Quick Start Guide

(Side 1)

Quick Start Guide

1. Pull battery tab and press on the top of the battery to ensure it is secure. If you hear a sound

and see a light flashing, you have done this correctly.

2. On your iPhone, open the Find My app. Under “Items” select “Add Item” then “other supported

Item” then “Connect” then you can name your YIP Smart Tag before selecting “Continue.” If you

heard a sound, you have done this correctly.

3. Firmly attach the back cover using your fingers to press down to ensure protection of your YIP

Smart Tag.

4. Remove the blue film from the front of the tag to expose the adhesive tape. With the engraved

side facing away from the adhesive, insert the metal tag and press firmly to ensure the adhesive

is fully attached to the metal tag.

5. Attach the metal split ring through the hole on the top of the YIP Smart Tag.

6. Attach to the item you want to keep track of.

(Side 2)

Having Trouble?

1. Please visit www.fazepro.com/xxxx

for tutorials on how to trouble shoot your YIP Smart Tag.

2. Insert a QR code that takes them to the same website location.

3. Use of the Works with Apple badge means that a product has been designed to work specifically

with the technology identified in the badge and has been certified by the product manufacturer

to meet Apple Find My network product specifications and requirements. Apple is not

responsible for the operation of this device or use of this product or its compliance with safety

and regulatory standards.

4. FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

PAGE 1
(Side 1) Quick Start Guide 1. Pull battery tab and press on the top of the battery to ensure it is secure. If you hear a sound and see a light flashing, you have done this correctly. 2. On your iPhone, open the Find My app. Under “Items” select “Add Item” then “other supported Item” then “Connect” then you can name your YIP Smart Tag before selecting “Continue.” If you heard a sound, you have done this correctly. 3.
PAGE 2
5. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.