FCC Notice The Young Design, Inc. wireless Ethernet equipment described herein complies with FCC radiation exposure limits set forth for an uncontrolled environment when installed as directed. The equipment should be installed and operated as fix-mounted antennas such that the main lobe(s) of these antennas are located a minimum of 2 meters between the antenna and all persons during normal operation. This device complies with Part 15 of the FCC rules.
Flat Panel Antenna with Wireless Ethernet Adapter 1.1 Description The YDI Ether-Ant described in this manual is an 18dBi gain flat panel directional antenna with a built-in wireless Ethernet adapter. The equipment is 802.11b WiFiTM compliant. The antenna provides outdoor highspeed wireless connectivity for desktop PCs, laptop computers and routers equipped with a 10BaseT Ethernet port. The antenna offers the simplest, most efficient 2.
The Radio settings initialize the antenna’s built-in radio and configure the new device to join a designated wireless network. The Network settings connect the new device to the existing Ethernet LAN. The subnet and IP addresses of the network the user intends to connect to are required for this configuration. 1.4 Installation FCC NOTICE: This antenna/transmitter device must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons.