User Guide YS7804-UC Motion Sensor
Contents Introduction················································1 Features··················································· · 2 Product Requirements···································2 What’s In The Box··········································2 Set Up Motion Sensor·····································3 Installation··················································7 Using YoLink App with Motion Sensor···············10 YoLink Control············································12 Maintaining the Motion
Introduction Motion Sensor is widely used in moving human body detection. Download YoLink App, add Motion Sensor to your smart home system, which will able to monitor your home's security in real time. LED lights can show the current status of device. See the explanation below: Red Once Alert. Blinking Green Connecting to cloud. Fast Blinking Green DETECTION WINDOW Set up connection with devices. Slow Blinking Green Updating. Fast Blinking Red Remove connection with devices.
Features Real-time Status - Monitor the real-time state of movement via YoLink App. Battery Status - Update battery level and send low battery alert. YoLink Control - Trigger an action of certain YoLink devices without internet. Automation - Set up rules for “If this then that” function. Product Requirements A YoLink Hub. A smartphone or tablet running iOS 9 or higher; Android 4.4 or higher.
Set Up Motion Sensor Follow the steps below to set up your Motion Sensor via YoLink App. Step 1: Set up YoLink App Get the YoLink App from the Apple App Store or Google Play.
Step 2: Log in or sign up with YoLink account Open the App. Use your YoLink account to log in. If you don’t have a YoLink account, tap Sign up for an account and follow the steps to sign up an account.
Step 3: Add device to YoLink App Tap the “ ” in YoLink App. Scan the QR Code on the device. You can customize the name, set the room, add to/remove from favourite. a. Name - Name Motion Sensor. b. Room - Choose a room for Motion Sensor. c. Favourite - Click “ ” icon to add/remove from Favourite. Tap the “Bind Device” to add the device to your YoLink account.
Step 4: Connect to the cloud Press the SET button once and your device will connect to the cloud automatically. Note Make sure you hub is connected to internet.
Installation Recommended Installation CEILING Installation Height: 3-4m Diameter: 6-8m 7
Ceiling and Wall Installation Please use the screws to stick the plate to wherever you want to monitor. Please connect the sensor to the plate. Note Please add motion sensor to YoLink App before you install it.
Using YoLink App with Motion Sensor Device Alert A movement is detected, an alert will send to your YoLink account. Note Interval between two alert will be 1 minute. Device will not alert twice if movement is under continuously detection in 30 minutes.
Using YoLink App with Motion Sensor Details You can customize the name, set the room, add to/remove from favourite, check device history. a. Name - Name Motion Sensor. b. Room - Choose a room for Motion Sensor. c. Favourite - Click “ Favourite. ” icon to add/remove from d. History - Check the history log for the Motion Sensor. f. Delete – The device will be remove from your account. a b c d Tap the “Motion Sensor” in App to go to its controls. e Tap the “ details.
Automation Automation allows you to set up “If This Then That” rules so the devices could act automatically. Tap “Smart” to switch to Smart screen and tap “Automation”. Tap “ ” to create an automation. To set an Automation, you will need to set a trigger time, local weather condition, or choose a device with certain stage as a triggered condition. Then set one or more devices, scenes to be executed.
YoLink Control YoLink Control is our unique “device to device” control technology. Under YoLink Control, the devices could be controlled without internet or Hub. Device which send out command is called controller(Master). Device which receive command and act accordingly is called responder(Receiver). You will need to set it up physically. Pairing Find a motion sensor as controller(Master). Hold the set button for 5-10 seconds, the light will flash green quickly.
Un-pairing Find the controller(Master) motion sensor. Hold the set button for 10-15 seconds, the light will flash red quickly. Find the responder(Receiver) action device. Hold the power/set button for 10-15 seconds, the device will enter the un-pairing mode. The above two devices will unpair by themselves and the light stops flashing. After unbundling, when the motion is detected, the responder will no longer turn on.
YoLink Control Diagram ALERT TURN OFF TURN ON PAIRED ALERT TURN OFF TURN OFF UNPAIRED 14
Maintaining the Motion Sensor Firmware Update Ensure our customer have the best user experience. Highly recommend you could update our newest version firmware. Tap the “Motion Sensor” in App to go to its controls. Tap the “ details. ” icon at the top-right corner to go to Tap “Firmware”. The light will be slowly blinking green during the update and stop blinking when the update done. Note Only the Motion Sensor that is currently reachable and has an available update will be shown on the Details screen.
Factory Reset Factory reset will erase all your settings and bring it back to default. After the factory reset, your device will still in your Yolink account. Hold the set button for 20-25 seconds until the LED blinks red and green alternately. Factory reset will be done when the light stops flashing.
Specifications Voltage: 3V DC (1-CR123A battery) Detection Angle: 360° (Ceiling), 120° (Wall) Installation Height: 3m (Ceiling), 1.
Troubleshooting Problem Possible Reason Solution Detection not work. Temperature is too low or too high. The most suitable temperature will be 2 5℃(77°F). No alert or light. Motion sensor is battery died. Please replace the battery. Hub is offline. Please reconnect your hub to the Internet and press the set button of Motion Sensor once. Hub is powered off. Please power on the hub again and press the set button of Motion Sensor once. Motion sensor is battery died. Please replace the battery.
If you are unable to get your motion sensor working Please contact Our Customer Service during business hours US Live Tech Support: 1-844-292-1947 M-F 9am - 5pm PST Email: support@YoSmart.com YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 WARRANTY 2 Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 2 year from the date of purchase.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.