507 IoT Lock Operation Manual V1.0.0 Wenzhou Yeeka Lock Technology Co.,Ltd Address:No.49,Fuyang North Road, Sanxi Industrial Park .Ouhai district, Wenzhou,China Tel：+86-577-89609068 Mobile：+86-13588925107 www. yeekaco.com E-mail：info@yeekaco.
Contents 1. Preface .......................................................................................................... 4 1.1 Read and keep instructions .......................................................................... 4 1.2 Support and Services.................................................................................... 4 1.2.1 Warranty ........................................................................................................ 4 2. Overview .....................
.5.3 Access way of RS485 Remote Control: ................................................... 13 3.5.4 Access way of password： ...................................................................... 13 3.5.5 Access way of card read: ......................................................................... 13 3.5.6 Access way of QR code: .......................................................................... 13 3.5.7 Access way of finger print: .....................................................
1. Preface Thanks for choosing 1507 IoT lock. On behalf of Yeeka team, we thank you for your purchase. The instructions in this manual provide technicians with information on the installation, operation, and setting of the 1507 IoT lock.Please supervise inexperienced users to ensure pleasant and safe operation. 1.1 Read and keep instructions Please read and understand this manual before using the 1507 IoT lock.Retain all instructions for future reference and provide it to subsequent users of the product.
2. 2.1 Overview Usage The 1507 series intelligent lock is suitable for data center, which can solve the problem of authority management and data asset security.In addition, the intelligent lock can be controlled remotely and the temperature and humidity of cabinet can be remotely collected. The access ways can be obtained through mechanical key, password, card, fingerprint, Bluetooth, remote management platform and mobile APP.
2.2 System Architecture Diagram Management Platform Switch Access Unit Access Unit Wireless Wireless electronic lock Wired electronic lock yeekaco.com www.
2.
3. IoT Lock instructions 3.1 Product appearance yeekaco.com www.
3.2 Installation Diagram Screw Panel Lock Cam Mounting bracket Locating plate yeekaco.com www.
3.3 Wiring Diagram Pin No 1 2 3 4 5 6 7 8 Color Signal Definition Wire Gauge 12V + GND 485+ 485DO+ DOlock status lock status UL2464/26AWG Red Black Yellow Green White Blue Orange Brown 3.4 Functional schematic diagram 3.4.1 Password functional schematic diagram yeekaco.com www.
3.4.2 3.4.3 Card read functional schematic diagram Finger print functional schematic diagram yeekaco.com www.
3.4.4 Lock back functional schematic diagram GH Joint With buckle can not be pulled by force Reset button Long press for three seconds to restore the factory settings. Bar code Contains lock hardware information Setting button for fingerprint or card Back 3.4.5 Head functional schematic diagram External power interface Interface type: type-c Used for emergency power supply unlock yeekaco.com www.
3.5 Operation Instructions 3.5.1 Access way of Mechanical key: Use the key to open the emergency cylinder in an emergency situation, and then lift the handle to unlock. 3.5.2 Access way of DO Remote Control: The lock can be unlocked by connecting the two wires of the lock DO. 3.5.3 Access way of RS485 Remote Control: The lock can be unlocked by issuing the unlock command to the two lines of the lock 485. 3.5.
LED keeps on, then you can lift the handle and open the lock. 3.5.7 Access way of finger print: Read the authorized finger print in the area of card read; at this moment the lock status LED turns from blue to green with blink and the buzzer sounds three times. When green of the lock status LED keeps on, then you can lift the handle and open the lock. (For the setting of finger print authority, please refer to "Programming instructions") 3.
(two-factor authentication) Delete all users Change Programming Password Long press 1 Programming Password # 21 # Long press 1 Programming Password #90 New Programming Password # This operation deletes all users card and password. The programming password is 6 digits. If users forget the programming password, they can long press the reset button to restore the factory settings. 3.6.2 Card read programming 3.6.2.
4. 4.1 Controller instructions Functional diagram Reserved Connect Connect with antenna with IoT lock door sensor Program upgrade port position 4.2 Button to Indicator set lock light Ethernet Power interface Interface Wiring diagram yeekaco.com www.
4.3 Operating instructions 4.3.1 Controller configuration First, insert the interlock cable into the corresponding port of the controller successively, then insert the network cable into the Ethernet interface of the controller, and finally insert the power adapter connector into the power interface of the controller.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
