-2 Click button, click [Record Setup] or [System Setup] to enter the setup interface. Select "Record Setup" Select "System Setup" 2. Restart recording After completing the settings, follow the steps below to restart recording. When recording is restart, the recording icon display as "●". 2-1 Click the button to return to the video recording window.
Setting menu ■ Function of the buttons in the set up menu Button Function Mode Enter to the Menu window. Move to previous item. < > Move to next item. 1. Recording Settings Setting video recording mode.
Item Setting Introduction 1min( ★ ) Video Record Record Audio 2min Sets the single video's duration 3min ON( ★ ) Turn on/off the audio. OFF OFF Low G-Sensor Sets the sensor sensitivity. Medium( ★ ) High +2.0 +1.0 Exposure +0.0( ★ ) This setting refers to the amount of light that is taken in when shooting video. -1.0 -2.
Item Setting Introduction OFF( ★ ) Time-lapse recording 1 second Sets the time-lapse function 5 second 10 second Date/Time Logo Stamp number stamp Sets the stamp to be displayed in the window. Speed GPS 2. System Settings Check or change the common setting mode. ★ Default setting Item Settings Introduction Wi-Fi 2.4G( ★ ) Set the frequency band for the Wi-Fi Language / Set the display language.
Item Setting Format Reminder set up ON Time & Date Timezone Speed Unit OK / / Sets the date/time. ※ If GPS is used, the date and time will be calibration based on the timezone. ※ Click the date/time setting window to return to the previous item. Sets the GMT/Timezone. ※If you are not sure the timezone you're located, please google it or contact us. Sets the display speed unit. MPH 1 Minute 3 Minutes( ★ ) 5 Minutes Device Sound Format SD card ※ The locked video will be also delete.
Item Non-Use Auto Power Off Setting Introduction OFF Standby state for over the set time, the dash cam will shut down automatically. To turn on the power, press and hold the power button. 1min 3mins( ★ ) 5mins Default Settings / Restore the default settings. Reset Reset the dash cam when there is a problem with it.
How to use App 1.Download APP 1. Open "Google Play" 2. Search for "YeecoreViewer". 3.Follow the instructions to install (free of charge). 1. Open the "App Store" 2. Search for "YeecoreViewer". 3.Follow the instructions to install (free of charge). Android QR Code iPhone QR Code Scan the QR code and you can view the APP use introduction video on Youtube. Link: https://www.youtube.com/channel/ UCSv0mkwjhL3LgOTu4Gr9MAg If you have any questions please contact us at first. { s u p p o r t @ yeecore.
2.Connect your phone to the dash cam. 2-1 Click the Wi-Fi button. 2-2 Wait a few seconds to check the Wi-Fi information. 2-3 Connect your phone to the dash cam. Turn on your phone's WLAN and Select the YEECORE WiFi. Enter the password (PWA) and connect the network.
3.APP 3-1 Open the YeecoreViewer App. Click the YeecoreViewer Launch the dedicated app. 4. App Introduction ① ② ③ ④ ⑤ ⑥ ⑦ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ Click "JOIN CAM".
No ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ Item Introduction Back Back to the previous window. Resolution Display the resolution Recording time Displays the recording time of the video. Recording window Displays the recording image. Car License plate Displays the car license plate. GPS Display the latitude and longitude. Speed Display the driving speed. Front / Rear cam. Press the button to switch the camera display.
Playback Video 1.Display video playback mode. 1-1 Press the button to the video selection window. Press the button 1-2 Press the "Camera" button to switch between "Camera" and "Local.
1-3 Click the "Select" button to select the file you want to "Download" or "Delete".
Reading Files Videos and photos recorded by this dash cam can be handled by a computer in the same way as ordinary files. They can be playback and on computer that meets the following specifications. OS: Microsoft Windows 7, 8, 10CPU: Core2Duo equivalent, 2.0GHz or higher Memory: 2GB or higher Recommended playback software: Windows Media Player (Windows standard)*1 YeeCorePlayer (official viewer software)*2 *1: For Windows 7, please use the latest version (12.0.XXX).
1. Connect the dash cam to the PC. 1-1 Connect the dash cam to the PC. USB Cable 1-2 Open the SD card Folder and open the folder containing the file you want to play. ・Folder Name Normal Video ………… VIDEO Folder Emergency Video………EVENT Folder Snapshot………… PHOTO Folder 1-3 Double-Click the file You can play it with the Windows Media Player.
PC Tool 1. Preparing Please download the official player software from our website and install it. ※ Please refer to our website for installation instructions: https://www.yeecore.biz/Support/ ※ If you accidentally delete the viewer software, or if it no longer works properly due to an OS or system update, please download the latest version of the player software from our website. 2. Turn on the official player 2-1 Click the [YeecorePlayer] icon on the desktop. The YeecorePlayer will start. 3.
3-2 Click the Icon Click 3-3 Select the connected SD card, and then click [OK]. 3-4 Double click the video ・Folder Name Normal Video…………VIDEO Folder Emergency Video………EVENT Folder Snapshot…………PHOTO Folder ※ When you select an SD card, all the data will be loaded and displayed in the dedicated viewer software as one group of files from the start of recording to the end of recording. ※ If you select one folder, only the data in this folder will be loaded. The video will be played. 4.
Official Video Player With the Official Video Player, you can play back videos and display your vehicle's position, route, speed and time. ※ Please refer to our website for installation instructions: https://www.yeecore.biz/Support/download.php?class2=120 ※ Internet connection is required to display the vehicle's GPS information. 1.
No ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ Item Video display Video Time Next Introduction Video display window The duration of the past video Play next video Play/stop Play/stop the video. Previous Replay previous video Video Duration the total video duration. GPS Speed Displays the latitude and longitude. Display the driving speed. Recording time Displays the recording time of the video. Timeline It can be played from the clicked position.
No Item ⑪ Map Display Window Introduction The loaded video is linked to OpenStreeMap and your vehicle's position will move. If you are not connected to the Internet, the map (OpenStree Map) will not be displayed. Playback speed You can change the playback speed. ⑫ Enlarge the video Enlarge the video window. Adjusting the volume Display window ⑬ ⑭ Playlist order You can adjust the volume of the playback audio. Press the button to switch between full-screen and inplayer display of the video.
Frequent Q&A I can't record any video ■ Is the SD card inserted correctly? When the SD card is not inserted or there is an error, or "Please insert SD card" is displayed. When the SD card is abnormal, video cannot be recorded. Please format the SD card in this unit. If the message appears frequently, replace it with a new SD card. ■ Is the SD card full of protected files? Protected files cannot be overwritten. You can delete all recorded files by unprotecting or formatting the SD card.
It is difficult for this product to acquire GPS information ■ GPS reception signal will be affected. Some car navigation GPS antennas may affect the GPS reception of this product. Install the product as far away from the antenna as possible. It is difficult for this product to acquire GPS information ■ GPS reception signal will be affected. Some car navigation GPS antennas may affect the GPS reception of this product. Install the product as far away from the antenna as possible.
Specifications Voltage Power Rating Pixels FOV Screen Resolution Video duration Storage Format FPS Temperature range Wi-Fi GPS Audio G-Sensor USB port DC5V 5W 8M pixels Front: 139° Rear: 131° 2.45 inch full color LCD Front(WDR): 2K(30FPS): 1080P(30FPS) Rear(HDR): 2K(30FPS):1080P(30FPS) 1 min/2 min/3 min Micro SD card: not include MP4(Video)/JPG(Photo) 30 frame per second -14°F ~ 158°F Built-in 2.
Security Tips Please observe the following safety precautions Warning Don't attempt to disassemble or repair the device or its accessories unless servicing is carried out by profession personnel. Non-compliance action may result in electric shock or malfunction. Leave all internal checks, adjustments and repairs to your dealer.
Please keep the SD card and other accessories out of the reach of children to prevent accidental ingestion. Don't use this product in places where its use is prohibited,such as hospitals and on aircraft. This may result in the failure of lectronice quipment or other components and ause serious accidents. Don't use the unit in environments with high levels of flammable gases. It may result in an explosion or fire. Warning Don't operate the unit when hands are wet. It may cause electric shock.
Warning Attention: Different states have different laws regarding the installation of dash cams. In general, a dash cam is considered an obstruction if it occupies more than 5 inches on the driver's side or 7 inches on the passenger's side. This can result in you being ticketed (or worse, having an accident) Don't install or wire the device near the airbag. In the accident, the airbag may blow up and cause an accident or injury. In addition, the cord may obstruct airbag function.
Warning If your vehicle is equipped with a continuous power supply cigarette lighter out let that provides a supply of energy even when the engine is turned off,unplug the cigarette lighter. When unplugging the cigarette plug cord, do not pull the power cord. This could damage the cord and cause an electric shock or short circuit, which could result in a fire. Always unplug the cord without holding it.
Precautions for Use ●We are not responsible for any personal violations. Please keep driving safely. ●We are not responsible for any incidental damage to the vehicle or on-board equipment due to the incorrect installation of dash cam. ·· We are not responsible for any damage caused by natural disasters, fire, other accidents, intentional or negligent acts of the customer, or modification of the product.
■ Precautions for GPS ■ Precautions for Installation · When using this unit for the first time, it may take more than 2 minutes for completing GPS positioning. · Install this unit correctly according to the instruction manual. · Don't install products with GPS functions or VICS receivers near this unit. It may ause malfunction. · If the windshield is tinted with metallic film or glass with low radio wave transmission (such as insulating glass with metal coating), GPS positioning may not be possible.
However, when data is repeatedly recorded, the location of the bad sectors cannot be determined and the apparent recordable area decreases. However, if data is repeatedly recorded, the location of bad sectors cannot be determined and the apparent storage space decreases. braking suddenly to check the operation of this unit. · In order to record images properly, lways keep the camera lens and the windshield of the vehicle clean. · The number of frames recorded may vary depending on the recording conditions.
What should I do if there is an acciden? In the event of an accident, be sure to remove the SD card and store it in a safe place to prevent the event videos being overwritten. ※ It can be used as reference material in the event of an accident. It is not guaranteed to be effective as evidence of an accident. ■ What if the cigarette plug cord is connected? How to store the SD card in the event of an accident while the supplied cigarette plug cord is connected? 1 Cut down the power.
2 3 4 Unplug the power cord from the front cam USB port Power LED USB Port After the power is turned off, check that the power indicator is off for at least 3 seconds. Push the SD card in, let it pop out a little, then pull it out. ※Please be careful not to lose the SD card when it pops out. ※ Be careful not to drop the SD card from your hand when removing it; it is small and can get stuck between the seats if dropped in the car.
Warranty 1.During the warranty period (one year from the date of purchase), the product will be repaired free of charge if it should fail under normal use. If you wish to have the product repaired during the warranty period, please take the product and the warranty card to your dealer for repair. 3. In the following cases, the product cannot be repaired free of charge even within the warranty period.
Warranty Warranty Period 12 months from purchase Product name Dash Cam D12 Purchase Date Customer Year Month Date Your name: Phone Number: Address: Store Name: Issue information log Made in China 67
Twitter Contact Scan the QR code within 7 days of purchase.
MAX 18 MONTHS WARRANTY Brand Guarantee Extended Warrant Warranty Time 12 Months + 6 Months=18 Months Scan the QR code and complete a simple product questionnaire to help us improve our product development. And you will get a free 6-months warranty extension. Link: https://www.questionpro.com/t/AUY5NZsBB6 We'll inform you the warranty extensionby email in 3 days. [support@yeecore.biz] How to contact the support team? We offer a 12 Months warranty from the date of purchase.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.