USB Audio Interface User Guide EN
Contents Contents Introduction 4 About this manual..................................................................................... 4 Notes regarding the use of this product........................................................ 5 Product features....................................................................................... 6 Accessories.. ............................................................................................ 7 Component names and functions 8 Front side.. ..........
Contents Audio settings for livestreaming................................................................ 32 Troubleshooting 33 Power-related.. ...................................................................................... 33 Audio/video-related................................................................................. 34 Restoring the factory default settings (factory reset)................................... 36 Firmware update..............................................................
Introduction > About this manual Introduction About this manual Thank you for purchasing this Yamaha product. The ZG01 is a game streaming mixer that can be used to mix the audio playback from a game or a voice chat and output the mix for use in livestreaming. How the manuals are organized The manuals that cover the ZG01 are listed below. ( ( ( Safety Guide (included with this product) Lists the safety-related points you need to be aware of when using this product.
Introduction > Notes regarding the use of this product Notes regarding the use of this product Please take note of the following points when using the ZG01. Protection of copyright ( ( Do not use this product for any purpose that may infringe upon the rights of any third party including copyrights, as established by law in each country or region. Yamaha bears no responsibility for any infringement upon third party rights that may occur as a result of using this product.
Introduction > Product features Product features The ZG01 offers the following features. n HDMI support for easy connection of gaming devices You can enjoy the audio of the game you’re playing, by connecting your gaming device that supports HDMI output to the ZG01 with an HDMI cable. This product features two HDMI input jacks, letting you easily connect two of your gaming devices.
Introduction > Accessories Accessories The following accessories are included with the ZG01. ( USB 2.0 cable (Type A-Type C), 1.5 m × 1 ( USB 2.0 cable (Type C-Type C), 1.
Component names and functions > Front side Component names and functions Front side The following explains the names and functions of each component on the front of this unit. a a b c d [MIC IN] jack Connect your mic here (3.5 mm mini-plug; plug-in power supported). NOTE Connect to the [MIC IN] jack on either the front or the rear panel. If a mic is connected to both jacks, the front [MIC IN] jack will be given priority. b [HEADPHONE] jack Connect your headphones here (3.5 mm stereo mini-plug).
Component names and functions > Rear panel Rear panel The following explains the names and functions of each component on the rear panel of this unit. a a b c d e f [5V DC] jack (USB Type-C™) Connect a USB power adapter (commercially available) here. Use a USB power adapter rated at 5 V DC output (1.5 A or greater). To operate using bus power To use this unit via bus power, connect the b [USB] jack to the USB Type-C port on your computer with the included USB 2.0 cable (Type-C to Type-C).
Component names and functions > Rear panel f [MIC IN] jack Connect a mic here (either XLR or a TRS phone jack). NOTE Connect to the [MIC IN] jack on either the front or the rear panel of this unit. If a mic is connected to both jacks, the front [MIC IN] jack will be given priority.
Component names and functions > Operating panel Operating panel The following explains the names and functions of each component on the operating panel. a h a b c i j d e k f g l Mic gain [M] knob Sets the base level of the mic input. b Phantom [48V] button/LED Switches the phantom power on/off. Hold down the button to toggle between on and off.
Component names and functions > Operating panel d HDMI mute [c] button Mutes the HDMI audio input. The button lights when the audio is muted. e Monitor select [b] button/LED Switches the output destination (headphones or speakers) of the monitor audio. The LED of the selected output lights up. WARNING ( f Adjust the volume of your connected devices before you change the output destination.
Connections > Basic connections Connections Basic connections This example shows how to make connections to enjoy voice chats while playing a game, by using a voice chat app for your computer. You can play the game’s audio using the ZG01, either from your home gaming device connected via HDMI or from your computer connected via USB. HDMI OUT HDMI IN USB 2.
Connections > Basic connections ( Headset (with analog connection) When using a headset that has a TRRS (4-conductor) stereo mini plug, you’ll need an audio cable that splits off into a mic plug and a headphones plug. Connecting ( Use an HDMI cable to connect the [HDMI 1] jack (or the [HDMI 2] jack) of the ZG01 from the HDMI output of your home gaming device. ( Use an HDMI cable to connect the [HDMI OUT] jack of the ZG01 to the HDMI input of your monitor/display. ( Use the USB 2.
Connections > Connection example: scenario #1 Connection example: scenario #1 This example shows how to make connections for livestreaming the broadcast commentary from a game while holding a voice chat. You’ll need a video capture device to stream video.
Connections > Connection example: scenario #1 ( USB cable (for connecting the video capture device) Connecting ( ( ( Use an HDMI cable to connect the [HDMI 1] jack (or the [HDMI 2] jack) of the ZG01 with the HDMI output of your gaming device. Use an HDMI cable to connect the [HDMI OUT] jack of the ZG01 to the HDMI input of your video capture device. Use an HDMI cable to connect the HDMI input of your monitor/display to the HDMI OUT jack of your video capture device.
Connections > Connection example: scenario #2 Connection example: scenario #2 This example shows how to make connections to enjoy voice chats while playing a game on your home gaming device, by using a voice chat app for your smartphone. By doing this, you won’t need to connect to a computer.
Connections > Connection example: scenario #2 ( Headset (with analog connection) When using a headset that has a TRRS (4-conductor) stereo mini plug, you’ll need an audio cable that splits off into a mic plug and a headphones plug. Connecting ( ( ( ( ( Use an HDMI cable to connect the [HDMI 1] jack (or the [HDMI 2] jack) of the ZG01 with the HDMI output of your gaming device. Use an HDMI cable to connect the [HDMI OUT] jack of the ZG01 to the HDMI input of your monitor/display.
Installing the dedicated software > About the “Yamaha ZG Controller” app Installing the dedicated software About the “Yamaha ZG Controller” app The “Yamaha ZG Controller” is an app that’s used to configure and control the ZG01. You can use this to adjust the mic and monitor audio on the ZG01, make settings for voice effects and game effects, update the firmware and so on.
Installing the dedicated software > About the “Yamaha ZG Controller” app Switching between languages You can switch between language used in the operating guide and in the tips (the guidance shown for the buttons and other controls) with the “LANGUAGE” parameter on the “SETTINGS (APPLICATION)” screen. The software language changes to English, Japanese or Chinese automatically when the software is first launched, based on the OS language settings. Related links ( ( “Installing the software (Windows)” (p.
Installing the dedicated software > Installing the software (Windows) Installing the software (Windows) This explains how to install the “TOOLS for ZG” software package on your Windows computer. “TOOLS for ZG” includes the “Yamaha ZG Controller” application and “Yamaha Steinberg USB Driver” driver. n Installing Follow the steps below to install. Connect the ZG01 to your Windows computer after the installation is finished. 1 Access the following website to download “TOOLS for ZG”. https://www.yamaha.
Installing the dedicated software > Installing the software (Mac) Installing the software (Mac) This explains how to install the “TOOLS for ZG” software on your Mac. “TOOLS for ZG” includes the “Yamaha ZG Controller” application, the “Yamaha Steinberg USB Driver” driver and the respective uninstallers. n Installing Follow the steps below to install. Connect the ZG01 to your Mac after the installation is finished. 1 Access the following website to download “TOOLS for ZG”. https://www.yamaha.
Making settings on the computer > Configuring the playback/recording device on the computer Making settings on the computer Configuring the playback/recording device on the computer After installing “TOOLS for ZG”, configure the settings for the playback/recording device (input and output device) on your computer. Playback/recording devices The ZG01 will recognize your computer as a playback and recording device, as follows.
Making settings on the computer > Configuring the playback/recording device on the computer NOTE The streaming audio outputs to the [HDMI OUT] jack by default. To output to the [USB] jack, set this in the STREAMING OUTPUT MIXER screen of Yamaha ZG Controller. A warning message will appear when this is set to the [USB] port. If this happens, you must carefully read the message and agree.
Making settings on the computer > Surround settings on the computer Surround settings on the computer To configure the audio on your Windows computer to play back in surround sound with the ZG01, edit the sound output settings on your computer. On the Mac, this is configured automatically by following the channel format of the application being used. Enabling 7.
Operations > Basic operations Operations Basic operations This explains the basic operations for holding a voice chat while playing back the audio from a game. This shows how to operate the unit when connected in the following way. HDMI OUT HDMI IN USB 2.
Operations > Basic operations 1 Before turning on the power, turn all of the following knobs all the way down: Mic gain [M], mic level (fader), voice chat level [v], game sound level [g] 2 Start up the computer. Install “TOOLS for ZG” on your computer beforehand. 3 Turn on the ZG01. Press the [z] (standby/on) button. NOTE To turn off the power (setting the unit to standby), hold down the [z] (standby/on) button for at least one second. 4 Select the HDMI input.
Operations > Basic operations 5 Select the audio monitor destination. Press the monitor select [b] button while checking the LED indicator. In this example, we’ve selected the headphones. 6 Adjust the input and output levels for the mic audio. Turn each knob to the positions shown in the figure. You’ll hear the sound coming through your headphones when you vocalize into your mic.
Operations > Basic operations 7 Adjust the volume of the voice chat and game. While the voice chat and gaming device audio is being input, set the voice chat level [v] knob and game sound level [g] knob to the center setting, and turn the [VOLUME] knob to adjust the overall volume. Next, use the voice chat level [v] knob and the game sound level [g] knob to adjust the volume balance for each.
Operations > Adding effects to the mic audio Adding effects to the mic audio You can add a variety of effects to the mic audio. The following types of effects are set by default for each mic effect button. You can adjust the parameters in detail for each effect from the MIC EFFECT screen of the “Yamaha ZG Controller” dedicated software. Button Function VOICE CHANGER 1 Changes the characteristics of the mic input audio. The default effect alters male voices to sound like female voices.
Operations > Adding effects to game and voice chat audio Adding effects to game and voice chat audio You can add a variety of effects to game audio and to voice chat audio. The following types of effects are set by default for each game effect button. On the GAME EFFECT screen in the Yamaha ZG Controller, you can edit the effects and adjust the detailed parameters. Button Function Engage-M Recommended for “Multiple battle” scenes. It suppresses the player's sound, and emphasizes the ambient sound.
Operations > Audio settings for livestreaming Audio settings for livestreaming Configure the livestreaming audio settings and set the output destination for the livestreaming audio in the “STREAMING OUTPUT MIXER” screen of “Yamaha ZG Controller”. 1 2 Launch the Yamaha ZG Controller app. 3 Set each of the INPUT parameters. Open the “STREAMING OUTPUT MIXER” screen. Adjust the volume for MIC (microphone audio), VOICE (voice chat audio) and GAME (game audio).
Troubleshooting > Power-related Troubleshooting Power-related The power does not turn on ( The USB power adapter or the power supply capacity from your computer may be insufficient. Use a USB power adapter rated at 5 V DC output (1.5 A or greater). To use the ZG01 via bus power, connect to the USB Type-CTM port on your computer with the included USB 2.0 cable (Type C-Type C). ( The computer’s power is off when supplying bus power. Turn on the computer.
Troubleshooting > Audio/video-related Audio/video-related The mic audio can’t be heard ( The mic volume is not set properly, Adjust the mic audio input level using the mic gain [M] knob while watching the “Yamaha ZG Controller” level meter (MIC LEVEL). Next, adjust the mic audio output level using the mic level (fader) while watching the level meter (OUT LEVEL). ( The mic is muted. Press the mic mute [m] button to unmute the mic.
Troubleshooting > Audio/video-related The audio is not being output for livestreaming. ( The audio for livestreaming is not set to the intended output destination (USB and HDMI). Use “Yamaha ZG Controller” to set the output destination for the livestreaming audio. Set the output destination on the “STREAMING OUTPUT MIXER.” screen. ( HDCP is enabled for gaming device or computers connected via HDMI.
Troubleshooting > Restoring the factory default settings (factory reset) Restoring the factory default settings (factory reset) To reinitialize the ZG01, use the “Yamaha ZG Controller”. Once you initialize this product, all settings will be returned to their factory defaults. We recommend that you use the software “BACKUP” function to back up the settings before initializing. 1 2 3 Launch the “Yamaha ZG Controller” app. Open the “SETTINGS (HARDWARE)” screen. Click “INITIALIZE”.
Troubleshooting > Firmware update Firmware update The firmware of the ZG01 may need to be updated as necessary to use added functionality and so on. See the Yamaha website for details on updating the firmware version. Update the firmware by operating the “Yamaha ZG Controller”. 1 2 3 Launch the “Yamaha ZG Controller” app. Open the “SETTINGS (HARDWARE)” screen. Click “INSTALL.” After clicking, operate by following the instructions in the software.
Appendix > About HDMI Appendix About HDMI The ZG01 supports HDMI signal input of up to 4K/60Hz (for audio: PCM 8 ch., 192 kHz/24-bit). ( The [HDMI OUT] jack and [USB] jack can be used for outputting livestreaming audio. Configure this in the “STREAMING OUTPUT MIXER” screen of the “Yamaha ZG Controller” dedicated software. The unit outputs to the [HDMI] jack by default. ( The audio that is output to the [HDMI OUT] jack is 2 ch., 48 kHz/24-bit fixed (video signal passes through).
Appendix > Trademarks Trademarks The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum. Windows and Windows 10 are trademarks or registered trademarks of Microsoft Corporation in the United States, Japan and other countries. Apple, Mac and macOS are trademarks of Apple Inc.
Appendix > General specifications General specifications ( USB port Audio format PCM 24-bit, 48 kHz HDMI 1, HDMI 2 jack Audio format PCM 24-bit, 192 kHz (Max.
Appendix > Block diagram Block diagram PC APP PC APP MIC IN AUX MIC SETTINGS MIC EFFECT Voice (Yamaha ZG01) (Win) Yamaha ZG01 Voice (Mac) USB MIC IN PC APP PC APP MIX (MONITOR) HEADPHONE MONITOR SETTINGS GAME EFFECT 3D CHAT SPACE AUX HEADPHONE Voice (Yamaha ZG01) (Win) Yamaha ZG01 Voice (Mac) Speaker (Yamaha ZG01) (Win) Yamaha ZG01 Game (Mac) MIC USB SPEAKER OUT VOICE PC APP PC APP PC APP Streaming (Yamaha ZG01) (Win) Yamaha ZG01 Game (Mac) MIX (STREAMING) HDMI1 USB GAME GAME EFFEC
Layout Folder: YMH_PDF_Manual_A5_PA Stylesheet Name: 01_YMH_PDF_Manual_A5_PA_En-Multi Stylesheet Version: 2022.04.13 Yamaha Pro Audio global website https://www.yamahaproaudio.com/ Yamaha Downloads https://download.yamaha.
