User Guide

EZC- 5300 User Mamual

Hardware/WIFI driver installation：

For Windows 10,the driver will be installed automatically.

1.Plug the EZC-5300,the driver will be installed automatically.

2.After installing the driver,the driver name can be found in Windows Device

Manager,Then you can start to use the adapter via wifi(Realtek 8822CU Wireless LAN 802.11ac USB NIC)

For Windows XP/7/8:

Plug EZC-5300 into a USB port,right-click "This PC",select Manage>Device Manage>

Other devices,right-click "802.11ac NIC",select"Update driver",find the downloaded driver

from: https://www.ezcast.com/app/ezcast/wifi-adapter/windows

PAGE 1
EZC- 5300 User Mamual Hardware/WIFI driver installation： For Windows 10,the driver will be installed automatically. 1.Plug the EZC-5300,the driver will be installed automatically. 2.After installing the driver,the driver name can be found in Windows Device Manager,Then you can start to use the adapter via wifi(Realtek 8822CU Wireless LAN 802.11ac USB NIC) For Windows XP/7/8: Plug EZC-5300 into a USB port,right-click "This PC",select Manage>Device Manage> Other devices,right-click "802.
PAGE 2
Bluetooth Driver Installation 1.Visit https://www.ezcast.com/app/ezcast/wifi-adapter/windows to downland the Bluetooth driver 2.Open this folder,double click the Setup.exe to complete the installation 3.Afer the instalation is successful, the device can be found in the device manager. i f you has any quest i on, pl ease cont act wi t h suppor t emai l : shaphanus@out l ook.