YoLink X3 Temperature Humidity Sensor YS8006-UC Installation Manual & User Guide Rev 1.
TABLE OF CONTENTS SECTION TOPIC PAGE A Welcome! 1 B Introduction 2 C What's in the Box? 3 D Install the YoLink App 4 E Add Your X3 T/H Sensor to the App 6 F Installation 8 G Get to Know Your X3 T/H Sensor 9 H Sensor Refresh Frequency 10 I App Functions: Device Screen 11 I App Functions: Device Details Screen 12 I App Functions: Alert Settings Screen 13 I App Functions: Chart Screen 14 I App Functions: Alarm Strategies Screen 15 I App Functions: Automation 16 J T
User Guide Conventions To assure your satisfaction with your purchase, please read this user guide we have prepared just for you.
B Introduction YoLink X3 Temperature Humidity Sensor is a thermometer and hygrometer. With monitoring the real-time temperature and humidity levels in your home, it can provide you with an early warning if temperature or humidity is out of the comfortable range, the sensor will blink red once, and notifications will be sent to you.
C What’s in the Box? X3 Temperature Humidity Sensor Quick Start Guide 3
D Install the YoLink App 1 If you are new to YoLink, please install the app on your phone or tablet, if you have not already. Otherwise, please proceed to part E. Scan the appropriate QR code below or find the “YoLink app” on the appropriate app store. Apple phone/tablet iOS 9.0 or higher Android phone/tablet 4.4 or higher Open the app and tap Sign up for an account. You will be required to provide a username and a password.
D Install the YoLink App, Continued 2 You will immediately receive an email from no-reply@yosmart.com with some helpful information. Please mark the yosmart.com domain as safe, to ensure you receive important messages in the future. 3 Log in to the app using your new username and password. The app opens to the Favorite screen, as shown. This is where your favorite devices will be shown. You can organize your devices by room, in the Rooms screen, later.
E XXX Add Your X3 T/H Sensor to the App 5 Approve access to the camera, if requested. A viewfinder will be shown on the app. 6 Hold the phone over the QR code (on the rear of the X3 T/H Sensor) so that the code appears in the viewfinder. If successful, the Add Device screen will be displayed 7 Refer to Figure 1 on the next page. You can edit the name of the X3 T/H Sensor, and assign it to a room, if desired. Tap the Favorite heart icon to add this device to your Favorites screen.
E Add Your X3 T/H Sensor to the App, Cont. 8 If successful, close the Device Bound pop-up message by tapping Close 9 Tap Done as shown in Figure 2. Figure 1 Figure 2 If this is your first YoLink system, please visit our product support area at yosmart.com for an introduction to the app, and for tutorials, videos, and other support resources. 10 Ensure your YoLink Hub or SpeakerHub is setup and online before proceeding to the next step.
F Installation Press the SET button once to turn on the device. Place where wish to monitor the temperature or humidity 1. Ensure your device is placed on a stable surface or mounted securely on a wall or other surface. 2. Please refer to device environmental operating range information on part L. Use this device outside the recommend ranges at your own risk.
G Get to Know Your X3 TH Sensor Please take a moment to familiarize yourself with your X3 Temperature Humidity Sensor, in particular the LED behaviors and SET button functions.
HD Sensor Refresh Frequency Both temperature and humidity values refresh when one of the following conditions are met: 10
ID App Functions: Device Screen 11
ID App Functions: Device Details Screen 12
ID App Functions: Alert Settings Screen 13
ID App Functions: Chart Screen 14
ID App Functions: Alarm Strategies Screen You can set up notifications in alarm strategy settings, make sure you have enabled App, Email, SMS notification from the app->Menu->Settings->Account Settings>Advanced Settings, and verified your email address and added your phone number in the app.
ID App Functions: Automation The X3 Temperature Humidity Sensor can be set up as if condition in automation. For example, you can automatically turn on the fan, if the sensor detects a high temp. This example is shown below. The automation also sends a custom notification (via app push notification, email, SMS, or SpeakerHub broadcast) reminding the sensor detects the high/low temperature/humidity.
J Third-party Assistants & Integrations The YoLink X3 Temperature Humidity Sensor works with several voice assistants, including Alexa and Google, and it works with other automation platforms such as IFTTT. To set up voice assistant integrations, in the app, go to Settings, Third-party Services, and follow the instructions. Please note, only IFTTT supports X3 Temperature Humidity Sensor as trigger action in the routine.
K Firmware Updates Your YoLink products are constantly being improved, with new features added. It is periodically necessary to make changes to your device's firmware. For optimal performance of your system, and to give you access to all available features for your devices, these firmware updates should be installed when they become available. In the Detail screen of each device, at the bottom, you will see the Firmware section, as shown in the image below.
M Specifications 19
N Warnings Please install, operate and maintain the X3 Temperature Humidity Sensor only as outlined in this manual. Improper use may damage the unit and/or void the warranty Use only new, name brand, lithium non-rechargeable AA batteries Do not use rechargeable batteries Do not use zinc blend batteries Do not mix new and old batteries Do not puncture or damage batteries.
O 2-Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 2 years from the date of purchase. User must provide a copy of original purchase receipt. This warranty does not cover abuse or misused products or products used in commercial applications.
P FCC Statement 🏃♂️ This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Q Contact Us / Customer Support We are here for you, if you ever need any assistance installing, setting up or using a YoLink app or product! Please email us 24/7 at service@yosmart.com You can use our online chat service by visiting our website, www.yosmart.com or by scanning the QR code You can also find additional support and ways to contact us at: www.yosmart.