Ultra-elegant Gigabit IP Phone SIP-T46S Quick Start Guide (V81.1) www.yealink.com Applies to firmware version 28.81.254.62 or later.
Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. T46S IP Phone Handset Handset Cord Ethernet Cable Stand Quick Start Guide Power Adapter （Optional） Wall Mount Bracket （Optional） Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Assembling the Phone 1.
. Connect the USB flash driver, as shown below: 4. Connect the network and power, as shown below: You have two options for network and power connections. Your system administrator will advise you which one to use. PC Connection (Optional) Power Adapter (DC 5V) A AC Power Option B PoE ( Power over Ethernet ) Option PC Connection (Optional) IEEE 802.3af compliant PoE Hub/Switch Note: The IP phone should be used with Yealink original power adapter (5V/2A) only.
Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press the OK key when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press the Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Basic Call Features Placing a Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone: . 1. With the handset on-hook, press 2. Enter the number, and then press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key.
If there is more than one call on hold, press Resume soft key. or to select the desired call, and then press or the Call Transfer You can transfer a call in the following ways: Blind Transfer 1. Press or the Transfer soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to. 3. Press or the Transfer soft key. Semi-Attended Transfer 1. Press or the Transfer soft key during an active call. The call is placed on hold. 2.
Voice Message Message waiting indicator on the idle screen indicates that one or more voice messages are waiting at the message center. The power indicator LED slowly flashes red. To listen to voice messages: or the Connect soft key. 1. Press 2. Follow the voice prompts to listen to your voice messages. Customizing Your Phone Call History 1. Press the History soft key when the phone is idle, press or 2. Select an entry from the list, you can do the following: Press the Send soft key to call the entry.
About us Founded in 2001, Yealink, a leading provider of VoIP Phone and IP communication solutions, has been focusing on VoIP products characterized by reliable quality, easy deployment and affordable price for more than a decade. Today, customers from over 140 countries rely on Yealink as the backbone of global collaboration to extend the value of network communications.
FCC Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
