User Manual

MODE
SIGNAL LEVEL
CONFERENCE
SYSTEM
PA MICROPHONE
GAIN EQ
Operated via YVC-1000 Configurator
Operated via YVC-1000 Configurator
Operated on the
microphone
Operated on
the Control
unit or via
the PC/Mac
Operated
on the
Control unit
OUTPUT VOLUME
USB input
Bluetooth input
Audio input L
Microphone 1 - 5
USB output
Bluetooth output
Audio output L/R
External speaker L/R
a
b
c
d
e
b+c+d+e
a+c+d+e
a+b+d+e
YVC-1000 Block Diagram (Firmware Ver.3.00 or later)
MICROPHONE
or
LINE
Operated via
the PC/Mac
As of September 2019, 3rd edition
Audio input R
Built-in speaker L/R
MODE
SIGNAL LEVEL
CONFERENCE
SYSTEM
PA MICROPHONE
GAIN EQ
MICROPHONE
or
LINE
Microphone mute*
Speaker
selection
Speaker volume Speaker mute
Audio components can be selected by the "PA
MICROPHONE SOUND TO SPEAKER" checkbox
under "AUDIO IN" tab in "YVC-1000 Configurator".
ON : a+b+c+d
OFF : a+b+c
a+b+c+d
Operated via
the PC/Mac
Microphone
sensitivity
Microphone
mute*
Audio mixer
Operated via
the PC/Mac or the
Web Conference System
* The two microphone mutes are linked.
You can set whether to link the two microphone mutes or not on the YVC-1000 Configurator (Ver.1.09 or later) (linking is set by default).
When non-linking is selected, the system operates the same as with firmware Ver.2.09 to Ver.2.11 (page 2 of this document).