RoomPanel Quick Start Guide (V1.
1 Package Contents RoomPanel USB-C Port Protective Cover Screwdriver Quick Start Guide Power Adapter Power Extension Cable (Optional) Metal Bracket Security Latch 0° Mounting Bracket 20° Mounting Bracket Mounting Bracket and Accessories Kit 6-32 x 3/4 in × 6 (For mounting U.S. metal bracket) M3.5 x 25mm × 4 (For mounting U.K.
2 Power on the RoomPanel AC Power Option: 3 Installation Option 1: Mount on the the Electrical Box The RoomPanel installs over a standard 2-gang U.S.electrical box. Step1: Install the Metal Bracket 2-gang U.S.electrical box Metal Bracket Screws: 6-32 x 3/4 in Keep the 2 facing up.
Step2: Install the Security Latch (Optional) Install the security latch to the RoomPanel so that it cannot be easily removed from the mounting bracket after installation. RoomPanel Security Latch Step3: Install the RoomPanel Option2: Mount on the Wall This guide mainly takes 0° Mounting Bracket as an example for reference. Step1: Install the Mounting Bracket to the Wall Screws: T4 x 6mm Screws: M3 x 6mm Keep the facing up.
Step2: Route the Ethernet Cable Option 1 Option 2 Step3: Install the Metal Bracket to the Mounting Bracket Screws: M3 x 6mm Keep the facing up. Step4: Install the Security Latch (Optional) Install the security latch to the RoomPanel so that it cannot be easily removed from the mounting bracket after installation.
Step5: Connect the Cable and Install the RoomPanel Option 2: Mount on the Glass Step1: Gule the Mounting Bracket to the Glass 3M Velcro Glass Keep the facing up.
Step3: Install the Metal Bracket to the Mounting Bracket Screws: M3 x 6mm Keep the facing up. Step4: Install the Security Latch (Optional) Install the security latch to the RoomPanel so that it cannot be easily removed from the mounting bracket after installation.
4 Remove the RoomPanel 1. You can directly pull the RoomPanel to disengage the mounting bracket if the security latch has not be installed. 2. If the security latch has be installed: a. Pull the RoomPanel away from the wall until it stops. b. Use the screwdriver to rotate the latch to the opening position which retracts the security latch arms. c. Pull the RoomPanel to disengage it from the mounting bracket with the arms retracted.
Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Regulatory Notices Operating Ambient Temperatures • Operating temperature: +14 to 122°F (-10 to 50°C) • Relative humidity: 5% to 90%, noncondensing • Storage temperature: -22 to +160°F (-30 to +70°C) Warranty Our product warranty is limited only to the unit itself, when used normally in accordance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party.
