User Guide YS7103-UC SET Siren Alarm
Contents What’s In The Box······································ ················· 1 Introduction············································· ················· 2 Features··································································4 Product Required·······················································4 Set Up Siren Alarm ···························· ··· ···· ·· ·· ··················5 Using YoLink App with Siren Alarm·········· ··· ························9 YoLink Control ··········· ················
What’s In The Box SET Siren Alarm * 1 AC/DC Adapter * 1 USB Cable * 1 Quick Start Guide * 1 1
Introduction YoLink Siren Alarm is primarily used for YoLink device-assisted alerts based on YoLink Control settings or automation settings. It can also alarm itself through button control on the device or through the YoLink App. When an alarm occurs, the device emits a loud sound and a red light. If the alert is caused by a relative device, not on its own, you can tell from its history logs on YoLink APP which device triggers a warning. Support USB power or battery power.
LED lights and beeping sound can show the current status of device. See the explanation below: BLINKING GREEN Connecting to cloud. FAST BLINKING GREEN Set up connection with devices. SLOW BLINKING GREEN Updating. SET FAST BLINKING RED Remove connection with devices. ALARM LIGHT BLINKING RED AND GREEN ALTERNATELY Factory resetting. BLINKING RED Warning. BLINKING RED (EVERY 30s) SET BUTTON Battery is low, please replace the battery. BEEPING SOUND WHOA ONCE Turn on the device.
Features Control from anywhere - Control and monitor your Siren Alarm remotely via YoLink App on your iOS or Android device. Three levels of alarm sounds - Set the alarm sound according to your needs. Battery Level - Monitoring the current battery level and send a low battery notification only when the device is battery-powered and the battery is low. Automation - Set up rules for “if this then do that” function via YoLink App.
Set Up Siren Alarm Follow the steps below to set up your Siren Alarm via YoLink App. Step 1: Set up YoLink App Download the YoLink App from the Apple App Store or Google Play.
Step 2: Log in or sign up with YoLink account Open the App. Use your YoLink account to log in. If you don’t have a YoLink account, tap Sign up for an account and follow the steps to sign up for an account.
Step 3: Add device to YoLink App Tap the “ ” in YoLink App. Scan the QR Code on the device. You can customize the name, set the room, add to/remove from favourite. a. Name - Name Siren Alarm. b. Room - Choose a room for Siren Alarm. c. Favourite - Click “ ” icon to add to/remove from Favourite. Tap the “Bind Device” to add the device to your YoLink account.
Step 4: Set up connection Turn on the Siren Alarm, set the toggle button to H(high), M(medium), L(low) level, and the device will be ready to use. Note YoLink Hub is required to set up Siren Alarm. Please set up your YoLink Hub first.
Using YoLink App with Siren Alarm Alarm and Disable Alarm Display the current state of the Siren Alarm, click to enable or disable the alarm. Note Only devices that are set up connection with Siren Alarm will trigger alarm of Siren Alarm. You will need to set up YoLink control or automation first. If the alert is caused by a relative device, not on its own, you can tell from its history logs on YoLink App which device triggers a warning.
How does the Siren Alarm alarm with sound and light? When a movement is detected. When there is a water leak warning. When the door is opened. When the door is closed. Press once the SET button on the Siren Alarm. Press the relative ON button on the YoLink Remote. How to disable the sound and light alarm? Press the SET button on the Siren Alarm. Click Disable button in YoLink App. Press the relative OFF button on the YoLink Remote.
Alarm Disable Alarm History 11
Details You can customize the name, set the room, Set alert time, add to/remove from favourite, check device history. a. Name - Name Siren Alarm. b. Room - Choose a room for Siren Alarm. c. Favourite - Click “ ” icon to add to/remove from Favourite. d. History - Check the history log for the Siren Alarm. e. Alarm Duration - Set the duration once an alarm occurs. f. Delete - Current device will be remove from your account. Tap the “Siren Alarm” in App to go to its controls.
a b c d e f 13
Automation Automation allows you to set up “if this then do that” rules so the devices could act automatically. Tap “Smart” to switch to Smart screen and tap “Automation”. Tap “ ” to create an automation. To set an Automation, you will need to set a trigger time, local weather condition, or choose a device with certain stage as a triggered condition. Then set one or more devices, scenes to be executed.
YoLink Control YoLink Control is our unique “device to device” control technology. Under YoLink Control, the devices can be controlled without internet or Hub. Device which send out command is called the controller(Master). Device which receive command and act accordingly is called the responder(Receiver). When the controller acts the same action as the pairing status, the responder acts the same action as the pairing status as well.
Controller List YS7704-UC Door Sensor YS7705-UC Garage Door Sensor YS7804-UC Motion Sensor YS7903-UC Water Leak Sensor YS3603-UC YoLink Remote YS7706-UC Garage Door Sensor 2 Continuously updating 16
Pairing C h o o s e a Yo L i n k d e v i c e a s t h e c o n t r o l l e r ( M a s t e r ) . H o l d t h e p o w e r / s e t b u t t o n f o r 5-10 seconds, the device will enter the pairing mode. Choose a Siren Alarm as the responder (Receiver). Hold the SET button for 5-10 s e c o n d s , t h e l i g h t w i l l fl a s h g r e e n q u i c k l y. After pairing succeed, the light will stop flashing. When the controller alerts, the Siren Alarm will alarm with sound and light as well.
Trigger an alarm when the controller alert.
Un-pairing F i n d t h e c o n t r o l l e r ( M a s t e r ) Yo L i n k d e v i c e . H o l d t h e p o w e r / s e t b u t t o n f o r 1 0 - 1 5 seconds, the device will enter the un-pairing mode. Find the responder(Receiver) Siren Alarm. Hold the power/set button for 10-15 s e c o n d s , t h e l i g h t w i l l fl a s h r e d q u i c k l y. After unbundling, the light stops flashing. When the controller alerts, the Siren Alarm will no longer alarm with sound and light.
Disable connection with the controller device.
Maintaining the Siren Alarm Firmware Update To ensure the best user experience, we strongly recommend that you can update to our latest version of the firmware. Tap the “Siren Alarm” in App to go to its controls. Tap the “ details. ” icon at the top-right corner to go to Tap “Firmware”. The light will be slowly blinking green during the update and stop blinking when the update done. Note Only the Siren Alarm that is currently reachable and has an available update will be shown on the Details screen.
Factory Reset Factory Reset will clear all settings and restore them to the default settings. After the factory reset, your Siren Alarm will remain in your YoLink account. Hold the set button of your Siren Alarm for 20-25 seconds until the LED blinks red a n d g r e e n a l t e r n a t e l y. Factory reset will be done when the light stops flashing.
Install/Replace the Batteries Please remove the battery cover. Install TWO new AA-batteries and close the battery cover. Note Provide battery backup power to keep your devices powered for dozens of hours. Please replace the battery when the battery level gets low. We recommend that you use the power adapter provided to power on your devices. Do not mix a new battery with an old one.
Specifications Voltage: DC 5V/1A (Micro USB) / DC 3V (2-AA Battery) Alarm Volume: H(high): 110db M(medium): 104db L(low): 100db Environment: Temperature: 0°C~50°C (32°F~122°F) Humidity: 0%~95% non-condensing 24
Troubleshooting Problem Remote/Automation control failed. Other problems. Possible Reason Solution The mobile signal is weak. Please check after the phone signal is restored. Hub is offline. Please follow the “User Guide of YS1603-UC YoLink Hub” for troubleshooting. Siren Alarm does not power on. Please power on the Siren Alarm. The toggle button is switched to Off. Switch the toggle button to H(high), M(medium) or L(low). Out of communication range with hub.
Warning Please use the power adapter provided. Please do not connect the product to the high voltage. Do not install the device near places where people frequently pass by to avoid noise and damage to hearing. Keep away from high temperature or fire. K e e p a w a y f r o m d u s t y, w e t o r d i r t y. The Siren Alarm is not waterproof, please avoid rain, wind and sun. Please do not use strong chemicals or cleaning agents to clean the Siren Alarm.
If you are unable to get your Siren Alarm working Please contact Our Customer Service during business hours US Live Tech Support: 1-949-825-5958 M-F 9am - 5pm PST Email: service@YoSmart.com YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 WARRANTY 1 Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 1 year from the date of purchase.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.