USER MANUAL 21.5 inch Windows optical bonding touch pc Pictures are image files and may have variations from the actual product. Changes on the product or specifications of the manual are subject to change without prior notice to improve performance or quality. © Kuori Oy 2020 All trademarks are owned by their respective owners.
1.
21.
21.5” Windows optical bonding touch pc Before Using the Product Safety Precautions Please be careful when handling this device and follow all the instructions, warnings and caution notes. If instructions are not followed a serious or fatal injury or damage to properties may result. Cleaning Take care when cleaning the product as parts may become loose, disconnect or get scratched. Please only use the following products when cleaning: Use a dry microfiber cloth.
21.5” Windows optical bonding touch pc Installation Warnings! - - - DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. This can result in a fire. Do not install the product in spaces that are poorly ventilated or completely enclosed, to avoid an increased internal temperature as this may cause fire.
21.5” Windows optical bonding touch pc - - Do not insert any objects into the product (fans, ports, etc.) especially ones that burn easily (cardboard, paper, matches, cloth, etc.) or are metallic (coins, hairpins, needles, nails, etc.). o In case of foreign substances, objects or water having entered the product, please disconnect the power cord to avoid product failures, damage, electric shock or fires and contact customer service.
21.
21.5” Windows optical bonding touch pc Ports and Buttons Parts Power button Main Power Parts Power HDMI 4x USB 2x RJ45 Line_out Parts Antennas: 1. Wi-Fi Page | 8 Description Power button. Press to power up or enter the standby/shutdown mode or press and hold for 6 seconds to switch the product on or off. The 6 second long press should only be used in case of full Windows operating system non-responsiveness for at least 15 minutes.
21.5” Windows optical bonding touch pc Parts 2x USB 3.0 RS232 RS485 Description Connect to a USB storage device, wired keyboard or mouse. Serial port RS232 Serial port RS485 Before Installing the Product (Installation Guide) IMPORTANT: Please note that the device must be installed so that it must not face direct sunlight! In order to prevent damage to the product or personal injuries, this product must be attached securely according to the installation instructions.
21.5” Windows optical bonding touch pc Before connecting cables Please note that the color, shape and other appearance of the parts may differ from the images below. Specifications are subject to change without notice to improve the overall quality of the product. IMPORTANT: Please do not connect the power cable before you have connected all other cables.
21.5” Windows optical bonding touch pc Insert an RJ45 cable into the ETHERNET port labeled with RJ45, after taking off the lid. Please use only a Cat7 (shielded twist pair Type) cable for the connection. (10/100 Mbps) Connecting an RS232 cable Please note that the color, shape and other appearance of the parts may differ from the images below. Specifications are subject to change without notice to improve the overall quality of the product. The connection parts may differ in different products.
21.5” Windows optical bonding touch pc 2. Tap the Power button in the lower-left corner. There will be three (3) options on display, which are Sleep, Shut down and Restart. 3. In order to power the product off tap Shut down. 4. After the device has been shut down please press the red power switch in the off position and unplug the power once not needed.
21.5” Windows optical bonding touch pc Status Bar The status bar in the lower-right corner of the screen displays a variety of indicators such as Wi-Fi connection, speaker level and more. If you want to make changes to the settings such as Wi-Fi or volume or investigate an issue related to those, tap the icon related to it. For example, tap the loudspeaker icon to adjust the speaker volume or tap the Wi-Fi icon to change the Wi-Fi or switch or Airplane mode. Connection to a Wi-Fi Network 1.
21.5” Windows optical bonding touch pc Signing in with your Microsoft account 1. Tap on the Windows Icon 2. Go to Settings Accounts Your account and sign in with a Microsoft Account Ejecting attached USB devices In order to safely remove an attached USB-device it should be ejected before being unplugged. Please follow the steps below: 1. Please save any open documents on the USB drive and close them. 2. Tap on the Windows Icon and then the search bar icon 3.
21.5” Windows optical bonding touch pc Technical Specifications Screen specifications Model Name 21.5” Windows optical bonding touch pc Panel Size 21.5” Resolution 1920 x 1080, Full HD Touch technology PCAP, 10 touch points Brightness 350 nits Contrast 1000:1 Audio // Internal speakers 2 x 5W RAM 8 GB Processor Processor Intel® Core i5 RAM 8GB Harddrive DDR4 Harddrive 128 GB SSD Operating system Windows 10 Connectivity 4x USB and 2x USB 3.
21.5” Windows optical bonding touch pc Additional notes: - During the manufacturing process of this product and its nature, approximately 1 pixel per million may appear brighter or darker on the screen. However, this does not affect the performance of the product. - In a domestic environment this device may cause radio interference. Please take appropriate measures if needed. FCC Statement This device complies with part 15 of the FCC rules.
21.5” Windows optical bonding touch pc Appendix Warranty Defining non-warranty cases If service is requested, during the warranty period, service fees may apply in the following cases: - The issue is not a product defect. The product damage has been caused by the customer or a third party. The product has been physically opened by a non-certified service technician.
21.5” Windows optical bonding touch pc Service Information Please note that this device should only be serviced by those authorized and specifically trained to ensure adequate servicing techniques. Warranty Statement The manufacturer grants a two (2) year warranty period for its products from the day the product has been originally delivered. This limitation does not apply to state law warranties. The warranty covers structural, production and material faults.
21.5” Windows optical bonding touch pc Screensaver Using a screensaver is highly recommended. Ideally use a screensaver that is either single colored or with a moving image. Power off Please power off the product for approximately 2 hours for every 12 hours of usage. Terminology Source Input source refers to an external device that is connected to the product. Resolution Resolution refers to the number of horizontal and vertical pixels that form a screen.