Ultra-elegant Gigabit IP Phone SIP VP-T49G Quick Start Guide www.yealink.
Packaging Contents The following items are included in your package. If you find anying missing, contact your system administrator. Camera Stand IP Phone Handset Handset Cord Ethernet Cable Quick Start Guide Power Adapter Assembling the Phone 1. Attach the stand, as shown below: 40 2.Insert the camera, as shown below: Adjust Shutter Switch 1212 Adjust Camera Angle 3. Connect the handset and optional headset, as shown below: Note: The headset should be purchased separately.
4. Connect the power, as shown below: 5. Connect to the network, as shown below: You have two options for network connection. Your can select one of them according to the current office environment. a) Connect to the wired network b) Connect to the Wi-Fi network 1) Tap >Basic>Wi-Fi. 2) Tap On from the radio box of Wi-Fi. The phone scans available wireless networks automatically. 3) Select an available wireless network from the list of networks. 4) Enter pin code if required.
Startup After the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via web user interface or phone user interface. Configuring Your Phone Configuring via web user interface Accessing the web user interface: ->Status when the phone is idle to obtain the IP address of the phone. 1. Tap 2. Open a web browser on your computer, enter the IP address into the address bar (e.g.
Using Your Phone Status Icons The icons in the status bar at the top of the screen give information about phone: Status Icons What it means Shows that camera is not detected. Shows that the phone is connected to Wi-Fi network. Shows that network is unavailable. Shows that Bluetooth is turned on. Shows that the phone is locked. Shows that “Forward” is turned on. Shows that “Do Not Disturb” is turned on. Shows that “Auto Answer” is turned on. Shows that you have missed calls.
Basic Call Features Placing a Video/Voice Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone: 1. With the handset on-hook, press . 2. Enter the number, and then press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key. Answering a Video/Voice Call Using the handset: Pick up the handset. Using the speakerphone: Press .
Attended Transfer 1. Press or tap the Transfer soft key during a call. The call is placed on hold. 2. Enter the number you want to transfer to, and then press . 3. Press or tap the Transfer soft key when the second party answers. Call Forward To enable call forward: 1. When the phone is idle,tap ->Features->Call Forward. 2. Select the desired forward type: Always Forward----Incoming calls are forwarded unconditionally. Busy Forward----Incoming calls are forwarded when the phone is busy.
About us Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device been tested is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.The minimum distance from body to use the device is 20cm. Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes.