Instructions / Assembly

1: Fold the four sides of the outer box of the shoe box in half along the fold line;
2: Fold the sides of the baffle at the bottom of the outer box 90 degrees inward;
3: Fold the baffle with the hole at the bottom of the outer box inward by 90 degrees;
4: insert the baffle with the tab at the bottom of the outer box into the corresponding square hole;
5: The four buckles at the front end of the outer box are folded inward;
6: The plastic outer frame is placed in the front end of the outer box;
7: The four buckles at the rear end of the outer box are folded inward;
8: Insert the plastic frame and step 6 into the outer box back end
9: The outer box is installed.
10: Fold the outer box of the shoe box along the line
11: Fold the sides of the baffle at the bottom of the outer box 90 degrees inward;
12: insert the baffle with the tab at the bottom of the outer box into the corresponding square hole;
13: Fold the four buckles on the upper side of the shoe box inward;
14: Put the plastic outer frame into the box;
15: The two plastic pull rings are interlocked
16: The inner box is assembled.
17: Put the inner box into the outer box
18: Single shoe box assembled