User Manual 1
Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment . FCC- Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a communications.
Precaution and Notice ¾ ¾ ¾ ¾ ¾ ¾ GPS is operated and controlled under the sole responsibility of the Government of the United States of America, who are responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of your device .We can not accept any liability for the availability and accuracy of GPS. The PND is used only as a navigation aid.
ⅠBasic Introduction 1. Overview A B C D E F A：Power Switch B：USB Connector C：Earphone Jack D：AV-IN E：Reset Key F：Speaker 2. Accessory 2.1 Charging by AC adapter Please use the AC adapter to charge the device for the first time. To maximize the life of the battery, the device must be full of charge for the first time. Plug the adapter’s DC port into the device’s USB port on its right-side panel Plug the adapter into the main supply socket. The charging indicator will light.
device. 2.3 USB Cable usage The USB cable is provided for system upgrades. This USB cable will work on the PC either with Microsoft Active Sync® or as a mass storage media. You can select the mode in the “System-Sys Info-USB” menu. For upgrade and more information about Microsoft Active Sync, please visit Microsoft web. 2.4 Install the Car Mount System Take off the protected film on the bottom of the suction.
2. Power saving Press the power button on the top side of your device to turn off your device, the device actually enters a suspend state and the system stops operation. Once you turn on the system again, it resumes. 3. Main Functions Press the POWER button to turn on the GPS unit. The Main Menu screen will be displayed as below: 3.1 Navigation Double tap the “Navigation” icon to start program.
2) Double tap your desired file and enter into the following interface. A: return to the Media menu B: volume control C: return to previous menu D: next E: previous F: stop G: speed bar H: pause/play 3.2.2 Photo 1) Tap the "Photo" icon on the media menu and enter into the following interface. 2) Double tap the file on the screen and enter into the following interface.
A: return to the Media menu B: next C: return to previous menu D: current picture name E: Zoom in F: Zoom out G: full screen H: rotate Tips: Tap FULL SCREEN button, it will display in full screen size. When playing in full screen, double press the screen again, it will return to original playing size. 3.2.3 Ebook 1) Tap the "Ebook" icon on the media menu and enter into the following interface. 2) Double tap the file and enter into the following interface.
A: Return to the Media menu B: Previous C: Next D: Return to previous menu E: Pages chose F: Current page/total pages G: Current file name 3.2.4 Video 1) Tap the icon "Video" on the media menu and enter the following interface. 2) Tap the file you desired and enter into the following interface. A: Return to the Media menu B: Pause/play C: Stop D: Speed up E: Volume control F: Full screen G: Return to previous menu H: Speed bar Tips: Tap NEXT button to recycle the movie.
3.3 Bluetooth Tap the icon “Bluetooth” on the main menu and enter into the following interface. 3.3.1 Phone keypad 1) Tap the icon on the Bluetooth menu and enter into the following interface. A B C D A Return to the Bluetooth menu B Backspace C Pair and connect with the mobile you want D Call Record 3.3.2 Call Record 1) Tap the icon on the Bluetooth menu and enter into the following interface.
A Return to the Bluetooth menu B Previous C Next D Connect with the mobile you want E Delete all the call records F Delete the recorded number you chose G Hang up the number you dial H Incoming call record I Outgoing call record 2) Connect with the mobile you want and enter into the following interface. 3） Connect successfully with the mobile you want and enter into the following interface.
D Hang up the number you dial E Show up the number keyboard or not F Turn up the volume G Minimize the interface Tips:When there is incoming call., the following interface would appear. 3.3.3 Pair Tap the icon on the Bluetooth menu and enter into the following interface. 3.3.4 Dun Setting 1) Tap the icon on the Bluetooth menu and enter into the following interface.
Tips: Tap the button to disconnect the Dun that you selected. 2) Select the Dun device you want and enter into the following interface. Tips: Tap the Connect button and when it connectes successfully,the word “Connect”would be white and the word at bottom would be “Connected”. 3.3.5 Attribute 1) Tap the icon on the Bluetooth menu and enter into the following interface. A B A PIN Setting B Music Setting 2) Tap PIN Setting button and enter into the following interface.
3) Tap Music Setting button and enter into the following interface. Then tap the icon you desired and choose the music file as the ring of incoming call. 3.3.6 Pair Devices 1) Tap the icon on the Bluetooth menu and enter into the following interface. A B E C D A Return to the Bluetooth menu B Next C Delete all the Devices information D Disconnect the Devices you chose E Connect the Devices you chose 3.3.
1) Tap the icon on the Bluetooth menu and enter into the following interface. 2) Tap the KeyShow ,input the website you want and press the key “enter”. For example: Tips: Make sure PND connected with the Mobile before your using this function ,or it will enter into the interface of Dun Setting. 3.4 System setting Tap the icon "System" on the main menu and enter into the following interface.
3.4.1 Backlight Tap the "Backlight" icon and enter into the following display. A. Tap "-" to weaken the backlight, and tap "+" to stronger the backlight. B. Under battery icon, tap “<” or “>” button to select the duration of auto power off the backlight. C. Under AC power icon, tap “<” or “>” to select the duration of auto power off the backlight when using AC adaptor. 3.4.2 System Info Tap the "Sys Info" icon and enter into the following display. A. Tap the icon “USB” to set the USB working mode. B.
3.4.3 Language A. Tap the icon "Language" and enter into the following interface: 3.4.4 Power Tap the icon "Power" and enter into following interface: 3.4.5 Volume A.
B. Tap"-" or "+" to adjust volume of speaker. C. You can select "Enable sounds for taps" and "Use FM". D. Tap "<"or ">" icon to increase or decrease the emissive frequency of FM. Fix the transmission frequency first. Turn on the car radio and tune the radio at the same frequency. Then you can hear the voice the navigation device coming from the car radio’s loudspeaker. Note：When use the FM Transmitter function，the device must be connected to the charger. 3.4.6 Date Time A.
C. Tap "Time Zone" icon and use "<" or ">" icon to adjust the time zone. This document is for guidance only and does not form part of any contract, and may be subject to change without notice.
