User's Manual

TOP-4512AC-U USER MANUAL

INSTAL LING & REMOVING WiFi Module

1. Press the depression at the top of the robot vacuum cleaner.

The lid of the storage compartment will open.

2. Unlatch the dust box by lifting the handle upward

3. Remove the dust box

 Pull the cover out from the front.

 Insert or Remove the WiFi module.

 Put the cover back on.

Note

You can connect the robot vacuum cleaner directly to a mobile device without a WiFi network.

To do this, connect the mobile device to the robot vacuum cleaner’s WiFi.

Use the robot vacuum cleaner’s serial number as the WiFi password.

You can find the serial number on a sticker in the storage compartment and on the data plate on the underside

of the robot vacuum cleaner. Follow the instructions in the app.

PAGE 1
TOP-4512AC-U USER MANUAL INSTALLING & REMOVING WiFi Module 1. Press the depression at the top of the robot vacuum cleaner. The lid of the storage compartment will open. 2. Unlatch the dust box by lifting the handle upward 3. Remove the dust box  Pull the cover out from the front.  Insert or Remove the WiFi module.  Put the cover back on. Note You can connect the robot vacuum cleaner directly to a mobile device without a WiFi network.
PAGE 2
FCC Information to The User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.