日本語 VIBRAPHONE English YV3030MS Français Deutsch 取扱説明書 Owner’s Manual Benutzerhandbuch Mode d’emploi Manual de instrucciones Manual do Proprietário 使用说明书 한국어 中文 Português Español 사용설명서 『安全上のご注意』(2ページ)を必ずお読みください。 Make sure to read the “PRECAUTIONS” on page 2. Lesen Sie unbedingt die "VORSICHTSMASSNAHMEN" auf Seite 2. Assurez-vous de lire “PRÉCAUTIONS D'USAGE” à la page 2. Asegúrese de leer "PRECAUCIONES" en la página 2. Certifique-se de ler "PRECAUÇÕES" na página 2.
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Do not disassemble Handling • Repairs or part replacement should not be attempted unless instructions are provided in the manual.
NOTICE INFORMATION To avoid the possibility of damage to the product, follow the notices below. Casters Handling Before playing the instrument, make sure the casters and legs are parallel. As the angle between the leg and the caster approaches at a right angle, a rattling sound is more likely to be generated from the caster when playing. • Do not strike the tone bars with glockenspiel mallets or any other solid objects. Doing so may dent or scratch the tone bars, altering their pitch.
Introduction Thank you for purchasing the Yamaha VIBRAPHONE YV3030MS. This vibraphone, can be used in school performances or playing by hobbyists. To get full use and performance enjoyment from this instrument, please read this owner’s manual carefully before using it. After you have read the manual, keep it in a safe and handy place for future reference. For handling a vibraphone variable-speed driver, refer to the manual bundled with the vibraphone variable-speed driver.
Part Names Tone bars (accidental tone) Tone bars (natural tone) Side frame Side frame Driver attachment Damper Gas spring Resonators (accidental tone) Right leg Gas spring Damper belt Slant stay Left leg Caster with stopper Resonators (natural tone) Pedal stay Damper pedal Caster with stopper Assembly When assembling the instrument, always use two or more people. CAUTION Assemble the instrument in a place where there is sufficient room. 1.
Assembly 3. Tighten the screws in this order: q slant stays, w 6. To prevent the pedal from moving uncontrollably, pedal stays. secure the damper by hooking the damper belt tip to the hook of the main unit. Damper belt 4. Set the main unit upside down. To prevent damage to the floor and the main unit, leave the main unit in the shipping package, or place a rug or soft cloth on the floor underneath the main unit. 7.
Assembly 10. Attach the resonators. 11. Insert the resonators from underneath the main unit and rest the high sound side and then the low sound side onto the resonator holders. NOTE Adjust the instrument height. Pulling the lever on the left and right leg raises the height, while firmly pressing down on the side frame while pulling the lever lowers the height. When you release the lever, the instrument height is fixed at that height.
Specifications Range Three octaves: F33–F69 Bars Aluminum alloy Height Adjustable From 66 cm to 85 cm Dimensions (W×D) 127 cm × 74 cm Weight 35 kg Included Accessories Drop cover, hex key Separately Sold Accessories Vibraphone variable-speed driver (YVD20) * The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website and download the manual file.
MEMO YV3030MS Owner’s Manual • 9
雅马哈乐器音响(中国)投资有限公司 上海市静安区新闸路1818号云和大厦2楼 客户服务热线:4000517700 公司网址:http://www.yamaha.com.