User's Manual

ManualsBrandsYokogawa Electric ManualsElectronicsWLAN Redundant Module

Doc. No.: WFC008-A009

Date: 7, September 2012

Rev.1: 4, April 2016

User’s Manual

WLAN Single Module F9195KH

1. Description

F9195KH WLAN Single Module is a dual-band (2.4GHz/5GHz) wireless LAN client with

single WLAN chip module in accordance with IEEE 802.11b/g/a.

2. General Specification

Table1 General Specification

Item

Specification

System Clock

40MHz (Reference Clock)

Operating Power supply

DC 5.0V

Operating Temperature

-40 To +70deg. C.

3. Radio Specification

Table2 Radio Specification

Item

Specification

Equipment type

Transceiver

Frequency of operation

IEEE802.11b/g: 2412 to 2462MHz

IEEE802.11a: 5180 to 5825MHz

Bandwidth / Channel spacing

IEEE802.11b/g: 22MHz / 5MHz

IEEE802.11a: 20MHz / 20MHz

Type of modulation

IEEE802.11b: DSSS

IEEE802.11g: DSSS/OFDM

IEEE802.11a: OFDM

Antenna type

Sleeve antenna(2.14dBi), Collinear antenna(6dBi, 9dBi),

Patch antenna(15dBi)

Antenna connector type

Hirose H.FL unique connector. And the installation and replacement of

antenna are done by professionals as directed in the user’s manual.

Antenna gain with cable loss

+2.14dBi, +6.00dBi, +9.00dBi,+15.00dBi

ITU code

G1D, D1D

Summary of content (4 pages)

PAGE 1
Doc. No.: WFC008-A009 Date: 7, September 2012 Rev.1: 4, April 2016 User’s Manual WLAN Single Module F9195KH 1. Description F9195KH WLAN Single Module is a dual-band (2.4GHz/5GHz) wireless LAN client with single WLAN chip module in accordance with IEEE 802.11b/g/a. 2. General Specification Item System Clock Operating Power supply Operating Temperature 3. Table1 General Specification Specification 40MHz (Reference Clock) DC 5.0V -40 To +70deg. C.
PAGE 2
Doc. No.: WFC008-A009 Date: 7, September 2012 4. Block Diagram Antenna 3.3V DC/DC Regulator V_IN SPI Host IF 3.3Vdc WLAN Chip Module Variable ATT RF IN/OUT Clock Host IF Connector F9195KH Figure1 System Block Diagram 5. Theory of operation 5.1. Power Supply The primary power supply input V_IN is supplied via the host interface connector. The Usable input voltage range for V_IN is 4.5Vdc to 5.5Vdc. This Module have 3.3V DC/DC regulator which convert from the V_IN to regulated 3.3Vdc. The 3.
PAGE 3
Doc. No.: WFC008-A009 Date: 7, September 2012 Rev.1: 4, April 2016 6. FCC Compliance WLAN Single Module F9195KH has been certified per FCC Part 15 rules for integration into products without further testing or certification. To fulfill the FCC certification requirements, the final product manufacture using F9195KH module must ensure that the information provided on the F9195KH module label is placed on the outside of the final product. F9195KH module is labeled with its own FCC ID Number.
PAGE 4
Doc. No.: WFC008-A009 Date: 7, September 2012 Rev.1: 4, April 2016 7. Industry Canada (IC) Compliance Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on the outside of the final product enclosure must display the following text: Contains IC: 8999A-WIC007 This device complies with Industry Canada’s licence-exempt RSSs.