€} To configure a X3 Valve Controller as the responded, close the valve using SET button or via Yo link app (verify the valve is shown to be Closed on 1 pp). Press and hold the SET button for 5-10 seconds until the LED quickly blinks green, then, release the button b. Press to ¢.
Operation Water Leak Sensor ® When the Water Leak Sensor detects water, the Yo link X3 valve Controller will now immediately close the valve. The valve will remain closed until opened via the app or using the SET button; the rest oral of the Water Leak Sensor to normal {no water detected) does not open the valve } # More advanced sequences, — controlling multiple outputs {e.g.closevalve and activate siren) are available via the Bobolink Water detected {Water depth »0.
F-2.
G. Maintenance G-1. Firmware Update To ensure our customers have the best user experience, we highly recommend you update to the newest version firmware when an update is available e In “Firmware”, if a new version is listed as available {#48# ready now), click it to start the firmware update process # You may use your device during the update as it is performed in the background.
G-2.
G-3. Replacing the X3 Valve Controller Battery Open the enclosure by removing the four enclosure screws Disconnect the battery cable and remove the old battery Connect the new battery to the Valve Controller battery cable Press the battery count reset button after replacing the battery Verify the device is online in the app Reinstall the enclosure cover, using the four enclosure screws.
H. Specifications H-1. X3 Valve Controller Battery: ER34615, lithium, 3.8Y, 13000mAh non-rechargeable Output Voltage: 12vDC Device Current Draw: £ 160mA (on, without connecting with the manipulator/motorized valve}, s Skua (standby) iP Rating: IP&5 {fully dust tight and Is completely protected against solid objects. iris also protected against water jets projected by a nozzle (6.
H-2. Gas/Water Valve Manipulator Working Voltage: Valve Type: Ball Valve Valve Pressure: 80-106 KPa Torque: 40kgf.
H-3. Motorized Valve Working Voltage: 12V DC Working Current: Max 500mA (while valve is opening or closing) Valve Type: Ball valve Suitable Media: Water, air Max Working Pressure: 145P51 (1.0Mpa) Max. Torque Force For Actuator: ZN.m iP Rating: {P67 (waterproof) Open/Closed Time: 5-10 seconds {max 15 seconds) Thread: NPT indicator: Visual Position Indicator Cable Length: 1.64 feet {0.
Troubleshooting Symptom: 1.
Warning ® Please install, operate and maintain the X3 Valve Controller and Manipulator {or Motorized Valve or Bulldog Valve Robot) only as outlined in this manual. Improper usemaydamagetheunitand/orvoidthe warranty.
Power the controller only with one ER34615 battery {see below, regarding batteries}. Use only new, name brand, lithium batteries. Do not use rechargeable batteries, Do not use zine blend batteries. Do not puncture or damage batteries. Leakage can cause harm on skin contact, and is toxic if ingested. Do not dispose of batteries in fire as they may explode] Please follow local battery disposal procedures.
if you have any difficulties installing or using Yo link products, please contact our Customer Service department during business hours: US Live Tech Support: 1-845-825-5958 M-F 9am 5pm PST Email: Martinet. 15375 Charabanc Parkway, Ste G-105 Irvine, CA 52618, USA Warrant tiny 1 Year Limited Electrical Warranty Yo Smart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 1 year from the date of purchase.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.