Media IP Phone SIP-T54S Quick Start Guide(V81.1) www.yealink.com Applies to firmware version 70.81.0.1 or later.
Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. Handset Cord IP Phone Handset Ethernet Cable (2m CAT5E FTP Cable) Quick Start Guide Power Adapter （Optional） Stand Wall Mount Bracket （Optional） Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Assembling the Phone 1.
. Connect the USB flash drive, as shown below: Note: The USB port can also be used to connect the Wi-Fi USB dongle WF40, color-screen expansion module EXP50 and USB headset. The Wi-Fi USB dongle WF40 and color-screen expansion module EXP50 should be purchased separately. For more information on how to use the WF40 and EXP50, refer to Yealink Wi-Fi USB Dongle WF40 User Guide and Yealink EXP50 User Guide. For more information on how to use USB headset, refer to the documentation from the manufacturer. 4.
Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press the OK key when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press the Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Basic Call Features Placing a Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone: . 1. With the handset on-hook, press 2. Enter the number, and then press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key.
If there is more than one call on hold, press Resume soft key. or to select the desired call, and then press or the Call Transfer You can transfer a call in the following ways: Blind Transfer 1. Press or the Transfer soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to. 3. Press or the Transfer soft key. Semi-Attended Transfer 1. Press or the Transfer soft key during an active call. The call is placed on hold. 2.
Voice Message Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red. To listen to voice messages: 1. Press or the Connect soft key. 2. Follow the voice prompts to listen to your voice messages. Customizing Your Phone Call History 1. Press the History soft key when the phone is idle, press or 2. Select an entry from the list, you can do the following: Press the Send soft key to call the entry.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Part 15 FCC Rules Any Changes or modifications not expressly approved by the party responsible for compliance could void the user,s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD. Add: 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, China Tel: 86-592-570-2000 Fax: 86-592-570-2455 Email: stonelu@yealink.
