Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 Installation Manual – Smart Office This installation manual describes how to install Yanzi IoT infrastructure and sensors in smart offices.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 Table of Contents 1. 2. Introduction ........................................................................................................................................... 3 1.1 Best Technology ........................................................................................................................... 3 1.2 Easiest to install .................................................................................................................
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 1. Introduction Yanzi Networks delivers an end-to-end, horizontal, and all-IP software Internet of Things platform. We offer sensors, gateways, and Cirrus, a cloud platform solution packaged into a Software as a Service solution (SaaS) for Smart Building applications. The horizontal and all-IP approach provides a solution that is fast, robust, and transformative. 1.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 2. Installation Planning 2.1 Infrastructure The infrastructure has two parts: The Gateway and the IoT network. The Gateway is the brains of the system and manage all sensors, collects all data, and keeps a communication channel open to the Cloud. The IoT network is required to enable sensors to communicate with the Gateway. The IoT network is completely built on IP communication, same as on the Internet.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 Partner Cloud Servers Partner Cloud Servers 3G/ 4G/ LTE 3G/ 4G/ LTE Customer Firewall or Mobile Broadband Router Yanzi IoT Gateway 4G Yanzi Sensors Yanzi IoT Gateway Yanzi Sensors Large system reusing Ethernet infrastructure in building and where Internet connectivity can be provided by sharing a port on the existing firewall or using an external mobile broadband router.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 • Optional UPS on PoE switch and Gateway to enable operation when power is lost Large system completely stand-alone without using any existing infrastructure. Secure Cirrus API Partner Cloud Servers Cloud Servers 3G/ 4G/ LTE Yanzi IoT Gateway 3G/ 4G Yanzi Sensors Yanzi Networks IPv6 over IEEE 802.15.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 2.2 Use Cases Depending on which use case to cover, the type and position of sensors may vary. Two typical use cases are shown below for space utilization and comfortability. 2.2.1 Space Utilization For space utilization, Yanzi Motion/Presence sensors are added under the table at each work desk chair and at each chair of larger conference rooms (typically rooms with 6 chairs or more) to detect usage.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 % " & "# & # "$& " "& " ! ( ) % *& & "# & # "$& !!# & " ! ( " # #!) ' ! ! !' " ! ! !" ! 2.3 Installation Tool One of the important parts after the installation is to know where sensors have been placed.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 3. Installation of Infrastructure Gateways are recommended to be peered prior to installation. Peering means connecting the Gateway to a specific account. Users can then be added or removed from this account to control access. Peering is done using the installation tool or provided as remote support by Yanzi.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 4. Teams and Equipment Most efficient is usually to have installer teams of 2-3 persons. Multiple teams can work in parallel for quicker sensor installations. 1 person places the sensor on the floor map and scans the QR code. 1-2 persons place the sensor on the correct spot in the building.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 5. Sensor Handling Tips 5.1 Battery lid To open and close the battery lid, gently push the back side label close to the battery lid with your thumb and slide the battery lid downwards with your other hand. 5.2 Sensor element The sensor elements must be handled with care as these are sensitive parts. 5.3 Battery insertion The battery powered sensors operate with 4 batteries, note the polarity when inserting the batteries.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 6.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 7. Installation of Sensors Sensors are installed using the Yanzi installation tool. Make sure you get login credentials from Yanzi prior to installation and that the floorplan of the building has been added to the account. 7.1 Start Yanzi Installation tool 1) Using a Chrome browser, go to the link specified by Yanzi, typically something like https://cirrus5.yanzi.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 8. Wireless For high speed devices, Ethernet and WiFi is the typical communication mediums used. For very low power devices such as battery driven devices, a sister protocol to WiFi is used that is called the IEEE 802.15.4. IEEE 802.15.4 has about the same range as WiFi and normally operates on the same ISM band, 2.4GHz. There are Sub-GHz solutions for IEEE 802.15.4 as well but for normal high density installations, it is not required for reach.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 9. Working with Sensors 9.1 LED Behavior All sensors have a dual color LED that can indicate green or orange. The typical LED behaviors are shown in the table below. Sensor LED State Description Note Off Power is off or sensor is in sleep All sensor turn the LED off a short while after power has been applied to avoid light pollution. A short press on the button turns the LED on to display status if sensor has power.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 10. Battery Requirements It is very important to follow these guidelines to avoid serious injuries. Bad handling of batteries may cause them to leak, potentially rapidly, creating a risk of injury as the internals of batteries are very corrosive. It is recommended to use Alkaline batteries in most use cases and Lithium (LiFeS2) for cold use cases. • Note the polarity of the batteries when inserting them.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 11. Post Installation Following the successful completion of the Yanzi smart building installation, we recommend you to send an internal email to all company team members informing them of the reasons for the installation. It is important is to explain the purpose of the installation and to clarify that no images, video, or sound is ever recorded and that their privacy is respected and maintained at all time.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 12. Troubleshooting Behavior Solution Note Gateway won't connect Ethernet-based gateways Yanzi IoT Gateway: 1. Ensure Ethernet cable is plugged in 2. Verify gateway is receiving power and is turned on Yanzi IoT Gateway Plus: 1. Ensure Ethernet cable is plugged in to the righthand port 2. Verify gateway is receiving power and is turned on. If using PoE, double-check your switch is providing power over Ethernet. Yanzi IoT Gateway Rack: 1.
Doc No: 890-03084 Date: 2017-02-13 Rev 02pa1 13. General Product Information The information below relates to the following products - Yanzi Climate, SWTH1-1230 - Yanzi Motion, MDW1-0201 - Yanzi Presence, MDW3-0180 - Yanzi Motion+, MDW3-0231 - Yanzi Comfort, SWAQ3-0372 These devices complies with part 15 of the FCC Rules.
