Integrated Dash Cam D12 User Manual For 12v cars only The device can be used with the official PC player and get more features. Please download it from our website (https://www.yeecore.biz/). Warnings ・In the accident, be sure to turn the power off and remove the SD card before storing it to avoid overwriting the recorded files. ・Please don't insert or remove the SD card while the power is on. Otherwise, this may cause damage to the SD card.
Twitter Contact Scan the QR code within 7 days of purchase.
https://www.questionpro.
Content Note.................................................................................................... 1 Package Includes ............................................................................... 2 Product Details ................................................................................... 3 Installation .......................................................................................... 8 How to use dash cam.......................................................................
Note 1.Please format Micro SD card on the camera before initial use, and choose the high speed brand card. (Class 10/U3 or above) 2.Make sure the power to the machine is off when inserting and removing the SD card. 3.Parking Surveillance Mode must be activated with Smart Hardwire Kit.(Not include) 4.If the car starts, the dash cam is in a black screen, not working properly, please manually long press the "power " button, dash cam will turn on and work. 5.
Package Includes ■Please make sure that the following items are included in the package. ② Mount × 1 ① Front Cam× 1 ④ Rear Cam× 1 ③ USB Cable× 1 ⑥ Crowbar× 1 ⑤ Rear Cable× 1 ⑦ Clip×6 ⑨ Cigarette Charger Cable× 1 (Approx 11.
Product Details ■ Front Cam Connection Port Connect with the mount. Front Lens A protective film is attached to the lens when you purchase it. Please remove it when you are the first time to use it. Speaker Where the sound of the recording file is output. Back Power LED (Blue) Turn on wifi red long light Normal operation status slow flashing blue. 2.45-inch full-color LCD Screen HD display of recorded. Top Power button Turns the power on/of.
Bottom Microphone Record sounds from the surround. Left Right Micro SD insert Port (The SD card in not include in the package) Button Switching screen Click button to switch front/rear camera display. MODE The button appears only after playback has been paused. Press in none recording to display the "File Management", "Video", and "Settings" selection screens. Mic button WiFi button Turn on the WiFi. Emergency recording Click to make an emergency recording, the video will be locked.
Optional Accessory ■ Hardwire Kit A21 (approx 16.5 ft) By connecting the car battery directly from the vehicle's ACC line, the dash cam can be in powered without using the car's cigarette charger port in parking monitoring function. ※ The hardwire kit (A21) with 5V converter (buy extra ASIN B09DSK58MW) is necessary to activate the parking monitor.
Remove/Insert the SD card In this manual, "Micro SD card" is referred to as "SD card" unless otherwise noted. ※This dash cam supports micro SD cards of 8 GB or more and 256 GB or less. (SD write speed U3 or higher) Warnings ・After turning the power off, make sure that the power indicator LED (Red) is off for at least 3 seconds before the next process. ・The SD card can only be inserted in one direction. Insert the SD card as shown in the figure below. Pushing the card in forcibly may damage the dash cam.
2. Install the SD card into the front cam. 2-1 Turn off the car's engine. After turning off the power, make sure that the power LED is off for at least 3 seconds. 2-1 Insert the SD card. Push the card into the SD card slot until you hear a "click" sound.
Installation 1.Determine the mounting position 1-1 Determine the position where the mount is attached to the windshield. ※Note: Please refer to the recommended mounting position for the main unit installation location. ●Location of the Front Cam Different states have different laws regarding the installation of dash cams. In general, a dash cam is considered an obstruction if it occupies more than 5 inches on the driver's side or 7 inches on the passenger's side.
2.Use the mount to predict the position of the front cam to be installed(Attach the electrostatic adhesive film) 2-1 Wipe the windshield clean.(To avoid that the video quality is affected by dirty) Wipe the windshield clean of dirt and grease with a commercially available cleaning cloth. ※If there is dirt or dust on the windshield, or if the electrostatic adh esive film is repeatedly removed, the adsorption strength may decrease and the dash cam may fall while driving.
3. Attach the front cam to the windshield 3-1 Combine the mount and the front cam. 3-2 Tear off the paper from the electrostatic film's another side. 3-3 Tear off the paper from the adhesive tape on the mount. 3-4 Attach the mount and front cam to the electrostatic film. ※ To strengthen the fixation, leave the mount for at least 24 hours after attaching it, and be careful not to pull or apply excessive force until the 3M adhesive tape is firmly attached.
3-5 Adjust the angle of mount so that the lens is level with the direction of vehicle travel. Tighten the nut to fix the dash cam. 4.Connect the front cam to the car 4-1 Connect the cigarette charger cable to the mount's Type-C port.
4-2 Plug the cigarette charger cable into the cigarette lighter port. 4-3 Turn on the car, check the video, and adjust the angle. ※Clean the cigarette lighter port. After connecting the front cam to the car, turn on the car and adjust the mount's angle based on the video. ※When installing the front cam, adjust the angle so that the direction of the lens is horizontal to the direction of travel of the car.
Installation of Wire 1.Install the power cable ※ Hide the cigarette charger cable. (use a crowbar to hide the charger cable) ※ Use the crowbar to fix and hide the rear cable at the seam of the car, and use the wire clip to fix the rear cable the rear windshield. 1-1 Install the power cable Please wire according to the overall wiring image shown in the image. ※If setting up the power cable is difficult, secure the cable with the clip.
Installation of Rear Cam ※If there is a film attached to the rear windshield. Simply cut off the film at the mounting position and attach the rear cam. ※Installation of the rear cam may be difficult depending on the vehicle model (such as vehicles with vertical rear doors). ※Please note that wiring the rear cam near the radio antenna may reduce the sensitivity of the radio. 1. Attach the electrostatic film 1-1 1-2 1-3 Wipe the rear windshield clean.
2. Mount the rear cam to the rear windshield. 2-1 Tear off the paper from the electrostatic film's another side. 2-3 Attach the 3M adhesive tape on the rear cam onto where the electrostatic film mark out, to make it stable. 2-2 Tear off the paper from the adhesive tape on the rear cam. ※Attention:Adjust the "YEECORE" logo on the rear cam to face you and make sure the "YEECORE" logo is not upside down. Otherwise, the rear image will be upside.
3-2 Connect the rear cable to the front cam. Plug the other end of the rear cable into the Type-C port of the front cam. Scan the QR code and you can view the installation video on Youtube. Link: https :// www . youtube .
How to use dash cam Procedure of Power ON to OFF After purchase, if you want to use the product with the default settings, follow the steps below. Power ON 3 Time Setup Restart recording 4 5 Voice recording Snapshots 7 8 Stop recording Power Off Start recording Stop recording 1 2 Manual recording 6 Language Setup 9 ※If the SD card used is inserted into this dash cam for the first time, be sure to format it at first. Failure to do so may result in poor recording or loss of recorded files.
1-2 Turn on the car's engine Recording The recording icon will appear as "●" (red). GPS Tracking of GPS information. ※While GPS information is acquired, the date and time will be adjusted automatically based on the timezone ※If the GPS fails to locate the device, this icon will be displayed. ・The time to start recording Depending on the condition of the dash cam, it may take from a few seconds to up to 15 seconds to start recording. Please check the status of the power LED before you start driving.
2. Stop recording 2-1 Press the button. Recording icon Stop recording be displayed as ※When recording is stopped, the recording icon be displayed as 3.
3-2 Click "Language". the < and > buttons to select the "Language", c l i c k 3-3 Click Save current selection. 4.Time Setup 4-1 Click the button and Select "System Setup".
4-2 Click【>】to select "Time&Date" and click Save current selection. Click【>】 to Select "Time&Date" 4-3 After setting the time & date click [√] s a v e c u r r e n t s e l e c t i o n . Click 【+】&【—】 seeting the time & date. C lick [√] save current selection. 5. Restart recording When recording is resumed, the recording mark appears as "●" 5-1 Click the button.
6. Manual locking video In normal recording mode, click emergency recording. 6-1 Click button, dash cam will open button. The "Warning" will light up, and a manual emergency recording file will be generated. ※ After the emergency recording file is accomplished, the recording automatically returns to normal. 7. Voice recording (Turn on/off Audio) Press button in recording to change the audio recording ON/OFF. You can also change the ON/OFF setting in the"Record Audio"section of the "Video".
8. Snapshot Pressing the power button while the recording is on will take a snapshot. 8-1 Press the power button Short press power button 9. Power off (stop recording) This unit will stop recording with the car off. 9-1 Turn off the vehicle's engine. Recording will stop and the power will be turned off. Long press the power button to turn off the dash cam.
Video Recording Mode In the video recording mode, the dash cam records video continuously. ④ ③ ⑥ ⑦ ⑧ ⑤ ① ② No. Status Introduction In recording, “●” is displayed. Rocrding is ① Recording ② Emergency recording In emergency recording ③ GPS Tracking GPS status ④ Video Time Display the duration of the current video recording. ⑤ Resolution Displays the resolution. stopped ⑥ Audio ⑦ Micro SD card ⑧ Speed is displayed. is displayed. Display the current recorded audio.
■ Function of the buttons in video recording mode Button Function Power Press the button in recording to take a snapshot. Mode OK WiFi When recording is stopped, press the button to access the menu page. 1.Pressing the button during recording will stop the recording. 2.When recording is stopped, press the button will start recording. 1.In recording, press the WiFi button to start the WiFi. 2.Wait 5 seconds after pressing the WiFi button.
Recording There are two recording methods: normal recording and emergency recording. Two ways to start emergency recording Power ON (Start normal recording) ② Press the mode button ① Detects collision Power OFF (Stop normal recording) or ■ Normal Recording Video Files 1M mal Accident Happens 1M 1M 1M 1M 1M Saved in a special folder named " EVENT".
1.Normal Recording The dash cam start recording the video from car on (ACC ON) to car stop (ACC OFF) to the SD card at all times. · Video Duration Each video is saved in "1 minute / 2 minutes / 3 minutes“ 2.Emergency Recording When the emergency recording starts, there will be a warning. Video Duration: Video is saved in "1 minute". Displays the lock icon. ■G-Sensor When the G-sensor detects a shock above a certain level, it will lock the video and save in the "EVENT" folder of the SD card.
Default Setting The default set up of the dash cam are shown in the table below. Item Default Description Resolution 2K&1440P Video Duration 1 min Audio Recording ON G-sensor Middle G-sensor Sensitivity. Screensaver 3 min When the video is being recorded and no operation is performed for up to 3 minutes, the screen will automatically go off. (Recording proceeds normally) Exposure +0.0 Determines the amount of light that will be captured when shooting video.
Playback 1.Playback the video 1-1 Confirm that the dash cam is turned on, and if recording is in progress, press the button to stop recording. 1-2 Press the Mode button Press the button, select "Playback Menu", and then click on the option according to the type to go to the replay page. Select "All". 2. Playing back videos on the dash cam 2-1 Click【>】to slide through the pages to select the video you want to play. Displays the video selection screen. 29 The video selection screen.
2 -2 Select the video you want to play and press the button. Click the button - select the file you want to play - click the rig ht interface to enter the playback interface - click . Playback the videos. ※ Videos are recorded in single 1-min files. ※ If the video has ended, it will return to where it started. ※ Files that are protected will be displayed as 3.
Video playback mode In video playback mode, you can playback recorded files on the front cam. ② ④ ① ③ ⑦ ⑥ No. Item ① Video Name ② Emergency video ③ Video Duration ④ Total number of files ⑤ Introduction Videos named with the time and number, help to find the video. Files that are protected will be displayed as Displays the length of the currently playing recording file. The number of the playing file. Displays the status of the operation as an icon.
■ Function of the buttons in video playback mode Button Action Function Preview window / Playing window / Mode Preview window Enter File operations window Playing window Enter File operations window Back Preview window Back to Files window Playing window Back to Files window Preview window Enter playback file directory Playing window Enter playback file directory Preview window Moves to the next video Playing window Faster playback, X2/X4/X8 Playing/Preview Play/Pasue the video Po
1-2 Select the "Playback Menu" and open the Event. Select "Playback" and press the "Event" 1-3 play.Or click on the Click【>】to slide through the pages to select the video you want to to find the video by filename. Click and Select the video then click the Image 2.Unlock and Delete 2-1 Click the button, select the [Unprotect] to unlock the current locked file.
2-2 Click the button, select the [Delete File] to delete the current file. Set up 1. Display the setting menu. 1-1 Click the button.