Thanks for purchasing viliv. Please read the precautions throughly before using the product.
Copyright Yukyung Technologies Corp. has the copyright for this guide. Contents of this manual may not be copied or produced in any form or means without prior authorization from Yukyung Technologies Corp. ©2010 Yukyung Technologies Corp. All rights reserved. Certification This device has acquired EMC certification for home use (Class B) and is designed not only for use in residential area but anywhere.
$POUFOUT Safety Precautions for Use ...............................................................4 Names of Parts ...................................................................................7 Basic Components ..........................................................................................................7 Accessories (Optional) ...................................................................................................7 Front View ...................................................
Safety Precautions for Use Warning Please observe the instructions below. Failure to do may cause heating, fire, explosion, etc. If the battery can be seen to be swollen, there may be imminent danger. Immediately contact the manufacturer or sales representative. Only use an eligible specified charger. Keep the device away from open flames. (Do not put it in a microwave.) Do not leave the device in a car in summer. Do not store or use the device in a hot and wet place like a bathroom.
Safety Precautions for Use The precautions below are provided to prevent bodily injury or property damage by using this product correctly. Please observe the precautions. Precautions on Power Do not touch the power adapter with wet hands. Plug the power cord into an outlet with grounded jack. Be sure the plug goes in all the way and is not loose. Do not use your device if it is damaged, including an exposed or peeled power cord.
Safety Precautions for Use The device functions vary depending on model. Read the relevant precautions for the provided function before using the device. Precautions for the Bluetooth Do not attempt to operate the Bluetooth while driving. Accidents caused by such improper handling are the sole responsibility of driver. To prevent electromagnetic problems or other dangers, turn off the Bluetooth setting wherever the use of Bluetooth is prohibited.
Names of Parts The appearance of the components below may differ from the actual components and some components are subject to change. Basic Components Main Body Battery Hand strap AC/DC Power Adapter USB-link Cable (Professional only) User’s Manual Accessories (Optional) D-SUB Cable (Professional only) AV-out Cable (Professional only) Notice Use only certified Viliv cable.
Names of Parts Front View WEBCAM Equipped with webcam. TFT LCD/Touch Screen Users can operate the device using the touch screen. Speaker Speaker is built in. Power Button/Power Lamp For turning the power on/off, and checking the status of power. Optical Joystick For moving the mouse pointer.
Names of Parts Keyboard The keyboard may be different for each country. In order to use the orange colored keys on the keyboard, press the keys and the Fn key together. Optical Joystick Key Use these keys for left or right mouse click. Esc Key It is usually used for terminating or interrupting programs. Function Keys (F1~F12) and Number Keys Usages are different depending on the operating system used and application program. Function keys and numbers from 0 to 9.
Names of Parts Left / Right View Multi I/O Port Used for external video output (component video, composite video, and S-video). (Professional only) USB HOST Port For connecting to external devices with USB port. 10 MicroSD Port This port is for using Micro SD memory device. Power Adapter Port For connecting power adapter or charging the battery. Antenna This antenna is for watching DMB. (Professional only) Battery Removal Button Press this button to remove the battery.
Names of Parts Lower Side Earphone Port For connecting earphone Built-in Microphone Internal microphone is built in. Hand Strap Loop Rear View The figure below shows the rear side of the main body without the battery. (Refer to Page 17~18 for Separating/Attaching battery.) Battery Charging Port Connection part of battery terminal.
Installation and Cable Connection Connecting Earphone Insert the earphone to the earphone port on the lower side of the handset.
Installation and Cable Connection Multi-IO Port AV-OUT, D-SUB (Optional) For connecting TV or monitor. (Professional only) D-SUB Yellow Composite (video) White Red Composite (audio) Blue Green Red Components Black S-VIDEO Notice Using excessive force during insertion may damage connectors or cables.
Installation and Cable Connection Multi I/O Port USB Link Connect the USB link cable to the multi-IO port on the left side of the handset. (Professional only) USB HOST Connection This is used for the connection of external devices, such as digital camera, external HDD, etc.
Installation and Cable Connection Power Connection (Charging Adaptor) The charger is connected to the power adapter terminal on the left side of the station.
Installation and Cable Connection Inserting · Extracting MicroSD Memory Card How to Insert : Align the front face of the MicroSD memory card toward the MicroSD memory slot and push it in until you hear a clicking sound. (Do not use excessive force as it could damage the MicroSD memory card) How to Extract : Press the tip of the MicroSD memory card gently and it will be removed automatically as it is a one-touch removal type.
Separating · Attaching Battery Separating Battery How to Remove the Battery Press the Battery Open button on the right side of the handset Push the button in the direction of the arrow. Hold the tip of the battery and lift it up. Notice Separate the charger after turning the power of the station off. If not, you may receive an electric shock by a short circuit in the battery power part.
Separating · Attaching Battery Attaching Battery How to Insert the Battery Push the battery in the direction of the arrow. Notice If the battery is misaligned with the groove and you attempt to mount the battery, the device may be damaged.
Basic Operation Turning the Power On/Off Turning the Power On Depress the power button for about two seconds to turn on the power. The LCD screen turns on and the main screen is displayed. Turning the Power Off Use the Shutdown menu in the Start Menu to turn off the device while Windows is running. If the system locks up while using the device, depress the power button on the left for a long duration while the device is on to turn the power off.
Basic Operation Set Up for viliv Manager viliv Manager is executed by double touching vilivManager on the screen. 1 Wireless LAN Power Activate the wireless LAN. 2 Bluetooth Power Activate the Bluetooth function. 1 3 Camera Power Activate the webcam. 2 4 Modem Power Activate the Modem function. 3 5 Optional Setting (Professional only) Speaker OFF: To turn on/off the internal speaker while using AV-OUT System Information To check the product information.
Recovery Solution (AMI Rescue) Guide As an image-based OS recovery solution, it recovers to the initial status of shipment from factory when HDD of user cannot be booted from OS or it has problems. Way to Use Recovery Solution (AMI Rescue) Execution of Recovery Solution (AMI Rescue) If viliv logo appears when booting the system (BIOS POST), press the F10 key 1-2 times. As the logo disappears, Pre-Boot Menu window appears.
Specifications The specifications below may be changed for enhancement of product performance without prior notice. General Specifications Product Name N5 CPU & Chipset Intel® AtomTM 1.33 (Z520) + SCH US15W LCD 4.8-type WSVGA (1024 x 600) / Touch Panel RAM 1GB Storage SSD 32GB LAN IEEE 802.11b/g WWLAN (Optional) WiMAX, HSDPA Bluetooth Bluetooth Ver2.
Memo English 23
Memo 24 English