1.
2.
3. Basic instructions 13. Pair your outdoor camera with the Y! Home App. 2}. Before mounting outside, plan the routs of the cable from the power outlet to the camera. 3}. Keep the camera close io the ruler.
4}. Download Y! Home App a. Scan QR code to download Y1 Home App i. Open the app and register an YY! account «. ff you already have an Y! account, you can log in directly, add the camera according fo prompt voice 4.
Bi Add Y! Liquidator Camera to your Y! account a. After you login to the V1 Home App, touch the + Leon on the top right of the screen to add a new devices, br. Select Y1 Outdoor Camera io begin paring. When yellow light blinks and "Waiting to connect” is heard, ouch "The prompt voice has been heard”. ©. Enter S810 and WI-Fi password, then use your Y1 Liquidator Camera to scan the GR code. od. When successfully scanned, touch ‘Next Step to finish pairing. a.
4, Mount device 1} Use the base's screw holes as a template to mark the drill spots. Remove base and girl holes on the marked spots. 2}. Align the base and attach using the screws. wall anchors may be required. if vou are mounting the device to a wooden wall, you can screw the mount directly to the wall, 3} Use the clip to fasten power cords, font fasten too tightly.
43, Bring your camera to the mounting spot. 5}. Attach your camera to the mounted base. Ensure your camera can connect to the nearest WI-Fi spot. 7h. you've already successfully paired your camera with your smartphone, the camera wil automatically connect To WI-Fl when powered on 8). Now you can preview the video on your smartphone, you are unable fo do this it may be caused by poor network, please adjust the router's position. 8).
5. When mounting pay attention to the following a. Av old direct sunlight br, Wind any plants or objects that may obstruct the view ©. We suggest you mount within 8 10 meter range of your router 6. Basic parameters » Timeout resolution: 1920 x 1080 » Lana: 110° Wide-Angle + Audi: Built-in Speakerphone = Video compression: H.
This device complies with Part 15 of the FCC Rules / Industry Canada fence— tempt RSS standard(s). Operation Is subject In the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference they may cause undesired operation. Le presser apparel est former aux CNR industrious Canada applicable ssc apparels radio exempts de license.
+ Reorient or relocate the receiving antenna. « Increase the separation between the equipment and receiver. « Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. « Consult the dealer or an experienced radio/TV technician for help. Rudder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and mad mum {or lesser} gain approved for the transmitter by Industry Canada.