YSOFT SAFEQ 6 DOCUMENTATION THE SETUP, SERVICE, AND FUNCTIONS OF THE YSOFT SAFEQ 6 Y SOFT SAFEQ 6 DOCUMENTATION WWW.YSOFT.
CONTENT 1 Introduction 3 1.1 Purpose of this document 3 1.2 Validity of this document 3 1.3 Goals and objectives 3 1.4 Terms and abbreviations 3 1.5 Prerequisite knowledge 3 1.6 Disclaimer 3 2 Overview 5 2.1 System overview 5 2.2 Hardware components 5 2.
1 INTRODUCTION 1.1 PURPOSE OF THIS DOCUMENT This document provides essential information on the installation and configuration of YSoft USB Card Reader version 3. 1.2 VALIDITY OF THIS DOCUMENT This document applies to YSoft USB Card Reader v3. 1.3 GOALS AND OBJECTIVES That YSoft USB Card Reader v3 can be connected simply to a multi-functional device and serve for user authentication using a card. The card must be assigned to a user in the YSoft SafeQ system.
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense. This device complies with Industry Canada’s licence-exempt RSSs.
2 OVERVIEW 2.1 SYSTEM OVERVIEW YSoft SafeQ® USB Card Reader has the following characteristics: • Connection and power supply of the card reader are via the USB host interface • Exchange of the card reader is possible without turning off the MFD (hot-plug) • Compatibility with some MFD additions 2.2 HARDWARE COMPONENTS 2.3 USB CARD READER SPECIFICATIONS Parameter Value Identification Using a card reader Voltage 5 V DC Maximum current input 0.
Parameter Value Storage temperature 0°C to +50°C Working air humidity 20% to 85% without condensation Storage air humidity 8% to 85% without condensation Resistance to magnetic field no added resistance Transmitting frequency 125 kHz, 132 kHz, 134.2 kHz, 13.
3 USAGE Please use the card by placing it on the edge of the reader as indicated below.
4 LED INDICATOR LED color meaning LED off The USB device has not been initialized yet or the device is in sleep mode. Orange Initializing Green Card reader initialized. Ready to read a card.
5 MOUNTING INSTRUCTIONS Please mount the card reader to an MFD using the mounting kit. Keep unprotected cords out of the path of foot traffic to prevent tripping. Do not leave cords dangling anywhere where they can be pulled down and tripped over.
Y SOFT SAFEQ ENTERPRISE WORKFLOW PLATFORM 10
6 CONFIGURATION For configuration, see USB Reader tool for Reader configuration. Risk Description Control Measures (details of all existing controls) Risk Analysis Additional Measures (details of all additional checks P Risk Rating Small Possible L (C4) Correct mounting is indicated in the manual. A recommendation on cable placement is indicated in the manual. Falling of object/ component A mounting kit is supplied with the device.
Risk Description Control Measures (details of all existing controls) Exposure to nonionizing radiation (radiofrequency) The device produces radiofrequency radiation below limits indicated by relevant norms. Risk Analysis Additional Measures (details of all additional checks O P Risk Rating Small Improb. L (D4) to be carried out) The norms the device meets are listed in the manual: EN 55032:15 EN 55024:10 ETSI EN 301489-3 V1.6.1:13 ETSI EN 301489-1 V1.9.2:11 ETSI EN 301489-1 V2.2.
FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.