Smart Media Phone SIP-T58V & SIP-T58A SIP-T58V Quick Start Guide (V80.10) www.yealink.com Applies to firmware version 58.80.0.10 or later.
Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. IP Phone Handset Handset Cord Ethernet Cable (2m CAT5E FTP cable) Quick Start Guide Power Adapter (Optional) Stand CAM50 Wall Mount Bracket (Optional) Note: The Yealink USB camera CAM50 is an optional accessory for the SIP-T58A IP phone. We recommend that you use the accessories provided or approved by Yealink.
. Attach the optional wall mount bracket, as shown below: PC Internet DC5V PUSH PC Internet DC5V Note: The hookswitch tab has a lip which allows the handset to stay on-hook when the IP phone is mounted vertically. For more information, refer to Yealink Wall Mount Quick Installation Guide for Yealink IP Phones. 4. Connect the handset and optional headset, as shown below: PC Internet PC DC5V Internet DC5V Note: The headset should be purchased separately. 5.
6. Connect the AC power or PoE, as shown below: Power Adapter (DC 5V) PC Internet PC Internet DC5V A AC Power Option PC Internet DC5V DC5V B PoE ( Power over Ethernet ) Option IEEE 802.3af compliant PoE Hub/Switch Note: The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may cause the damage to the phone. 7. Connect to the network, as shown below: You have two options for network connection.
Hardware Component Instructions 14 18 14 17 11 14 16 2 2 33 14 15 14 13 4 8 5 9 6 10 7 11 1212 19 PC Item Internet DC5V Item Item 8 TRANSFER Key 15 Hookswitch 9 HOLD Key 16 Camera Lens 10 MESSAGE Key 17 Camera Indicator LED HEADSET Key 11 Volume Key 18 Shutter Switch 5 MUTE Key 12 Keypad 19 USB2.
Startup After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via web user interface or phone user interface. Welcome Initializing... Please wait Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Swipe down from the top of the screen to enter the control center. 2.
Register status icons on the touch screen: (Gray) Register Failed (Green) Registered (Green and Flashing) Registering Note: Check with your system administrator if any error appears during the registration process or a specific configuration is required for your registration. Configuring via phone user interface Network Settings: 1. Swipe down from the top of the screen to enter the control center. 2. Tap Settings->Advanced (default password: admin)->Network->WAN Port/VLAN /Webserver Type/802.
Using the Touch Screen By default, the IP phone supports three idle screens. The home screen displays as below: Status Bar Phone Dialer Digital Clock Widget Directory Tap to add DSS keys. History Android Keys Screen Indicator To navigate the touch screen: Swipe left or right to switch among different idle screens. Tap to go back to the previous screen. Tap to return to the idle screen. Tap to view and manage recently used applications. To change the wallpaper: 1.
Entering and Updating Data To use onscreen keyboard: 1.Tap the input field, the onscreen keyboard will display on the touch screen: Tap to backspace. Label automatically to identify the context-sensitive features. Tap Next to go to next field. Tap Done to confirm the settings. Tap Send to dial out the number. Tap Go to browse the web page. Tap to switch to the uppercase input mode. Tap to switch to the numeric&symbolic input mode.
Ending a Video/Voice Call Using the handset: Hang up the handset or tap the EndCall soft key. Using the speakerphone: or tap the EndCall soft key. Press Using the headset: Tap the EndCall soft key. Redial Press to enter the Placed Calls list, and then tap the desired entry. Press twice when the phone is idle to dial out the last dialed number. Call Mute and Un-mute Press to mute the microphone during a call. Press again to un-mute the call.
Call Conference 1. Tap the Conference soft key during an active call. The call is placed on hold. 2. Enter the number of the second party, and then press or tap Conference. 3. Tap the Conference soft key again when the second party answers. All parties are now joined in the conference. 4. Tap the EndCall soft key to disconnect all parties. Note: You can split the conference call into two individual calls by tapping the Split soft key.
FCC Statement This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.