e-mail messages stored on the server directly before downloading them. In the E-mail main view, tap E-Mail > Remote Manager or tap the Rmt Mgr button, to display the interface for remote manager. 1. Tap in the title bar and select the account you want to manage from the drop-down list; 2. Tap New Mail to retrieve headers of e-mail messages that are not retrieved from server; 3.
9 PDA Itinerary The itinerary application can help you to arrange plans like vehicle, hotel, meeting and scheduled events, and remind you of upcoming event in time. If you have a calendar arrangement during the period of this itinerary, a calendar icon will be displayed as well; tapping it you can view the corresponding calendar arrangement. This application can also let you to notify the people concerned via messages or e-mails. Creating an Itinerary Entry 1. In the Itinerary main view (as shown in Fig.
you can fill in contents according to items listed. There are two methods to select a vehicle: 1. In the interface of new itinerary, tap the vehicle icon to make selection. 2. In the interface of a concrete vehicle template, you can choose from the drop-down list of vehicle field by tapping the down arrow.) When filling in other sub-itinerary: ) Tap the blank area of time or time zone field can make settings to time or time zone.
10 Calendar On the PDA home screen, tap to enter the Calendar interface. Creating a Scheduled Event Tap New in any view interface to enter the editing interface, or tapping an interval or pressing and dragging to select an area with the stylus in the day view or week view. 1. In the interface for adding a scheduled event, fill in the event information. 2.
displayed. See “Editing a Folder” in “Itinerary” for more information on creating a folder. to edit a remark. For details, please refer to “Notes”. 3. Tap 4. Save: Save the current settings when finished. 11 Tasks On the PDA home screen, tap to display the Tasks main view. The descriptions of the main view are as follows: 1. The figure in the title bar indicates the total number of tasks in the current interface and the relative location of the selected task in the list. 2.
2. Tap in the title bar, and choose a folder. See “Itinerary” for more information on creating a folder. 3. Tap the icon to edit notes. See “Notes” for more information on tools available in this interface. 4. Save: Save this task. 12 Office On the PDA home screen, tap the icon to enter the office module. The Office application module provides you with general tools such as PDF, PowerPoint, Word, Excel and WordPad. With this feature, you can view or edit documents stored on the Micro SD card.
13 My Files On the PDA home screen, tap the icon to display its main view. With the My Files application, you can view, delete and send contents stored on this device and T-Flash card. You can manage contents in the window using options available. In the title bar, tap File, Edit, view or Go to pop up a drop down menu, then you can execute corresponding operation according to its function options. Caution: The option is unavailable temporarily if it is displayed in grey.
Date and Time: You can set three different date and time in different time zones. Tap the clock tray, date display area or time zone display area can set the corresponding items. Alarm: This device can support six alarm clocks at one time。 Calendar: Can select a day (1950-2050 A.D) to view. Stopwatch: You can use it to account seconds. Tap Record to record lasting seconds. Timer: You can set four timing which can process at the same time.
Multimedia 15 Coolpad Player Coolpad Player supports both audio and video playing. With this feature, you can play not only files in the format of MP3, WMA, AAC, WAV, but also MP4 and 3GP audio-visual files. This feature enables your phone to be a real pocket multimedia audio-visual device. Fig.15-1 Fig.
Playing an Audio-Visual File Please select CP Player > Open File in the title bar to play an audio-visual file. Then, you can browse any file stored on the device from My Device list box. If you have inserted a Micro SD card in your device, you can open any file stored on it that can be played by the player. If lyrics (lrc format) are available for the MP3 file, and they are under the same directory with the same file name (e.g. the corresponding lyrics of file abc.mp3 should be lrc.
Fig.15-2). Select a file in some folder and tap In the play list, tap the to add your favorite audio-visual file into play list. button to play the select file directly. When play a video file in full screen, you can adjust the volume by dragging the 5-way joystick to left or right side.
16 Camera The Camera application supports video recording and taking a photo in full screen. With a 1.3 mega-pixel camera, the device can take static digital photos with a resolution of up to 1280 x 960. You can tap or press the Shutter button to enable this application. Fig. 16-1 Fig. 16-2 Main view Tap the Settings button to pop up a shortcut box for setting options.
pop up its concrete contents, and then you can make selection. Taking a Photo You can enter the shooting mode by default after enabling this application or selecting Photo in the mode selection. After setting various parameters of your camera, focus on the subject and press the Shutter button or press the center of 5-way joystick to complete shooting. The photo taken is automatically saved to the storage location you selected. If you tap , a confirmation prompt pops up, informing you of the deletion.
Skills: When taking photos, you can press the up\down of 5-way joystick to switch the mode; press the left\right to set or browse view. The focal length can be adjusted by the volume key. Caution: Please select distance-view mode by the pole of camera lens. 17 Games This device provides you the game GoBang, which helps you to relax fully in entertainment. GoBang Based on the traditional game settings, this game are enhanced to make the game more flexible.
18 Notes The Notes application is a graphic memo, just like a simple graphic editor. With this feature, you can edit some simple graphics. In the Notes main view, select an entry and tap the title bar Notes to pop up a drop down menu. You batch delete, rename/move, set initial SN of auto-name and display properties for this entry. You can also directly tap New, Delete and Find to execute corresponding operations.
19 Memos With this feature, you can store daily memos information and create 100 memos at most. 1. Select Memos > Custom Category to create a new category; select Memos > Set to enable data protection password; 2. In the Memos main view, press and hold an entry to pop up a menu, and then select options from the menu to execute corresponding operations to the memo. Prompt: When a category is deleted, all records under it are moved to the Others category instead of being deleted.
3. Tap 4. Tap Save to finish creating a new memo. in the title bar and select a category for the memo. Method II: In the menu bar, tap Memos > New to display the interface for creating a new memo. Other operations are the same as above. Setting as Private In the Private Mode, in the Memos main view, press and hold a memo entry to pop up a menu, and then select the option Set as Private in the menu to mark the memo as private.
20 Ringtones The Ringtones application allows you to store and listen to fair-sounding music.
21 Album Tap to display the Album main interface. The Album application has powerful image processing functions such as manage and browse images, and supports interaction with such modules as E-mail and Camera.
operations such as setting as wallpaper, marking image and making settings for slide show and so on. Browsing Images: Supports thumbnail mode (as shown in Fig. 21-1), list mode (as shown in Fig. 21-2) and slide show mode.
22 Recorder This application provides powerful recording feature for you. Tap to display the Recorder main interface. With the function buttons, you can perform corresponding operations such as recording, searching and deleting.
23 Settings With this feature, you can set this phone according to your needs. Tap the main menus Control Panel and View in the left upper corner. Select corresponding options in the pop-up menu. Backlight With this feature, you can change backlight property, to set backlight time when using different power supplies and to adjust the backlight intensity. Calibrate Screen With this feature, you can calibrate the handwriting location of phone touch-screen.
Tap Set Pwd to enter the Set Password interface. Enter the old password, new password and confirm the new password. Tap OK to save your change. Prompt: This data protection password is applicable to all passwords used in all function options. Device Info With this feature, you can set up the device information and view IEMI NO., hardware version, software version and system version. Input Panel With this feature, you can change the current input panel options of your phone. 1.
Caution: Setting of stroke width is only applicable to handwriting input in full screen. Internet Options General ·Start Page: Enter an URL address as the default start page of the Web browser. ·Search Page: Enter an URL address as the default search page of the Web browser. ·User Agent: Select the user agent of the Web browser. ·Cache Size: Enter the cache size available when a web page is opened. ·Clear Cache: Delete the contents stored in the cache of the browser.
·Address: Enter the address of the proxy server to be used. ·Port: Enter the port of the proxy server to be used. ·Bypass proxy server for local addresses: Enable or disable the feature of bypass proxy server for local addresses. Privacy ·First-Party Cookies: Select the processing mode of the first-party cookies. ·Third-Party Cookies: Select the processing mode of the third-party cookies. ·Always allow session cookies: Enable or disable session cookies.
Power-on Password With this feature, you can set or change the power-on password. Caution: Please remember all passwords you have set. There is no way to retrieve the password if you forgot it, which will result in loss of data on the phone. Language With this feature, you can select the language for display. Remove Programs With this feature, you can delete programs in the device. Standby Screen With this feature, you can set the options displayed on your standby screen.
World Time With this feature, you can change the date, time and time zone displayed on your phone. 24 Call Settings With this feature, you can set corresponding options of GSM1 and GSM2 according to your needs. Moreover, you can use network services. If you want to use these network services, please contact your network service provider for their availabilities.
these network services. Tap Call Settings to display the main view. General Auto answer In the Call Settings main view, select the check box Auto answer to implement this feature. To disable this feature, you can just cancel the selection of this check box. Default network You can set this option in the Call Settings main view. If selected, your phone will directly activate communications module in the system’s default mode.
GSM1 & GSM2 IP Number This device permits you to preset an IP number. Thus, you only need to long press a phone number and select IP Dial from the pop-up menu; or enter a phone number on the keypad and then tap the IP key. Without entering the IP number manually, the system will automatically add the IP number you set before the number to be dialed. You can set IP number as follows: In the GSM1 Settings or GSM2 Settings interface, tap IP Number to display the interface for setting the IP number.
Select whether to use the security lock. Set Power-on PIN code: The PIN code is supplied with the SIM card by your network service provider. To enable the power-on PIN code, you need to perform the following actions: 1. Tap Security. Then, the security setup interface appears. 2. Select the check box Enable PIN. Then, the interface for entering the PIN appears. Enter the correct PIN code obtained from the network service provider, and then tap OK.
Prompt: To disable the power-on PIN code, cancel the selection of the check box Power-on PIN. Before cancellation, you are prompted to enter the PIN code, and the power-on PIN can be disabled only when you enter the correct PIN code. Caution: The SIM card will be locked upon three times of wrong PIN entry. You need to enter the PUK code to unlock it. For details, please contact your network service provider. Fwd Call This feature allows you to forward incoming calls according to the related setup.
interface. The system will get and display the corresponding service status from the network. Or you can change the service status according to your needs. Prompt: If the interface turns to be gray, please conform that you have enabled this service and check the signal quality. For specific service contents, please contact your network service provider. Network In the GSM1 or GSM2 Settings interface, tap Network to display the Network Setup interface.
conversation with party B, you can continue the call with party A. Setting call waiting for the GSM network: After you have subscribed to the service, tap the corresponding button in the GSM1 or GSM2 Settings main interface to enable service, disable service or check status. Prompt: For specific service contents, please contact your network service provider.
25 Dial-up With this feature, you can create a dial-up network connection. Prompt: For specific information concerning username, password and phone number used in dial-up connection, please contact the corresponding network service provider. After you tapped the Dial-up icon on the Settings home screen, the following options are available for the main menu in the interface: ·Connect: Start a dial-up connection. ·New: Create a dial-up connection.
Connect, Delete, Rename and Properties mentioned above are available. Otherwise, they are in grey color and not available. : Start a dial-up connection. : Delete a dial-up connection. : view the properties of a dial-up connection. Creating a Connection On the Connection interface, tap Connection in the main menu and then select New from the pop-up menu, to display the interface shown in Fig. 25-1.
Fig. 25-1 1. Fig. 25-2 Fig. 25-3 Enter a name for the connection, select the connection type, and then tap Next to display the Modem interface, as shown in Fig. 25-2. 2. After selecting the modem, you can view and change configurations of the modem. Tap Configure to display the Device Properties interface, as shown in Fig. 25-3. 3.
7. After setting, tap Finish to save the settings. Then, the new connection is displayed in the Connection main view. Fig. 25-4 Fig. 25-5 Fig. 25-6 Dial-up Connection In the Connection main view, select a connection, or press and hold its icon to pop up a menu, and then tap Connect in the menu.
After inputting the user name, password, domain and phone number, tap the Connect button to connect to network. Upon successful connection, you can browse web pages or send and retrieve Emails. Tap Hide to hide the status window. Tap Cancel to disconnect from the network. For specific user name, user password, domain, and phone number, please contact your network carrier. Creating a Connection (Shortcut) Tap (New Connection) or press and hold to select New in the pop-up options.
Fig. 25-7 Fig. 25-8 Caution: If it is you first time to use this feature, after you created a new connection, you enter the Connection interface, tap Dial Properties and change the dial location to GPRS. Virtual Private Network Virtual private network (VPN) is defined as a temporarily secure connection via a public network (commonly Internet). It is an extension to the intranet.
Creating a virtual network Fig. 25-9 Fig. 25-10 Fig. 25-11 1. Select Virtual Private Network (PPTP) in Fig. 25-9. And then tap Next. 2. Enter the host name or IP address in Fig. 25-10. 3. Select Preview user name and password in the Security Settings as shown in Fig. 25-11. And then select OK to back, and tap Finish. 4. Now creating a virtual network connection is finished. 5. Open the Web. Do not disconnect from the network after you have opened a web page.
Return to main view to connect a virtual network. In the interface for entering network password, enter your user name and password. Select OK. If the connection to virtual network is successful, the screen will display Connected.
26 Connectivity 26.1 ActiveSync Preparation for ActiveSync Using the data synchronization application of this device, you can set up communication between your mobile device and the synchronization program on the PC, and implement data synchronization between the mobile device and the PC. Data synchronization on this device is implemented through a USB cable. Before synchronization, you should make sure that the mobile device is connected to the PC through the USB cable correctly.
Run the Coolpad Suite ActiveSync software on PC, register a user account and login. Now you can restore and synchronize the data backup. (ActiveSync program main interface) Fig. 26-1 Fig. 26-2 26.2 Modem Besides general features of a smart phone, this device can serve as an external wireless modem of a PC.
Internet using dial-up networking with your phone on the PC. Before that, you should install the Wireless Modem Driver Program on the CD packed with your phone. Tap this program icon and set according to prompts. 1. Tap to display the interface of the modem mode. Select Turn on modem. Connect the phone to the computer with a USB data cable, getting ready for communication with the computer. 2. Configure your computer according to the type of your SIM card.
Step 1: Add modem 1. Tap Connectivity. Tap to display the interface of the modem mode. Select a network and connection mode. Here we select the USB. And then tap Turn on Modem. When the Turn off Modem is displayed, please insert the USB data cable. The system will prompt you that a new hardware is found, tap Next. 2. Select Auto Installation. Tap Next, the installation wizard will search automatically. The system will pop up an installation warning in the process of installation.
installed in step 1. 2. Tap Properties and select Advanced. Enter the extra initialization command in Extra Settings. Tap OK to finish the setting. Step 3: Add dial-up connection 1. Double tap the My Network Places, select View network connection > Network Task List from the Network Task List. Tap New Connection. It pops up New Connection Wizard, then tap Next. 2. Select Connect to the Internet. Tap Next in the pop-up interface. Select Set up my connection manually, then, tap Next. 3.
7. Tap OK to finish the new connection. 8. Tap Dail-up in the pop-up Connection interface, the PC will connect it automatically. It displays the Dialing interface till the connection is succeeded. After that, icon of Connected is shown in the lower right corner of the task bar. 26.3 U-Disk This feature implements the free storage and access between Micro SD card and the PC. Insert a Micro SD card, and tap to display the interface of the U-Disk.
27 Profiles Profiles Feature Volume All applications are available (except VIP list) Standard volume Meeting All applications are available (except VIP list) Automatic mute, vibrate only. Outdoor All applications are available (except VIP list) Enhanced volume, ring plus General vibration Quiet All applications are available (except VIP list) Compared with General mode, the volume is smaller. Flight Communication features are disabled. Only PDA Standard volume features are available.
Selecting Profiles Tap the Profiles icon on the right upper corner of the main view. Select the mode you want to use and tap OK. Now the Profiles icon in the main view turns to be the corresponding icon you selected. Tap the Profiles icon in the Settings main view, and then tap OK after setting various values. Prompt: If you don’t select a profile after turning on your mobile device, it will use the mode last saved before turning off.
28 Call Filter If you don’t want to receive some calls or messages from some phone numbers, you can add these numbers to the blacklist. In all profiles, you can set a network strategy to numbers in the blacklist for calls and messages sent in some period of time. Numbers outside of the blacklist are the normal ring. If you want to receive calls and messages sent by some phone numbers only on certain period of time, you can add these numbers to the VIP list.
Enable group filter: Select the Set button in the main view to set call rules and SMS rules for a specific group. Adding a new group In the main view of Call Filter, double tap a group to display its group member list interface. Tap New to display the interface for adding a new contact. Add the name and phone number and then tap Save. You can also import the contact number from the Contacts. From other applications, press and hold a phone number to select it.
29 Backup This device provides you with the feathers of Data Backup and Data Restoration. Fig. 29-1 Fig. 29-2 Backup In the Backup main view, select Backup › New Backup.
Select the backup path (Phone or Memory card) and enter the subject for the backup. Select Full Backup in the backup mode. And then the system begins to backup all data. Select Custom Backup to back up the data you want to back up. In the Restore Data list, select the items to be backed up. Tap the Backup button. Tap Backup to pop up a list. Select Replace Original Backup. If you select to back up an item which you have backed before, the data will be overwritten.
Caution: If you select Phone as the storage location, the data is backed up to the USERDATA folder and it occupies some space which will affect performances of the whole device or other application. So, we recommend you to select Memory Card. Restore Select the data backup to be restored in the Backup List of the Backup main view. Tap Restore to pop up the Restore Data interface. In the Restore Data interface, select the data backup to be restored and perform corresponding operations.
30 Tools The Tools application includes Calculator, Currency Converter and Unit Converter. You are provided with various calculating methods such as general, scientific and basic calculating. In the Currency Converter interface, you can convert currency conveniently and quickly. You can also converse among length, acreage, bulk and cubage, avoirdupois and quality in Tools. 31 WAP The WAP application of this device allows you to surf the Internet anywhere at any time.
Browse Web Pages 1. Tap the icon of WAP to pop up an interface. A window of Net Connection displays. Select the corresponding options, and tap Connect. Then, the system will access the network automatically, followed by the browser interface. Otherwise, it will prompt that there is no response in server. Then, you should check whether the network connection settings are correct or contact the network service provider. 2.
:Go to the previous web page :Go to the next web page :Stop downloading and viewing the current web page :Refresh the web page :Return to the Home Page :View the Bookmark :Copy the text selected :View the History :Quick menu :Help Opening a Web Page You can open the web page you want to browse using one of the following methods: 1. Through the address field: Enter a URL in the address field directly, and then tap Input Panel or tap 2.
3. Through the history records: Tap besides the address field. Then, a drop-down list appears, which lists the history websites that you have accessed recently. Select a website entry to open the corresponding web page. Or tap the icon , and double tap the webpage you want to open. Also, you can tap History in the Main Menu to open the webpage. Open the homepage: Tap on the toolbar directly to open the preset homepage. 4.
Appendix I Dual-GSM & Dual-Working With the Coolpad TM 8166G2 dual-GSM & dual-working phone, you can enjoy the convenience of two SIM card and high-speed services of the GSM networks, In the main view, tap the icon to start the application. With this application, you can select your current SIM card and enjoy services of GSM1 and GSM2 networks freely.
Appendix II Technical Information Basic specifications Dimensions 116 mm × 54 mm × 21 mm Weight About 150 g Style Bar style Antenna Built-in SIM card Mini plug-in card Network mode GSM, GSM OS WinCE5.0 Processor TI OMAP730(200MHz) Memory DOC MCP(128M Byte Flash+64M Byte SDRAM) Built-in camera A 1.
Display parameters Type Transflective TFT Size 2.4" QVGA LCD Pixel 320 × 240 Color resolution 262,144 colors Screen type Transparent resistance touch-screen Backlight High bright white backlights Main features supported(see actual product) English input Word, association, numbers, handwriting and Input method methods full-screen handwriting 2000 Call log Maximum number Functions of viewing received calls, missed calls and call duration are provided.
3000 Contacts Maximum number The function of reminder in adding new contacts is provided. 2000,SMS and MMS in one Group sending to 500 recipients is support. Messages Maximum number Inbox, sent, drafts, outbox and trash is provided.
Security SSL 2.0 and TLS 1.0 Receiving mail Supports POP3 Email GPRS server Sending mail server Supports SMTP Content encoding Conforms to the MIME specifications GPRS Surf the Internet anywhere at any time when Modem built-in the modem and PC are connected. Name Lithium-ion polymer rechargeable battery Model CPLD-18 Rated capacity 1500 mAh Nominal voltage 3.
Appendix III No. Phone Standard Equipment List Name Quantity No.
Extension application 9 1 19 guideline(inside the printed) installation CD) 10 Warranty card Package box (Barcode 1 107 1
Appendix Ⅳ Toxic substances or harmful elements statement According to the related regulations and requirements of Electronic Information Products Pollution Control Measures in People’s Republic of China, Yulong classifies its handsets by items to state the toxic substances or harmful elements in its handsets. The statement is as follow.
O:Indicates that this hazardous substance contained in all homogeneous materials of this part is below the limit requirement in SJ/T 11363-2006. X:Indicates that this hazardous substance contained in at least one of the homogeneous materials of this part is above the limit requirement in SJ/T 11363-2006. All items with “x” are in line with the EU RoHS regulations.