Installation Guide

王伟
N20
Kami Secure Home
Entry Semsor
说明书
85×85mm
2018-12-26
V1.4
2018-12-17
1. 产品名称修改
2. 版本号升级
3. 印刷区去掉CMYK色彩
2018-12-19
1. 颜色调整
2018-12-25
1. Felix 12月22日邮件意见
更新
2. Reset Pin（取卡针）外
观更新
PANTONE 331 Ul
PANTONE Cool Gray 11 Cl
100g晨鸣云镜双胶
You will need to setup the Kami Hub before
installing your Kami Entry Sensors. Please see
the Installation Guide for your Kami Entry
Sensors for instructions on how to get started.
Once your Kami Hub is set up you can continue
with your sensor installation.
Step 1
Please make sure your Kami Hub is setup and
connected to your router. You can refer to the
Installation Guide for your Kami Hub for details.
After logging into your Kami Home App, tap the
“+” sign to select your device or scan the QR
code on sensors.
Power on the hub and put the sensor close to it
(within 12 inches), the Kami Entry Sensor will pair
with the hub automatically.
*Note: The Kami Entry Sensor
can only be paired when the
status indicator is flashing. If it
is not flashing, please use the
reset pin to reset the sensor
and try again.
Operating Range: -10 - 50°C
Wireless Connections: Support
Supported Platforms: Android / iOS
Battery: CR2450-600mAh
Website: www.kamihome.com
Support: 888-878-1584
E-mail: [e-mail]
https://kamihome.com/legal/fcc
SIDE-A:
SIDE-B:
图号
料号
Kami Secure
Home Entry
Sensor x1
Kami window
magnet x1
3Msticker x3
battery x1
reset pin x1
US V1.4
Insert the battery into the sensor .
You can use either the included screws and
anchors or double sided tape to mount your
Kami Entry Sensor.
Screwsbag x1
Status Indicator
Reset Hole
Entry Sensor
Secure Home
Envelope x1
Since the base is magnetic you can choose to stick
it to metal furniture or appliances like a refrigerator
or steel cabinet. No screws or drilling needed.
*Note: Do not mount on metal surfaces that may
interfere with the magnetic sensor.
N20A6099AAAP
6099N20A00AR1A