User Guide YS4907-UC Gas/Water Valve
Contents What’s Included·····························································1 Introduction············································· ·············· ······ · 2 Features······································································3 Product Requirements······················································3 Set Up Gas/Water Valve····················································4 Installation··························· ··································· ···· · 8 Using YoLink App with Ga
What’s Included Gas/Water Valve A. Power Adapter B.
Introduction Yolink Gas/Water Valve, a device able to remote control one gas Valve or water Valve by IOS or Android device within Yolink App. Along with the Yolink App, connect the Gas/Water Valve to your Yolink Home System, which able to change the status of the device. Also, Yolink Gas/Water Valve is able to respond to different situation after simple set up in Yolink App. LED lights are able to show the current status of device. See the explanation below: Blue Once The Valve is On.
Features Control from anywhere - Control your Gas/Water Valve remotely via YoLink App on your iOS or Android device. Timer & Schedule - Automatically turn on or off Gas/Water Valves after or at a certain time. Long Range - Up to 1,000 Feet between Hub and device. Scene - One-click control. Tap the scene button to automatically turn on or off your Gas/Water Valves and action of other devices. Automation - Set up rules for “If this then that” function.
Set Up Gas/Water Valve Follow the steps below to set up your Gas/Water Valve via YoLink App. Step 1: Set up YoLink App Get the YoLink App from the Apple App Store or Google Play.
Step 2: Log in or sign up with YoLink account Open the YoLink App. Use your YoLink account to log in. If you don’t have YoLink account, tap Sign up for an account and follow the register steps to sign up an account.
Step 3: Add device to YoLink App Tap the “ ” in YoLink App. Scan the QR Code on the device. You can customize the name, set the room, add to/remove from favorite. a. Name - Name Gas/Water Valve. b. Room - Choose a room for Gas/Water Valve. c. Favourite - Click “ ” icon to add/remove the device from Favourite. Then, tap the “Bind Device” icon to add the device to your YoLink account.
Step 4: Connect to the cloud Power on the valve using the supplied power adapter and your device will connect to the cloud automatically. Note Follow the following page to install the device first. Make sure you hub is connected to cloud.
Installation Hold the mounting lug of the Valve with 2 brackets, and lock them with screws. Pass the stainless steel throat through the bracket, then fix it on the water pipe valve and adjust the position. Plug in and power on the device. Note Use the included adapter. The center axis of the manipulator must be aligned with the center axis of the water pipe valve and the corresponding screw is locked. The Valve should not be close to the wall and should be installed more than 20mm from the wall.
Installation Diagram 9
Using YoLink App with Gas/Water Valve Details You can customize the name, set the room, add to/ remove from favourite, set the open alert, check device history. a. Name - Name Gas/Water Valve. b. Room - Choose a room for Gas/Water Valve. c. Favourite - Click “ ” icon to add/remove the device from Favourite. d. History - Check the history log for the Gas/Water Valve. e. Open Alert - Set a time which you will able to receive an alert once your valve has been open for that long. f.
Schedule You can create ON/OFF schedules to automate change the status of Valve to cooperate with your home or work schedules. Tap the “Gas/Water Valve” in App to go to its controls. Tap “Schedule” to go to its schedules. Tap “ ” icon to add a new schedule. Within the Add Schedule, set the time, your preferred state (“ON”, ”OFF” or “ON then OFF”) for the connected device, and repeating frequency. Tap “ ” icon to save. Activate or deactivate schedule at the schedule screen.
Timer With YoLink App, you can set up a timer to turn on or/and off your Valve. Tap the “Gas/Water Valve” in App to go to its controls. Tap “Timer” to go to timer setting. Choose an action from “On After” and “Off After”. Set the timer duration in Hours and Minutes. Tap “ ” icon to save. Note One timer will run only once. You can set a new timer after the timer has already run or once you cancel it. The Timer here is running at device without internet.
Scene Set one-click control for multiple devices in your YoLink App. You only run a scene via your YoLink App. Tap “Smart” to switch to Smart Screen. Tap “ ” to create your own Scene. To set a Scene, you will be able to put one or more devices under this scene, and define their actions and/or states. To execute a Scene, you may tap any scene at “Smart” or “Favourite” if you mark it as favourite. Swipe left any Scene order to edit or delete it.
Automation Automation allows you to set up “IF This Then That” rules so the devices could act a u t o m a t i c a l l y. Tap “Smart” to switch to Smart Screen and tap “Automation”. Tap “ ” to create an automation. To set an Automation, you will need to set a trigger time, local weather condition, or choose a device with certain stage as a triggered condition. Then set one or more devices, scenes to be executed.
YoLink Control YoLink Control is our unique “device to device” control technology. Under YoLink Control, the devices can be controlled without internet or Hub. Devices which send out command is called controller(Master). Devices which receive command and act accordingly is called responder(Receiver). You will need to set it up physically. Pairing Find a sensor as controller(Master). Hold the set button for 5-10 seconds, the device will enter pairing mode. Find a Gas/Water Valve as responder(Receiver).
Unpairing Find the controller(Master) sensor. Hold the set button for 10-15 seconds, the device will enter unpairing mode. Find the responder(Receiver) Gas/Water Valve. Hold the set button for 10-15 seconds, the light will flash red quickly. Gas/Water Valve Model: YS4907-UC SET Power: DC12V-1.5A The above two devices will unpair by themselves and the light stops flashing. When the sensor alerts, the Gas/Water Valve will no longer turn off.
YoLink Control Diagram water leak is detected turn on turn off Paired water leak is detected turn on turn on Unpaired 17
Maintaining the Gas/Water Valve Firmware Update Ensure our customer have the best user experience. Highly recommend you could update our newest version firmware. Tap the “Gas/Water Valve” in App to go to its controls. Tap the “ details. ” icon at the top-right corner to go to Tap “Firmware”. The Feature light will be slowly blinking blue during update and stop blinking when update is done.
Factory Reset Factory reset will erase all your settings and bring it back to default. After the factory reset, your device will still in your Yolink account. Hold the SET button for 20-25 seconds until the LED blinks red and blue alternately. Factory reset will be done when the light stops flashing. Gas/Water Valve Model: YS4907-UC SET Power: DC12V-1.
Specifications Power voltage: 5V DC Motor operating power: ≤9.5W Valve pressure: 1.6MPa Torque: 40kgf.
Troubleshooting Problem Possible Reason Solution Hub is offline. Please reconnect your hub to the Internet and press the set button of the valve once. Hub is powered off. Please power on the hub again and press the set button of valve once. Valve does not power on. Please power on the valve . Product defective. Please contact customer service. Timer does not run. There was a power blackout before timer executes.
If you are unable to get your valve working Please contact Our Customer Service during business hours US Live Tech Support: 1-844-292-1947 M-F 9am - 5pm PST Email: support@YoSmart.com YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 WARRANTY 1 Year Limited Electrical Warranty YoSmart warrants to the original residential user of this product that it will be free from defects in materials and workmanship, under normal use, for 1 year from the date of purchase.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.