User Guide YoLink Finger YS4908-UC SET DOWN UP
Contents WARNING············································· ······················· 1 Product Required·····························································1 Introduction············································· ·············· ····· ·· 2 Features······································································3 Set Up YoLink Finger························································4 Installation··························· ··································· · · ·· ·· 8 Using YoLink Ap
WARNING To prevent severe injury to persons, Do not let the children use YoLink Finger without adult supervision. Always wait until the garage door or gate to be completely closed. Product Required A YoLink Hub. A Garage Door Opener. The smartphone or tablet able to run iOS 9.0 or higher; Android 4.4 or higher. To gain full access, we suggest you to bind your YoLink Finger with a garage door sensor (Both YS7705-UC and YS7706-UC are suitable).
Introduction YoLink Finger is used for garage door switch control without any wire connected. Stick the device tightly next to the garage door switch controller using double side tape. Add the device to YoLink App, remotely control the garage door switch controller to open or close your garage door anywhere, anytime. LED light s can show you the current status. See the explanation below: GREEN ONCE Open/Close the garage door. SET BUTTON DOWN BUTTON UP BUTTON BLINKING GREEN Connecting to cloud.
Features Check Status Anywhere - Check device status. Easy to Control - CONVENIENTLY OPEN AND CLOSE your garage door with your mobile device anywhere, anytime. Long Range - Up to 1,000 Feet between Hub and device. Battery Status - Update surplus of battery power and send low battery alert. YoLink Control - Trigger an action of certain YoLink devices without internet.
Set Up YoLink Finger Follow the steps below to set up your YoLink Finger via YoLink App. Step 1: Set up YoLink App Get the YoLink App from the Apple App Store or Google Play.
Step 2: Log in or sign up with YoLink account Open the App. Use your YoLink account to log in. If you don’t have a YoLink account, tap Sign up for an account and follow the steps to sign up an account.
Step 3: Add YoLink Finger to YoLink App Tap the “ ” in YoLink App. Scan the QR Code on the device. You can customize the name, set the room, add to/remove from favourite. a. Name - Name your YoLink Finger. b. Room - Choose a room for your YoLink Finger. c. Favourite - Click “ ” icon to add/remove from Favourite. Tap the “Bind Device” to add the device to your YoLink account.
Step 4: Connect YoLink Finger to the cloud Press the SET button once, the LED light will blink green and your device will connect to the cloud automatically. Note Follow the Installation to install the device first. Make sure your hub is connected to internet.
Installation Note Please add YoLink Finger and Garage Door Sensor 2 to YoLink App before you install them. YoLink Finger Place the YoLink Finger close to the switch panel, use UP and DOWN button to adjust the finger, make sure it is at the right position to press down the switch button and open the garage door. Please dry clean the area first. Peel off the surface on the double-side tape on the bottom of the YoLink Finger. SET DOWN UP Stick tightly the finger to the clean area.
SET UP DOWN 2 Dry clean the area 3 Peel off the surface of the double-side tape 4 Stick tightly the YoLink Finger You can also mount the YoLink Finger to the wall with screws. Please remove the battery cover and take out batteries after position adjusted. Mount YoLink Finger to the wall using provided screws. Reinstall the batteries and cover them.
DOWN SET UP Installation Diagram (Partly) SET UP DOWN DOWN UP SET A B C 10
Using YoLink App with YoLink Finger Note For better user experience, we suggest you to bind your YoLink Finger with a YoLink Garage Door Sensor. Control Display the real-time battery status and signal Intensity of your YoLink Finger. Tap the “Garage Door” in App to go to its controls. Tap the Open/Close button to open or close your garage door.
Details You can customize the name, set the room, add to/ remove from favourite, check device history, set pairing with sensor. a. Name - Name your YoLink Finger. b. Room - Choose a room for your garage door device. c. Favourite - Click Add/Remove the device from Favourite. d. History - Check the history log for the garage door. e. Sensor - Tap to pair or disable pairing with a garage door sensor. f. Delete - Current device will be removed from your account.
YoLink Control YoLink Control is our unique “device to device” control technology. Under YoLink Control, the devices can be controlled without internet or Hub. Devices which send out command is called controller(Master). Devices which receive command and act accordingly is called responder(Receiver). You will need to set it up physically. Pairing SET BUTTON Find a YoLink Remote as controller(Master). Hold any ON button for 5-10 seconds, the light will flash green quickly.
Unpairing SET BUTTON Find the paired controller(Master) YoLink remote. Hold the relative ON button for 10-15 seconds, the light will flash red quickly. Find the paired responder(Receiver) YoLink Finger. Hold the set button for 10-15 seconds, the device will flash red quickly. SET DOWN UP ON The above two devices will unpair by themselves and the light stops flashing. After unbundling, when press the relative ON button on the YoLink Remote, the YoLink Finger will no longer click the switch button once.
Maintaining the YoLink Finger Firmware Update To ensure our customer have the best user experience, we highly recommend you could update our newest version firmware. Tap the “Garage Door” in App to go to its controls. Tap the “ details. ” icon at the top-right corner to go to Tap “Firmware”. P r e s s o n c e t h e S E T b u t t o n o f Yo L i n k F i n g e r. The light will be slowly blinking green during the update and stop blinking when the update done.
Factory Reset Factory reset will erase all your settings and bring it back to default. After the factory reset, your device will still in your Yolink account. Hold the set button of controller for 20-25 seconds until the LED blinks red and green alternately. Factory reset will be done when the light stops flashing.
Specifications Voltage: 3V DC (2 - AA battery) Environment: Working Temperature: 0°C~40°C (32°F~104°F) Working Humidity: 0%~90% non-condensing 17
Troubleshooting Problem Yo L i n k F i n g e r i s o ffl i n e . Possible Reason Solution Hub is offline. Please reconnect your hub to the Internet and press the set button of YoLink Finger once. Hub is powered off. Please power on the hub again and press the set button of YoLink Finger once. YoLink Finger is battery died. Please replace the battery. Please contact customer service. Other problems. Please contact customer service.
If you are unable to get your YoLink Finger working Please contact us during business hours US Live Tech Support: 1-949-825-5958 M-F 9am - 5pm PST Email: support@YoSmart.com YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 WARRANTY 2 Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 2 year from the date of purchase.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.
