User Manual UHF Transceiver XP-400D YeonHwa M Tech Co.
1. XP-400D Series Main Features The XP-400D Digital Radio was developed by YeonHwa M Tech Co.,Ltd to be user-friendly and compact design, to have various features and to use at the construction / industrial / commercial / public areas for the safety & convenience of users. It provides better communication distance, audio quality and volume, duration of use through digitalization than Analog radio. The followings are the main features of the XP-400D Series Radio. 16 Zones and 32 Channels are selectable.
2. Specification 2.1 XP-400D General Frequency Range 410 ~ 470 MHz Frequency Stability ± 1ppm (-30 to +60℃) Programmable Channels 16 Zones / 32 Channels Channel Spacing 12.5KHz Digital Vocoder AMBE++ Dimensions 99mm(H) x 51mm(W) x 21mm(D) Weight 250g Power Source DC +7.5V Li-ion 2,600mAH Battery Current Drain (maximum) Receive mode, rated audio out – 320 (Audio Max) Transmit mode – 1,800mA Standby mode – 120mA Receiver Sensitivity 0.25uV 12 dB SINAD Squelch Sensitivity 0.
3. Checking items in the package Components could be changed by buyer request.
3.
Figure 3-3) LCD Indication of XP-400D Series Radio 4.1 Basic Button Operations Button Operation Description Pressing PTT button, the radio mode is transmission and releasing the PTT Button button, it is receiving mode. It is recommended to talk 5~10cm away from the microphone for the best voice communication. Power ON/OFF Volume Switch Turning the volume switch knob clockwise to power on and turning the knob counterclockwise to power off.
4. Basic operation Please fully read the instruction manual before use. This manual provides important information related to radio operation. 4.1 Installation and Removing the Antenna To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise. To remove the antenna, screw the antenna counter clockwise.
Figure 4-2) Installation and Removing the Battery 4.3 Installation and Removing the Belt Clip - To attach belt clip to radio, align belt clip rails with the grooves in radio and slide the belt clip onto the mounting rails until it latches into place. - To remove belt clip from radio, push up on tab of belt clip with flat bladed screw driver and at the same time, slide the belt clip towards the top of Radio figure4-3). Figure 4-3) Installation and Removing the Belt Clip 4.
Figure 4-4) Accessory connector 5. Radio operation The definition of the various buttons of the XP-400D series is the same as Figure 5-1).
5.1 Power ON/OFF, Volume Switch Turning the volume switch knob clockwise to power on and turning the knob counterclockwise to power off. And when set an audio volume level, please refer with the index on the side of the volume knob. 5.2 PTT Button Pressing PTT button, the radio mode is transmission and releasing the button, it is receiving mode. It is recommended to talk 5~10cm away from the microphone for the best voice communication. 5.
5.5 CH/Menu UP/Down Button " CH / MENU UP" and "CH / MENU Down" are to change channels and in the menu entry mode, it is select the UP / Down of the Menu. 5.6 EAR/MIC Jack Accessory connector is used to connect external speaker Mic, and headset, etc. Please close the cover when nothing is connected. 6. Charging the Battery 6.1 Safety Notes 1) The radio of XP-400D series receives power from high-performance Li-ion battery (XL-260).
Figure 6-1) Battery charging 6.3 How to charge 1) Plug the adapter of the TAD-800L charger in general power AC220V power outlet. 2) When charging the battery that is equipped with radio, please turn off the power of the Radio and plug the Radio in the charger. 3) Even if charging is completed (green lamp lights), please charge more for about 30 minutes for a full charge.
XC-100/200 Specification Description XC-100 XC-200 DC+12V DC+12V Slot 1 2 Battery XB-2400 XB-2400 Quick charging time In 5 hours and half In 5 hours and half Operation temperature -20℃~+40℃ -20℃~+40℃ Dimension 70(W)x58(D)x36(H)m/m 70(W)x104(D)x36(H)m/m Charging current 870mA(Rapid charging) 870mA(Rapid charging) Input voltage 7. Using the XP-400D Series 7.1 Menu description Press the Menu/OK button on the front to enter the menu mode.
ICON - : Individual Contact List (individual Call , Sending individual message) - : Group Contact List (Group Call , Sending group message) - : All Contact List ( All call, Sending Message to terminal which has same channel and same color) 7.1.2 Message When a new message arrives, the contents will be display on LCD in receive mode. And if you are in other mode, it will be seen in the ICON form when a new message arrives. Message menu has a simple message, inbox, outbox, three kinds of menu.
2) Outbox It is possible to store up to 10 outbox record and it can see the opponent ID. When outbox is more than 10, the earliest outbox record is cleared first and it is registered. If you want to delete outbox record it can be deleted by selecting delete all menu. 7.1.4 Call Recording This function is used to save the outgoing and incoming calls content. If the recorded content is not required, it can be completely deleted.
This is a feature to encrypt the incoming and outgoing voice. Voice Encryption function can be set for each channel from all of the digital channels. The setting of voice encryption code is using the CPS program, the total number of encryption can be set from 0 to 65535. 3. VOX VOX function is transmitted by detecting a voice level without using the PTT button VOX sensitivity level is 1 - 5 steps, you can set using the CPS program. 4.
11. Language The feature is to select the language for the menus. 12. Screen Screen consists of ① Screen1 ② Screen2. 13. Power Save Power save consists of 4 steps: ① OFF ② 1: 1 ③ 1: 2 ④ 1: 4. 7.1.8 Radio Information A menu that shows the information in this device..
8. Precautions 8.1 Matters affecting the performance of the equipment. Don’t remove the antenna from the Radio or don’t transform the antenna or don’t make any change on the antenna. The strong electronic wave to be emitted from the Radio can have an effect on the performance of the Radio and can cause the Radio to have a defect. Don’t use the accessories (such as rechargeable battery, adaptor, external speaker microphone and earphone, etc.
In case of the area that medical equipments are being used, please use the Radio after discussion with the equipment maker or the related doctor. Please don’t use the Radio at the place where computer or the other electric/electronic devices are being used, because the strong electronic wave from the Radio can have an effect on the equipments. 10. Safety Notes Please make sure to read the followings for safe and effective use of the Radio. • Please keep the Radio away at least 1inch from the body.
10.1 Inportant Safety Information • Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of YEONHWA M TECH-approved antennas, batteries, visit the following website: http://www.xradio.co.
Date 2014. 10. 04 Version No. Subject HS10-YH455-WSM 1.0 Antenna Specification 1.1. General Standard General specification Model name HS10-YH455-WSM Antenna type WHIP Antenna 1.2. Electrical Standard Electrical specification Frequency range 455.0㎒ V.S.W.R 1.9 : 1 Max. Gain(dBi) 1±0.5 Radiation pattern Omni-directional Polarization Vertical Max Power(W) 5W Max. Impedance 50 Normalizer 1.3.
Warranty Card Thank you for purchasing XP-400D Series. 1. This product has passed strict quality control and testing process. 2. Warranty is one year from the day the factory. • Failure of the product under normal operating conditions, during the warranty period may be repaired by YeonHwa M Tech Co.,Ltd or our authorized service organization free of charge. 3. For the following cases, some service fees will be charged.