Installation Instructions

ManualsBrandsYQT1213 ManualsWearable TechnologyChildrens positioning watch

YQT1213

Children's positioning watch

Q11 instruction

Please read the instructions carefully before using, so as to install correctly and use quickly. The color of the

product should be subject to the material object.

1. Preparation before use

Check whether the equipment model is correct and the accessories are complete;

Select the SIM card of GSM network and refer to the dealer's opinion.

The SIM card of the watch needs to open GPRS function and caller id display function.

When the watch is inserted into the SIM card, the gap is facing inward and the chip is facing upward (please

shut down before installing the card).

Install the APP client on the mobile phone, and the client can ask your dealer for details.

Barcodes or qr codes are used to register users.

 2.the product function

 Gps + base station positioning

 mobile client or computer GPRS service platform, the dual control mode

 GPRS real-time positioning, tracking and monitoring

 the phone book

 intercom

 Hand clock

 Safe area

 SOS emergency alarm

 Low power alarm

 Weather forecast

 Remote shutdown

 lighting

 game

 take photos

 telephoto

Summary of content (9 pages)

PAGE 1
YQT1213 Children's positioning watch Q11 instruction Please read the instructions carefully before using, so as to install correctly and use quickly. The color of the product should be subject to the material object. 1. Preparation before use Check whether the equipment model is correct and the accessories are complete; Select the SIM card of GSM network and refer to the dealer's opinion. The SIM card of the watch needs to open GPRS function and caller id display function.
PAGE 2
 The watch is introduced Sim Card slot camera floodligh The power button sos Microphones hole Description of some buttons: This picture is for reference only. The customer needs to make relevant adjustments according to the watch Start button: long press start button. SOS key: the APP sets the SOS number, and long press SOS to dial. 3.
PAGE 3
4.Client operation instructions Warm tips: Children's positioning watch needs to be bound to the APP of the client side, and after registering the account, it can realize the functions of interphone communication, voice interphone, positioning and voice monitoring between the watch and mobile phone, and play a monitoring role for children! 4.1 the APP to register Before login, you need to register your account manually. Click the registration icon and follow the prompt to register your account.
PAGE 4
. 4.3 Add the devices in the main administrator account to the auxiliary administrator account The device is bound after the secondary administrator registers the account. If the device is bound, that is, there is a master administrator already, then the secondary administrator will receive the notification of application authorization when binding. The primary administrator will also receive the notification of request authorization.
PAGE 5
Description of some functions: （1）Listening micro-chat: realizing the voice dialogue between watch and app. App sends voice: after starting recording, the App starts recording and sends it to the watch, with the longest voice for 15 seconds. Press the button on the watch end to play the recording. （2）Shuffle map: check the position of the watch in real time. The map interface can display the position of the watch and app phone. Click "location" to start real-time positioning for 3 minutes.
PAGE 6
for 3 seconds in case of emergency. When no one answers, the loop calls two rounds. In general, it is set as the number of parents. After opening the listening device, the watch will dial the number set. ② The watch cannot hear the voice of the mobile phone, and the mobile phone can listen to the watch. ③ Bilingual phone book: the watch can set up 10 phone book Numbers, which can be dialed with the watch to make two-way calls.
PAGE 7
the watch, and the watch cannot connect to the app. Change password: the login password of the account can be changed. 5.3 watch alarm instructions After various alarms of the watch, the client will receive the alarm push. The mobile client will click the alarm and enter the main interface of the app. 6. Description of working mode of the watch There are three basic working modes: normal mode, power saving mode, real-time positioning mode, and upload intervals of different working modes.
PAGE 8
the watch is consistent with the ID written by the watch from the factory. The customer can edit the message pw,123456 and ts# by himself with the phone and send it to the watch (the watch must be installed and started up, and the message must be input in English input method). 4) there are two cases when the registration cannot be completed: a. If the device number is not present or the device number is registered, it must be handled by the agent; B.
PAGE 9
FCC caution This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.