User Guide YS7903-UC Water Leak Sensor
Contents Introduction·····················································1 Features················································· ····· ·· · 2 Product Requirements········································2 What’s In The Box···············································2 Set Up Water Leak Sensor·····································4 Sensor Placement·············································8 Using YoLink App with Water Leak Sensor················9 YoLink Control········································
Introduction Water Leak Sensor is widely used in water leak detection. There will have an alert when any of the three sets of probes were under the water. Download YoLink App, add Water Leak Sensor to your smart home system, which will able to monitor your home's security in real time.
LED lights can show the current status of device. See the explanation below: FEATURE LIGHT BLINKING GREEN Connecting to cloud. FAST BLINKING GREEN Set up connection with devices. SLOW BLINKING GREEN Updating. FAST BLINKING RED Remove connection with devices. BLINKING RED AND GREEN ALTERNATELY Factory resetting. ALERT LIGHT BLINKING RED (EVERY 5 SECOND) Water Leak Warning. BLINKING RED (EVERY 30 SECOND) Low Power Alert.
Features Real-time Status - Monitor the real-time state of water leak sensor via YoLink App. Battery Status - Update battery level and send low battery alert. YoLink Control - Trigger an action of certain YoLink devices without internet. Automation - Set up rules for “If this then that” function. Product Requirements A YoLink Hub. A smartphone or tablet running iOS 9 or higher; Android 4.4 or higher.
Set Up Water Leak Sensor Follow the steps below to set up your Water Leak Sensor via YoLink App. Step 1: Set up YoLink App Get the YoLink App from the Apple App Store or Google Play.
Step 2: Log in or sign up with YoLink account Open the App. Use your YoLink account to log in. If you don’t have a YoLink account, tap Sign up for an account and follow the steps to sign up an account.
Step 3: Add device to YoLink App Tap the “ ” in YoLink App. Scan the QR Code on the device. You can customize the name, set the room, add to/remove from favourite. a. Name - Name Water Leak Sensor. b. Room - Choose a room for Water Leak Sensor. c. Favourite - Click “ ” icon to add/remove from Favourite. Tap the “Bind Device” to add the device to your YoLink account.
Step 4: Connect to the cloud Press the SET button once and your device will connect to the cloud automatically. Place the device to whenever you want to monitor. Note Make sure you hub is connected to internet.
Sensor Placement Located the water leak sensor in a location that may experience a water leak.
Using YoLink App with Water Leak Sensor Device Alert Any of a set of probes are touched by water at the same time, an alert will send to your YoLink account. Note Interval between two alerts is default to be 5 minutes.
Details You can customize the name, set the room, set the alert interval, enable/disable alert, add to/remove from favourite, check device history. a. Name - Name Water Leak Sensor. b. Room - Choose a room for Water Leak Sensor. c. Favourite - Click “ Favourite. ” icon to add/remove from d. Alert - Click enable/disable alert. e. Alert Interval - Set a time between two alerts after water leaking. f. History - Check the history log for the Water Leak Sensor. g.
Automation Automation allows you to set up “If this then that” rules so the devices could act automatically. Tap “Smart” to switch to Smart screen and tap “Automation”. Tap “ ” to create an automation. To s e t a n A u t o m a t i o n , y o u w i l l n e e d t o s e t a trigger time, local weather condition, or choose a device with certain stage as a triggered condition. Then set one or more devices, scenes to be executed.
YoLink Control YoLink Control is our unique “device to device” control technology. Under YoLink Control, the devices could be controlled without internet or Hub. Device which send out command is called controller(Master). Device which receive command and act accordingly is called responder(Receiver). You will need to set it up physically. Pairing Find a water leak sensor as controller(Master). Hold the set button for 5-10 seconds, the feature light will flash green quickly.
Un-pairing Find the controller(Master) water leak sensor. Hold the set button for 10-15 seconds, the feature light will flash red quickly. Find the responder(Receiver) action device. Hold the power/set button for 10-15 seconds, the device will enter the un-pairing mode. The above two devices will unpair by themselves and the feature light stops flashing. After unbundling, when there is a water leak, the responder will no longer turn off.
YoLink Control Diagram WATER LEAK WARNING TURN ON TURN OFF PAIRED WATER LEAK WARNING TURN ON TURN ON UNPAIRED 14
Maintaining the Water Leak Sensor Firmware Update Ensure our customer have the best user experience. Highly recommend you could update our newest version firmware. Tap the “Water Lwak Sensor” in App to go to its controls. Tap the “ details. ” icon at the top-right corner to go to Tap “Firmware”. The feature light will be slowly blinking green during the update and stop blinking when the update done.
Factory Reset Factory reset will erase all your settings and bring it back to default. After the factory reset, your device will still in your Yolink account. Hold the set button for 20-25 seconds until the feature light blinks red and green alternately. Factory reset will be done when the feature light stops flashing.
Specifications Voltage: 3V DC (2 - AAA battery) Environment: Working Temperature: 0°C~50°C (32°F~122°F) Working Humidity: ≤100%RH non-condensing 17
Troubleshooting Problem No alert or light. Possible Reason Solution Water leak sensor is battery died. Please replace the battery. Hub is offline. Please reconnect your hub to the Internet and press the set button of water leak sensor once. Hub is powered off. Please power on the hub again and press the set button of Water Leak Sensor once. Water leak sensor is battery died. Please replace the battery. Device malfunction Please contact customer service. LED blinking, no alert.
If you are unable to get your water leak sensor working Please contact Our Customer Service during business hours US Live Tech Support: 1-844-292-1947 M-F 9am - 5pm PST Email: support@YoSmart.com YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 WARRANTY 2 Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 2 year from the date of purchase.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.