DX-6000 Series User Manual VHF Transceiver DX-6100 DX-6200 UHF Transceiver DX-6400 Version #1 (2019-03-25) Yeon Hwa M Tech Co.,Ltd. 36, Jeonpa-ro 44beon-gil, Manan-gu, Anyang-si, Gyeonggi-do, 14086, Korea Tel : 82-70-7436-3296 / E-mail : saleshan@xradio.co.kr / Web : www.xradio.co.
1. DX-6000 series features DX-6000 series is designed to provide ease of use the functions of digital radio and it is an easy grip radio for the hand. It’s developed for the consumer safety and convenience in complex public places such as military, fire department, construction, industrial field. In addition, it works in dual (analog/ digital) mode and is compatible with existing analog radio currently.
2. Specification 2.1 DX-6000 Series General Frequency Range DX-6100 : 136~174 MHz DX-6200 : 245~254 MHz DX-6400 : 400 ~510 MHz Frequency Stability ±1.5ppm (-30 to +60℃) Programmable Channels 16 Zones / 32 Channels Channel Spacing 12.5KHz Digital Vocoder AMBE++ Dimensions 103mm(H) x 52mm(W) x 32mm(D) Weight 280g Power Source DC +7.
3.
3.
Figure 3-3) DX-6000 series LCD icon explanation 3.2 Basic operation description Button Power On/Off volume switch Volume/ Menu +/- button Description Turning the power On/Off volume switch clockwise, the radio is turned on and the volume is louder. Turning the power On/Off volume switch counterclockwise, the radio is turned off and the volume is decreased. By using +/- buttons to adjust the call volume. Press the + button to increase the volume and the – button to decrease the volume.
4. How to operate the basic functions Please read the instruction manual thoroughly before using the product. This manual provides useful information related to the operation of the radio. 4.1 Antenna installation and Removal Turn the antenna clockwise to tighten the antenna and counterclockwise to loosen the antenna as the Figure 4-1. Figure 4-1) How to tighten and loosen the antenna from the radio 1. Do not over tighten the antenna as it may cause damage to the radio 2.
Figure 4-2) How to install and remove the battery 4.3 Belt Clip Installation and Removal As shown the figure 4-3, align the on the belt clip holder and push it in the direction 1. For removing the belt clip, push the belt clip locker in the direction 2 and pull the belt clip in the direction 3. Figure 4-3) How to install and remove the belt clip 4.
Figure 4-4) External accessory connector jack 4.5 How to charge the battery RED lamp indicates the radio is on the charger (XC-200D) that the unit is staring to charge and the LED will illuminate GREEN when the charging is completed. XC-200D is developed as the double-ended to charge the main body and the battery pack itself.
5. Operation of the radio DX-6000 series body buttons are defined as shown the figure 5-1. Figure 5-1) DX-6000 series button definitions 5.1 Power ON/OFF Volume Switch Turning the volume switch to the right to turn on the LCD with the start-up sound and turn the radio on. Turning the power ON / OFF switch to the left while the radio is on will turn off the power with the message "Goodbye".
5.4 Menu Button After pressing menu button, press right button of the menu screen, the menu appears as shown in Fig. 5-2). Press the move button to move to the left and press the Menu button again on the selected menu to enter the detailed menu. Figure 5-2) DX-6000 series menu Figure 5-3) DX-6000 series menu tree 5.5 Channel Menu UP/Down Button Channel menu UP / Down button operates as normal channel UP / Down button and also it operates as menu UP / Down selection function when entering menu mode. 5.
5.7 P1, P2, P3 Programmable Button The P button performs two actions as Short Key and Long Key (pressing longer than 2 seconds). The Short Key can be used to configure the functions in the PC program. Key Lock is automatically set when there is no input information for 10 seconds. If you want to cancel the Key Lock function, press the P1 key with the Long Key to cancel and use all the keys. If there is no input information for 10 seconds, Key Lock mode will be activated automatically again.
6. How to charge the battery 6.1 Precautions 1) The DX-6000 series uses a large-capacity Li-ion battery (XB-2600). The battery is safe and highly reliable, the standard charger allows you to fully use the battery's efficiency and life. Charging in a third party charger will cause damage to the battery as well as damage to the unit. 2) For optimal capacity and safe operation of the device, please charge the battery before use.
7. DX-6000 series radio operation 7.1 Menu functions To enter the menu tree, press button. There are 8 main menus in menu mode. The user can use the radio more conveniently if the user set it according to usage purpose and environment. Figure 7-1) DX-6000 series main menus ☞ Note) If the menu is not operated for at least 25 seconds after launch, the radio will revert to standby mode. 7.1.1 Contact Select the transmission contact (set by CPS program) and press the PTT button to make a call.
By using the CPS program, the user can register total 10 messages and 1 message can be edited up to 40 characters. The user can see the registered message by selecting the simple message menu, select the message the user wants to send, and press button to view the message contents. Press button again to send the selected message to the registration terminal. 2) Inbox. A maximum of 10 messages can be received from the inbox.
7.1.4 Record Call recording is a function to save the contents of outgoing and incoming calls. If a user does not need the recorded contents, the user can delete it all. The user can save up to 63 calls and single call is limited to 2 minutes and 30 seconds. The user can use the call recording function, select it on the setting menu. When the encryption mode is selected, only encryption mode call is recorded, and if encryption mode is not selected, normal call contents cannot be heard. 7.1.
This is a feature to encrypt the incoming and outgoing voice. Voice Encryption function can be set for each channel from all of the digital channels. The setting of voice encryption code is using the CPS program, the total number of encryption can be set from 0 to 65535. 3. VOX VOX function is transmitted by detecting a voice level without using the PTT button VOX sensitivity level is 1 - 5 steps, you can set using the CPS program. 4.
11. Language The feature is to select the language for the menus. 7.1.8 Radio information A menu that shows the information in this device.
8. Precautions 8.1 Matters affecting the performance of the equipment. Don’t remove the antenna from the Radio or don’t transform the antenna or don’t make any change on the antenna. The strong electronic wave to be emitted from the Radio can have an effect on the performance of the Radio and can cause the Radio to have a defect. Don’t use the accessories (such as rechargeable battery, adaptor, external speaker microphone and earphone, etc.
9. Safety Notes Please make sure to read the followings for safe and effective use of the Radio. • Please keep the Radio away at least 1inch from the body. • If the outside surface of antenna gets stripped out, it can make a burn on the skin. • If you contact a conductive metal to battery terminal, a heat can be made and it may cause fire, explosion and burn. Especially, please be careful when putting the battery in a pocket or a bag.
Warranty Card Thank you for purchasing DX-6000 Series. 1. This product has passed strict quality control and testing process. 2. Warranty is one year from the day the factory. • Failure of the product under normal operating conditions, during the warranty period may be repaired by YeonHwa M Tech Co.,Ltd or our authorized service organization free of charge. 3. For the following cases, some service fees will be charged.
FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two co nditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC statement English Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1, This device may not cause interference. 2, This device must accept any interference, including interference that may cause undesired operation of the device.
Cautions 1 The device complies with RF specifications when it is used at 25mm distance from your body. 2 Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions. 3 Adapter shall be installed near the equipment and shall be easily accessible. 4 EUT Temperature:-10℃~+40℃. 5 Adapter information: Model name: DSA-12PFA-09 FEU 120100 Input: 100 ~ 240 V 50/60 Hz 0.5A Output: DC 12V/1A Hereby, YeonHwa M Tech Co.,Ltd.