User's Manual

Product interface: Type-C
Material: ABS+PC+Aluminum alloy
Input: 9V 2A/12V 1.5A
Watch output : 3W
Earphone output: 5W
Phone output: 5W/7.5W/10W/15W
Conversion efficiency: ≥83%
Product color: black/white (rubber oil)
Specification:
Product display:
Compatible Devices:
3-in-1 Magnetic Wireless Charger
USER MANUAL
M9
* iPhone 13/13Pro/13Pro Max/13 mini/12/12 Pro/12
Pro Max/12/12 mini
* Apple Watch 7/6/SE/5/4/3/2.
* AirPods 3/ AirPods pro/ AirPods 2
IMPORTANT SAFETY INSTRUCTIONS
Before Using the unit, please read the user
manual carefully.
* Do not store device in a high-temperature
environment, including heat caused by intense
sunlight or other forms of heat.
* Do not place device in fire or other excessively
hot environments. Exposure to fire or temperature
above 212°F (100℃) may cause explosion.
* Do not use the wireless charger in excess of its
output rating. Overloading outputs above its rating
may result in a risk of fire or injury to persons.
* Do not expose the wireless charger to rain or
snow.
* Do not modify, repair or disassemble the unit.
If you need to do so, please contact the
manufacturer first.
* Switch off the wireless charger when not in use.
The wireless charger will automatically switch off
when disconnected from its wall charger.
Q&A
FCC Warning
When I place the phone on the charger, it starts
charging, but after a few minutes it stops and the
light starts to flash. Why?
- 1. Make sure your device supports the Qi wireless
charging function before using this wireless charger.
- 2. Check if you are using the QC 3.0 adapter to
power our wireless charger, or test with another
adapter.
- 3. Test with other USB cables.
- 4. Check whether your device’s case contains metal.
Magnetic and metal attachments will cause an LED
flash and prevent charging. If the phone has a case,
please make sure the thickness is less than 0.2 in or
remove the case before charging.
- 5. Please place the phone correctly. If the phone is
placed in the incorrect position, it will affect charging.
- 6. Restart your phone.
Why can't I charge my EU Compliance statement: RF Specification
Manufacturer:
Address:
UK compliance statement：
AirPods 2?
- 1. Make sure your device supports the wireless
Shenzhen Yifeng Intelligent Technology Co., Ltd.
Hereby declares this device in compliance with the
essential requirements and other relevant provisions
of Directive 2014/53/EU.
WPT: 110KHz-148KHz
Radiated H-Filed: -10.48dBuA/m (@10m)
WPT for Watch: 300KHz-350KHz
Radiated H-Filed: -25.8dBuA/m (@10m)
A copy of the EU Declaration of conformity is available
online at /euro-compliance https://www.YFZN.com/
Shenzhen Yifeng Intelligent Technology Co., Ltd.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
The equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
FCC RF exposure statement:
Any Changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
10th Floor, Building 2, Chaxi, Zone B, Huafeng First
Science Park, Hangcheng Street, Gushu, Baoan
District, Shenzhen, China.
A copy of the UK declaration of the conformity is
available online at https://www.YFZN.com/
UKCA-compliance
Shenzhen Yifeng Intelligent Technology Co., Ltd.
Hereby declares that this device is in compliance
with the essential requirements and other relevant
provisions of the UK Radio Equipment Regulations
2017 (SI 2017/1206).
charging function.
- 2. AirPods 2 is divided into two series; one supports
wireless charging and the other cannot support
wireless charging.
- 3. When your AirPods 2 has an indicator on the
outside of the shell, it can support wireless charging.
When your AirPods 2’s indicator is inside the clam
shell, it can’t support wireless charging.
- 4. You can confirm by contacting the customer
service.
THANK YOU FOR CHOOSING OUR PROUDUCT
Dear users, thank you for purchasing this product .
ln order to further understand the product, please
read this manual carefully before use.Wish you a
pleasant experience.
Preface: Product Details:
Wireless charging area for mobile phone
Magnetic charging area for Apple watch
TWS headset charging area
Indicator lamp
Charging stand
Phone 15W Max
Watch 3W Max
Earphone 5W Max
Indicator light 20 off
USB-C port
ABS+PC
Aluminum alloy