REVVL PLUS User Guide
Table of Contents TABLE OF CONTENTS ................................................................... 2 GETTING STARTED ........................................................................ 1 Device Layout ........................................................................................... 1 Main Keys ................................................................................................. 2 Charging the Battery ............................................................................
Contacts ................................................................................................. 19 Messaging .............................................................................................. 20 Email....................................................................................................... 21 Calendar ................................................................................................. 21 Camera .................................................................
Getting Started Get off to a running start with your new REVVL PLUS! Device Layout Front camera Receiver Headset jack Light/proximity sensor Rear camera Flash Volume key Power key Fingerprint recognition sensor Loudspeaker Back Recents Home USB port 1
Main Keys Key Function Power • Press and hold to turn your phone on or off. • Press to turn on or lock the screen. Recents • Tap to open the list of recent apps. Home • Tap to return to the Home screen. • Tap and hold to activate Google Search. Back • Tap to return to the previous screen. Volume • Press to adjust the phone volume. Charging the Battery 1. Connect the Micro USB end of the data cable to the Micro USB port on your device. This is located on the bottom of your phone. 2.
SIM Card 1. Insert the ejection pin into the hole to open the SIM card tray. microSD Nano SIM 2. Gently pull out the SIM card tray gently. Place the Nano SIM card in card slot 1. If you have a microSD card (sold separately) place it in card slot 2.
Touch Screen Tapping: To open an app, to select a menu item, to press an on-screen button, or to enter a character using the keyboard on the screen, tap it with your finger. Tapping and holding: Tap and hold an item or the screen for more than 2 seconds to access available options. Dragging: To move an item, tap and hold it and drag it to the target position.
Double-tapping: Double tap on an image to zoom in. Double tap again to zoom out. Swiping: Swipe to the left or right on the Home screen to view other panels. Spreading and pinching: Spread two fingers apart on a map or image to zoom in a part. Pinch to zoom out.
Home Screen Basic Layout Status bar Google Widget App folder Screen indicator Apps screen Customizing your Home Screen The Home screen displays widgets, favorite apps, and more. To view other panels, swipe to the left or right, or tap one of the screen indicators at the bottom of the screen. On the Home screen, tap and hold an empty area to access the available options, including changing wallpaper settings and adding widgets.
To add an app, tap and hold it from the Apps screen, and then drag it to the Home screen. To add widgets, tap and hold an empty area on the Home screen, tap WIDGETS, tap and hold a widget, and then drag it to the Home screen. To move an app, tap and hold an item on the Home screen, and then drag it to a new location. To move the item to another panel, drag it to the side of the screen. To remove an item, tap and hold the item. Then, drag it to Remove at the top of the screen.
Settings Sound Settings From the Home screen, tap > to enter the Settings screen. Then, choose Device > Sound. Drag the slider to adjust the Media volume, Alarm volume, or Ring volume. You can also adjust the Ring volume by pressing the Volume key on the right side of your phone. In the Sound Settings, tap Phone ringtone. Choose a desired ringtone for your phone.
Notifications and Quick Settings Panel Notifications alert you to the arrival of new messages, calendar events, and alarms. When a notification arrives, its icon appears at the top of the screen. Icons for pending notifications appear on the left, and system icons showing things like the Wi-Fi signal, mobile carrier signal, or battery strength are on the right. Swipe down from the top of your phone screen to open the notification panel and view details.
Location: Turn the location service on or off. Hotspot: Touch to turn your device’s hotspot on or off. Display brightness: Slide to lower or increase the brightness of your screen.
Data and Privacy Management USB file transfer With a USB cable, you can transfer pictures, music, and other data files between your REVVL PLUS and your computer. 1. Connect your phone to the computer’s USB port. Its USB storage drive will appear on the computer screen. 2. Transfer files between your phone and the computer. 3. When transfer is completed, eject the phone before unplugging the USB cable. Privacy Settings & Accounts From the Home screen, tap > to enter the Settings screen.
data service to continue the data connection. Please note that absence of Wi-Fi will use your data which could cost you an amount of money according to your tariff with your mobile operator. Operating the alarm From the Home screen, tap to the Alarm tab. > to enter the Clock screen. Then, tap to switch Tap and choose a time to set your alarm. Once your alarm is set, you may add a label to it. From here you may also control your alarm sound settings, including the alarm tone and vibration.
Battery screen, tap and then tap Battery saver, drag the slider to On. Battery saver turns off automatically when your phone is charging. Tap Show battery percentage, and the battery percentage will appear inside the battery level icon in the status bar. Wireless Settings Connecting to a Wi-Fi network 1. From the Home screen, tap > to enter the Settings screen. Then, choose Wireless & networks > Wi-Fi to turn Wi-Fi on/off. 2.
screen sleeps. Airplane Mode From the Home screen, tap > to enter the Settings screen. Then, choose Wireless & networks > More > Airplane mode. This mode is used to disable all radio communication in the device, Wi-Fi, BT, and Cellular. This mode allows the user to keep the device enabled and use other applications which do not require RF signals. Bluetooth Settings Bluetooth has the capacity to connect several mobile devices at once.
Pairing your Phone with a Bluetooth Device 1. From the Home screen, tap > to enter the Settings screen. Then, choose Wireless & networks > Bluetooth to turn Bluetooth on. 2. Your phone will begin searching for nearby Bluetooth devices. 3. If your phone stops scanning before your Bluetooth device is ready, tap Refresh. 4. Within the list, tap the ID of the Bluetooth device to pair with it. 5. Ensure that both devices show the same passkey and tap Pair.
conversations, play music in stereo, or transfer files or other data. You can select which profiles you want to use with your phone. You can also change the name of the Bluetooth device as it appears on your phone. 1. From the Home screen, tap > to enter the Settings screen. Then, choose Wireless & networks > Bluetooth to turn Bluetooth on. 2. From the Bluetooth settings screen, tap next to the connected Bluetooth device which you are configuring. 3.
Apps Phone Making a Call From the Home screen, tap at the bottom or tap > to enter the Phone screen. 1. Enter a phone number in the keypad to make a call. If the keypad does not appear on the screen, tap to open it. 2. Tap to enter the Contacts screen, and then choose someone to call from your contacts list. To choose someone to call, scroll, type a name or use the voice calling Google option. 3. To place a call, tap the contact’s name. 4. To view recent calls, tap Call History tab. 5.
There are various options available when a call comes in. To answer a call, slide towards To reject a call, slide To reject the call and send an SMS message to the caller, slide towards on the right. on the left. towards on the top. Exploring the Call Log The Call log contains your history of calls received, missed or made. It's an easy way to redial a number, return a call or add a number to your contacts. 1. Tap to enter Phone screen. 2. Tap Call History calls. tab.
You have the following options for Call History Once in Call History, tap to see the following options: 1. 2. 3. Search call log Clear Call log Tap a number or contact, and then tap Call details for more information about the call. 4. 5. Tap to delete the call from your call log. Tap Edit number before call, to make changes to the call back number. Contacts From the Home screen, tap at the bottom or tap > to enter Contacts screen.
Messaging From the Home screen, tap screen. at the bottom or tap > to enter the Messaging Creating a Message 1. From the Messaging screen, tap . 2. Enter the recipient's number or you can tap 3. Add your message. Tap slides. to select contacts. to attach media files such as an image, contacts and 4. Tap to send the message. Note: An SMS will be sent as an MMS when media files are added. Replying to a Message 1. From the Messaging screen, select the message you want to reply to. 2.
Email Getting Familiar with your Email App On the Home screen, tap > to enter the Email screen. When using it for the first time, you need to enter your email address and password to configure an account. Follow the on-screen instructions to configure your account. After your email account is configured, you can archive, delete, label, or perform other mail operations. Tap the icon on the left of a mail thread to select it.
Camera You can use the Camera app take pictures and record videos. Taking a Photo 1. From the Home screen, tap or tap > to enter the Camera screen. 2. Focus on your subject by looking through your phone screen. 3. Tap to take a photo. Or swipe to the left to activate the Pro mode and tap take a photo. Creating a Video 1. From the Home screen, tap or tap > 2. Swipe to the right to activate the Video mode. 3. Tap to start recording a video. 4. Tap to stop when you finish recording.
Sharing a Video or Photo 1. On the Home screen, tap > to enter the Photos screen. 2. Select a video or photo and tap . 3. From the pop-up screen, select your desired sharing method. Photos On the Home screen, tap > to enter the Photos screen. You can view and manage photos and videos stored in your phone. When you’re signed into your device with your Google Account, the Photos app makes it easy to auto-backup all the photos and videos you take, organize them, and share with friends.
Specs & hardware Specifications Dimensions Form Factor Antenna SIM card Network Mode Camera Earphone Jack Screen Parameters Type IPS 6.50 x 3.25 x 0.35 inches Bar, Touch screen Built-in Nano SIM GSM Quad, UMTS and LTE Rear camera: 13 MP+5 MP AF; Front camera: 8 MP FF 3.5mm earphone jack Screen Size 6 inches Resolution 1920x1080 Accessories Lithium Ion Rechargeable Battery Battery Type Battery Rated Capacity Nominal Voltage 3300 mAh 3.85 V Note: The battery capacity is subject to update and change.
In-box contents No. Name Quantity 1 Phone 1 2 Battery (built-in) 1 3 Travel Charger 1 4 USB Cable 1 5 Warranty Card 1 6 Quick Start Guide 1 Note: The items supplied with the phone and any available accessories may vary depending on the region or service provider.
Declaration of hazardous substances Toxic or hazardous substances or elements Parts Name Chrom ium VI (Cr(VI) ) Polybro minate d Biphen yls (PBB) Polybrominat ed Diphenyl Ethers (PBDE) Plumbum (Pb) Mercur y (Hg) Cadmi um (Cd) PCB Board and Accessories ○ ○ ○ ○ ○ ○ Plastics ○ ○ ○ ○ ○ ○ Metals ○ ○ ○ ○ ○ ○ Battery ○ ○ ○ ○ ○ ○ Other ○ ○ ○ ○ ○ ○ ○: indicates that the content of the toxic or hazardous substance in all homogeneous materials is within the limit of the SJ/T1
Health/Safety/Warranty Guide Important Health Information and Safety Precautions When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the product operating instructions. To reduce the risk of bodily injury, electric shock, fire and damage to the equipment, closely observe the all of the following precautions.
Electrical safety This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product. Handle battery packs carefully. This product contains a Li-ion battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack.
this standard: IEEE-Std-1725-200x. 8. Replace the battery only with another battery that has been qualified with the system per this standard: IEEE-Std-1725-200x. 9. Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface causing damage, take it to a service center for inspection. 10. If the battery leaks: Do not allow the leaking fluid to come in contact with eyes. If contact occurs, DO NOT rub the eyes.
storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Aircraft safety Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane is prohibited in most countries.
When in an area with a potentially explosive atmosphere or where flammable materials exist, the device should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Use only the supplied integral antenna. Use of unauthorized or modified antennas may impair call quality and damage the phone, causing loss of performance and SAR levels exceeding the recommended limits, as well as causing non-compliance with local and national regulatory requirements. In order to limit RF energy exposure and to ensure optimal phone performance, operate the device only it its normal-use position.
- Stop charging the cell if charging is not completed within the specified time. - Stop using the cell if abnormal heat, odor, discoloration, deformation or abnormal condition is detected during use, charge, or storage. - Keep away from cell immediately when leakage or foul odor is detected. - Wash well with clean water immediately if liquid leaks onto your skin or clothes. - If liquid leaking from the cell gets into your eyes, do not rub your eyes.
output power shall not exceed the following value: Input: AC100-240V~ 50/60Hz 0.35A Output: DC5V 2A 3. The Travel Charger shall be used for I.T. equipment only. 4. For indoor use only. 5. Cleaning – Unplug this from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean; use only a dry cloth. 6. Water and moisture – Do not use this product under moist environment. 7.
reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If you experience interference with reception (e.g.
TIA Safety Information The following is the complete TIA Safety Information for wireless handheld phones: Exposure to radio frequency signal Your wireless handheld portable phone is a low-power radio transmitter and receiver. When ON, it receives and sends out Radio Frequency (RF) signals. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones.
1. Give full attention to driving -- driving safely is your first responsibility; 2. Use hands-free operation, if available; 3. Pull off the road and park before making or answering a call if driving conditions or the law requires that you do so. Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker.
alternatives. Other medical devices If you use other personal medical devices, consult the device manufacturer to determine if it is adequately shielded from external RF energy, or your health care provider may be able to advice about any harmful device interactions. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.
objects into the battery. Do not immerse your equipment in water or other liquids, or expose it to water or other liquids, fire, explosions or other hazards. 3. Do not short-circuit the battery or allow metallic conductive objects to contact the battery terminals. 4. Avoid dropping the phone. If the phone is dropped on a hard surface or elsewhere, take it to a service center for inspection if damage is suspected. Charger and adapter safety 1. The charger and adapter are intended for indoor use only. 2.
7. Use of extended backlighting, Browser, and data connectivity kits affect battery life as well as talk/standby times. 8. The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on. Explosion, shock, and fire hazards 1.
4. Do not immerse your phone in water. If this happens, immediately turn the phone OFF and remove the battery. If the phone does not work, take it to an authorized Service Center. 5. Do not paint your phone. 6. Phone data, including contact information, ringtones, text messages, voice messages, pictures or videos, etc., may be inadvertently deleted due to careless use, phone repair, or software upgrades. Please back up your important phone numbers and all other vital data.
device, the device settings and the headphones. Hence, individual susceptibility to noise-induced hearing loss and other hearing problems can vary. Please follow these important guidelines for hearing loss prevention: 1. Set the phone’s volume in a quiet environment and select the lowest volume for which you can hear clearly. 2. When using headphones, turn the volume down if you cannot hear the people speaking near you or if the person sitting next to you can hear what you are listening to. 3.
National Institute on Deafness and Other Communication Disorders National Institutes of Health 31 Center Drive, MSC 2320 Bethesda, MD USA 20892-2320 Voice: (301) 496-7243 Email: nidcdinfo@nih.gov Internet: http://www.nidcd.nih.gov/health/hearing National Institute for Occupational Safety and Health Hubert H. Humphrey Bldg. 200 Independence Ave., SW Washington, DC 20201 Voice: 1-800-35-NIOSH (1-800-232-4636) Internet: http://www.cdc.gov/niosh/topics/noise/default.html FDA Consumer Update The U.S.
necessary for device function; and 3. Cooperate in providing users of wireless phones with complete and accurate information regarding possible effects of wireless phone use on human health and safety. The FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group: 1. National Institute for Occupational Safety and Health 2.
microwave ranges (which also emit very low levels of RF when they are in standby mode). While high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects results in no known adverse health effects. Many studies of low-level RF exposures have not uncovered any biological effects. Although some studies have suggested that some biological effects may occur, such findings have not been confirmed by additional research.
exposures. However, none of the studies can provide absolute findings about long-term exposures since the average period of phone use in these studies was approximately three years. 4. What kinds of phones are the subjects of this update? Here the term “wireless phone” refers to handheld wireless phones with built-in antennas, often called “cell”, “mobile”, or “PCS” phones.
Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to conduct research on wireless phone safety. The FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts with independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
standard for measuring the Radio Frequency (RF) energy exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, “Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques”, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users.
The FCC website (http://www.fcc.gov/cgb/cellular.html) gives directions for locating the FCC identification number on your phone, so you can find your phone’s RF exposure level in the online listing. 9. What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers.
your body or use a wireless phone connected to a remote antenna. Again, the scientific data does not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 11. What about wireless phone interference with medical equipment? Radio Frequency (RF) energy from wireless phones can interact with some electronic devices.
Program (http://www.fcc.gov/cgb/cellular.html) International Commission on Nonionizing Radiation Protection (http://www.icnirp.de) World Health Organization (WHO) International EMF Project (http://www.who.int/emf) Health Protection Agency (http://www.hpa.org.uk/) Consumer Information on SAR (Specific Absorption Rate) This Model Phone Meets the Government’s Requirements for Exposure to Radio Waves. Your wireless phone is a radio transmitter and receiver.
actual SAR level of the phone while operating can be well below the maximum value. Because the phone is designed to operate at multiple power levels to use only the power required to reach the network, generally, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure.
FCC ID: R38YL3701A. To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for your phone, follow the instructions on the website and it should provide values for typical or maximum SAR for that phone.
guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate this. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. When you're talking on a cell phone, it's recommended that you turn the BT (Bluetooth) mode off for HAC.
Standard Limited Warranty (This standard Limited Warranty supersedes and replaces for all purposes the Standard Limited Warranty that appears in the enclosed documentation, if any) COOLPAD TECHNOLOGIES, INC.
equipment not furnished or approved by COOLPAD; (g) defects or damage resulting from improper testing, operation, maintenance, installation, service, or adjustment not furnished or approved by COOLPAD; (h) defects or damage resulting from external causes such as collision with an object, fire, flooding, dirt, windstorm, lightning, earthquake, exposure to weather conditions, theft, blown fuse, or improper use of any electrical source; (i) defects or damage resulting from cellular signal reception or transmis
the sales receipt or comparable proof of sale showing the original date of purchase, the serial number of the Product and the seller's name and address. To obtain assistance on where to deliver the Product, please call COOLPAD Customer Care at 1-877-606-5753. If COOLPAD determines that any Product is not covered by this Limited Warranty, you must pay all parts, shipping, and labor charges for the repair or return of such Product.
affiliated entities. Severability If any portion of this Limited Warranty is held to be illegal or unenforceable, such partial illegality or unenforceability shall not affect the enforceability of the remainder of the Limited Warranty. Coolpad Technologies, Inc.