HD Digital Wireless Backup Camera & Monitor Kit Product Manual / Installation Instructions Please read this manual thoroughly before operating the device ,and keep it for future reference .
1. Certificate The system were Certificated by: CE & FCC & EMC & RoHs & Waterproof 2.
. Working range We recommend installing this system on Cars,Pickups, SUVs, Campers, Small RVs, Small Trucks, etc under 33 feet. If only used for reversing, it can be installed on vehicle under 40 ft. But the wireless system may have different performance when meeting different vehicles. If you meet any signal issue, please contact us as soon as possible. 4. BEFORE INSTALLATION,PLEASE READING I . Please noted below data of power supply input to the monitor and camera.
II. Please test the monitor and camera before installation . After you receive the system, you must test the device before installation. Please reference the way below image showed. (1) Plug power cords to the monitor and merged the power wires to camera ,red-red, black-black. (2) Loose the screws on green adapter, then insert the red wire(copper wire) to Positive(+) slot, and the black wire(copper wire) to Negative(-) slot. (3) Plug to cigarette lighter and turn on the red switch.
. Installation Video and Signal Repairing I. Please watch below video on YouTube to help you install the system. https://youtu.be/tumtLSV-qZU If you cannot open this link, it may be caused by the wrong type of software. So you can search the video ID: tumtLSV-qZU on www.youtube.com If you don’t find it, please contact us with the Email, we will provide you a link. II. Signal pairing .
button to pair the signal . Step 3 : Just wait for the image appearing . 7. Wires Connection Please pay attention to the positive and negative poles of the wire. If the positive and negative poles are reversed, it may cause no picture. If the monitor is emitting smoke, please turn off the power immediately and contact customer support. (1) The monitor can be powered by a cigarette lighter. (2) If you just need the system used for back-up, please connect the camera to back-up light/reverse light.
8. Warm Tips : If there is no image after you install : 1)Please check connections of power source. (Check if the camera and monitor are powered on) 2)Check if you reverse the positive wire and negative wire (For example: The backup light black is positive, green is negative ,please don’t backward them.) 3)If you cannot identify which wire is positive, you can connect the black wire to ground (metal part on vehicle), then to test the positive wire, which will protect the camera.
II . The monitor can be attached to the dash or windshield depends on your preference. (As for the protective film on screen, you can choose to remove or not protective film) 10.
Note: The default is mirror image with CH1 for rear view,with image flip function you can switch to facing view(front view),or images upside down(Vertical flip) 11. Features Full/Split Screen: The default is CAM1 channel. Click the AV key switch to CAM2 channel, and Click the AV key again switch to the split screen. Guide Lines ON/OFF: Click the Down key to turn on or off.
Click the menu key, below icon appears. The brightness can be adjusted by click the up or down key Click the menu key , when the below icon appears, and the saturation can be adjusted by click the up and down key.
Clicks the menu key,when below icon appears. The image can be flipped, normal image / mirror image.(Four forms ) by click up and down Click the menu key ,when below icon appears, the height and width of the guide line can be adjusted by Click up and down Click the menu key ,when below icon appears, by click the up and down key, the guide lines can be moved to left or right.
Click the menu key,when below icon appears. And then click the Up key to enter pairing. (The signals already got paired before we sent it,you don’t need to pair it again, you only need to pair if there is no images on screen after powered on or you got a new camera) 12.
. Camera Installation The camera was fixed by the original screws on the license plate, no need drill more holes to hook up the camera, easy to install. The camera lens could be rotated 90 degree upside down, you can loose the screws on the back of camera. 14. T-Taps: We have prepared a T-Taps adapter to better protect the cord of the reversing back-up light or tail light, please reference the picture below, which makes the installation easier.
Step4: The step is finished. 15. Antenna There is a thin wire which comes from the camera, seen below image. The antenna is waterproof which can be put outside or inside on the vehicle, and it will not be affected by the water or rain. But please fix it on a proper position, which can make the signals transmission powerful. If your vehicle is large, please make the antenna on the good position.
16. Customer Service Two years quality warranty and life time tech support .Just contact us if any issues you meet. Thank you ! Troubleshooting 1 After installation, you turn on the monitor and camera power without images, at the same time, the monitor turns on for five seconds and then goes black, which means something wrong with the camera. You need to check that the camera is plugged in correctly. If the camera's power cord is not connected correctly to the headlights, there is no images.
2 If your car is a BMW, Benz, or VW brand car, you will find the image flashing all the time after you install this system. Because BMW, Benz, VW's cars repel foreign devices and emit interfering currents. You need to add a relay or filter between the camera and the lamp circuit to form a rated dc power supply.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.