User's Manual

ManualsBrandsYokogawa Electric ManualsElectronicsISA100 Wireless Module

Doc. No.: WFC006-A09

Date: 25 July, 2012

User’s Manual

ISA100 Wireless Module F9195KA

1. Description

F9195KA ISA100 wireless Module provides a high performance RF transceiver solution

for ISA100.11a wireless networks based on 2.4GHz IEEE 802.15.4.

2. General Specification

Table1 General Specification

Item Specification

System Clock 50MHz (Main CPU)

24MHz (Radio Part)

32.768kHz (RTC Part)

Operating Temperature -40 to +65 deg. C.

3. Radio Specification

Table2 Radio Specification

Item Specification

Equipment type Transceiver

Frequency of operation 2405 to 2475MHz

Bandwidth / Channel spacing 2.65MHz / 5MHz

Type of modulation O-QPSK, DSSS

Antenna type Sleeve antenna(2dBi), Collinear antenna(6dBi, 9dBi), Patch antenna(15dBi)

Antenna connector type Hirose H.FL unique connector. And the installation and replacement of

antenna are done by professionals as directed in the user’s manual.

Antenna gain with cable loss +2.00dBi, +6.00dBi, +9.00dBi,+15.00dBi

ITU code G1D

Operating Power supply DC 5.0V, DC 3.3V

(F9195KA is provided with stable power supply from the host device)

4. Block Diagram

Figure1 System Block Diagram

Wireless

LSI

F9195KA

IN/OUT

LAN

Connector

5V DC/DC

Regulator

LAN

DC 24V

DC3.3V

DC5V

LAN

Wireless Part

Main CPU Part

Limited Host

Power Supply

Antenna

3.3V DC/DC

Regurator

24MHz

2405-2475MHz

H.FL

N-type

RTC

32.768kHz

Main CPU

50MHz

Ether PHY

25MHz

Front

End

MC13224V

Summary of content (4 pages)

PAGE 1
Doc. No.: WFC006-A09 Date: 25 July, 2012 User’s Manual ISA100 Wireless Module F9195KA 1. Description F9195KA ISA100 wireless Module provides a high performance RF transceiver solution for ISA100.11a wireless networks based on 2.4GHz IEEE 802.15.4. 2. General Specification Item System Clock Operating Temperature 3.
PAGE 2
Doc. No.: WFC006-A09 Date: 25 July, 2012 5. Theory of operation 5.1. Power Circuitry F9195KA do not have voltage regulator. However, this application limited the host equipment, and F9195KA’s voltage is supplied from voltage regulator of the limited host power supply. (Figure1-broken line block) The limited host power supply contains two regulators, i.e., 5V DC/DC and 3.3V DC/DC (in Figure1) ・ 5V DC/DC supplies a regulated 5Vdc to the 3.3V DC/DC and the RF amplifier in the Wireless Part. ・ 3.
PAGE 3
Doc. No.: WFC006-A09 Date: 25 July, 2012 6. FCC Compliance ISA100 Wireless Module F9195KA has been certified per FCC Part 15 rules for integration into products without further testing or certification. To fulfill the FCC certification requirements, the final product manufacture using F9195KA module must ensure that the information provided on the F9195KA module label is placed on the outside of the final product. F9195KA module is labeled with its own FCC ID Number.
PAGE 4
Doc. No.: WFC006-A09 Date: 25 July, 2012 7. Industry Canada (IC) Compliance Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label on the outside of the final product enclosure must display the following text: Contains Transmitter Module IC: 8999A-WIC003 This Class A digital apparatus complies with Canadian ICES-003. French: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.