LP -C12 S tage Li g ht i n g C o n t r oller Owner’s Manual Manuel d’Utilisteur
IMPORTANT SAFETY INSTRUCTIONS This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
LP -C12 Stage Lighting LP-C12 The Yorkville Sound LP-C12 is a highly flexible stage lighting controller that doesn’t sacrifice ease of use to achieve a wide range of functionality. With twelve channels of lighting control and a broad assortment of chase, audio, and other effects to choose from, the LP-C12 has what it takes to get you through nearly any job you can throw at it. The LP-C12 can be used to control any combination of the Yorkville LP series light bars, including the older LP302 and LP304.
LP -C12 Stage Lighting Color – This rotary encoder is used to select the color of the corresponding light. (The LP302 or LP304 lights will ignore the color control) Intensity – This control is used to set the brightness of the corresponding light head. When this knob is pushed down, it will momentarily flash the corresponding light to full intensity. There is a yellow LED indicator on each channel that illuminates with a brightness corresponding to the brightness of the light on that channel.
LP -C12 Stage Lighting Auto Scene Advance – This feature causes the controller to automatically change through your preset scenes, starting with Scene 6 and going through to Scene 13. At the end of the cycle, it goes back to Scene 6 and continues. The timing knob directly above the switch for this feature controls how frequently scene changes occur. It offers scene-advance speeds from 3 seconds up to 10 minutes. At its center position, it is calibrated to approximately 1 minute intervals.
Stage Lighting LP -C12 Color Fade The color fade function will change the colors at a slow rate, with all the lights the same color. The effects speed control sets the change time. The fastest change will be every ½ second. The slowest is approximately every 4 minutes. With the control in the middle the change is every 15 seconds. Strobe The strobe function is white only and operates from one flash every 3 seconds to 6 flashes per second controlled by the effects speed control.
LP -C12 Stage Lighting Audio In Lights 1-4 Lights 5-8 Lights 9 - 12 Reset to Factory Presets Footswitches Black Out Scene Dn Auto Adv Effects Scene Up Scene 1 A-Z1228R / 1v0 DESIGNED & MANUFACTURED BY YORKVILLE SOUND • TORONTO, CANADA Rear Panel Reset to Factory Presets This control that is accessed through a small hole in the rear panel returns all the settings and presets to the original factory settings.
LP -C12 Stage Lighting LP-C12 Le LP-C12 de Yorkville Sound est un contrôleur d’éclairage de scène très polyvalent qui ne sacrifie pas la facilité d’utilisation pour réaliser un large éventail de fonctionnalités. Avec douze canaux de contrôle d’éclairage et un vaste assortiment de chasse, audio, et autres effets au choix, le LP-C12 a ce qu’il faut pour s’exécuter dans toutes les situations.
LP -C12 Stage Lighting Contrôle de Canal Les canaux sont regroupés en trois rangées de quatre contrôles, chaque ligne correspondant à l’une des sorties XLR à l’arrière du contrôleur. Chaque canal dispose de deux commandes: Couleur - Ce codeur est utilisé pour sélectionner la couleur de la lumière correspondante. (Les LP302 et LP304 vont ignorer la commande de couleur) Intensité - Cette commande est utilisée pour régler la luminosité de la lumière correspondante.
LP -C12 Stage Lighting All On - Cette fonction active toutes les lumières d’une couleur pré-déterminée (couleurs différentes sur chaque canal). Le mode All On sera désactivés et vous retournerez à la scène active si ce bouton est enfoncé alors que le mode All On est actif. REMARQUE: Avec les LP302/LP304, les couleurs seront déterminées par les gels utilisés et non par le programme. BLACKOUT - Comme son nom l’indique, cette fonction va éteindre toutes les lumières connecté.
Stage Lighting LP -C12 Sélecteur d’Effets Les effets marqués sur le côté gauche et en dessous de la commande Select ne sont pas affectées par l’entrée audio. Les effets marqués sur le côté droit et au-dessus de la commande sont affectées par l’entrée audio. Les effets audio à quatre et à trois bandes sont des effets à gamme complète, tandis que le reste des effets audio sont 90 Hz seulement. Chase Il y a quatre fonctions Chase non-audio qui diffèrent par leur couleur.
LP -C12 Stage Lighting Audio In Lights 1-4 Lights 5-8 Lights 9 - 12 Reset to Factory Presets Footswitches Black Out Scene Dn Auto Adv Effects Scene Up Scene 1 A-Z1228R / 1v0 DESIGNED & MANUFACTURED BY YORKVILLE SOUND • TORONTO, CANADA Panneau arrière Ré-Initialisation des Pré-Réglages d’Usine Cette commande qui est accessible par un petit trou dans le panneau arrière retourne tous les paramètres et réglages aux les réglages d’usine.
Stage Lighting LP -C12 LP -C12 Stage Lighting Controller Specifications LP-C12 Stage Lighting Controller Output Channels 12 Scenes 13 Effects 12 Audio Level 75 mV - 100 Volts Audio Input Impedance 600 k between Tip and Ring. 1.8 k Sleeve to GND Audio Input Connector 1/4-inch TRS Data to Lights Connector 3-pin XLR male Communication Protocol Yorkville propietary 31.5 kBits/s Power for Controller 24 Volts, provided by Yorkville light fixture Maximum Cable Length at least 600 ft Dimensions (DWH) 13.
Stage Lighting 12 LP -C12
Two & Ten Year Warranty Two &Ten Unlimited Warranty Yorkville's two and ten-year unlimited warranty on this product is transferable and does not require registration with Yorkville Sound or your dealer. If this product should fail for any reason within two years of the original purchase date (ten years for the wooden enclosure), simply return it to your Yorkville dealer with original proof of purchase and it will be repaired free of charge.
WORLD HEADQUARTERS CANADA U.S.A. Yorkville Sound Yorkville Sound Inc.