OWNER'S MANUAL
1 To assure the finest performance, please read this manual carefidly. Keep it in a sate place for future reference. 2 Install this sound system in a well ventilated, WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. cool, dry, clean place with at least 5 cm (2 in) of space above (or below) this unit away from direct sunlight, heat sources, vibration, dust, moisture, and/or cokt.
Overxiew Features Using ................................................................. .................................................................. this Supplied Controls manual .................................................. 2 3 5 accessories .............................................. and functions .......................................... 6 7 Front panel ................................................................ Front panel display ..........................................
It is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and installing a great number of speakers in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater. Yamaha YSP-600 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround sound.
Digital Sound Projector TM The Digital Sound Projector technology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surround sound, thus eliminates the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems. This unit also employs the beam modes that let you enjoy the surround sound (5 Beam, Stereo plus 3 Beam and 3 Beam), stereo playback, and My Beam.
lnte\liBeam The "lnte/liBeam Yamaha SRS(®) " logo and "IntelliBearn" are trademarks of Corporation. TruBass, SRS and the "(0) " symbol of SRS Labs, Inc. TruBass technology license fi'om SRS Labs, Inc. 0n! are registered is incorporated trademarks under DIGITAL Manufactured under "Dolby", "Pro Logic", of Dolby Laboratories. license from Dolby and the double-D EUPHONY Laboratories.
• This manual supplied describes owner's • Operations how to connect manual for each ill this manual use keys on the supplied • -"4"_'-indicates a tip for your • This is printed manual case of differences 1 this unit. For details regarding the operation of external components, refer to the remote control of this unit unless otherwise specified. operation. prior to production.
Check that you have received all of the following parts. Remote control STANDBWON (×1) IntelliBeam microphone (×1) Optical cable (×1) POWERPOWER _QQD _00_ AuTo VOLMODE SETUPIN_O_ SLEEP Cardboard microphone stand (×1) Digital audio pin cable (×1) SBEAM ST*S_EAr_ a_EAM SUR.
I iNPUT - VOLUME + STANDBY/ON 1 INTELLIBEAM MIC jack Connect the supplied IntelliBeam microphone for AUTO SETUP (see page 33). VOLUME +/Controls the volume level of all audio channels (see page 44). Front panel display Shows information about the operational status of this unit. Turns on the power of this unit or sets it to the standby mode (see page 28). Remote Receives control infrared sensor signals from the remote control. @ INPUT Press repeatedly page 42).
HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). MULTI indicator Lights up when this unit detects a multi channel digital audio signal (see page 43). @ SRS TruBass indicator Lights up when TruBass is turned on (see page 65). @ Volume level indicator Displays the current volume level. @ EQUAL indicator Lights up when the TV volume equal mode is selected (see page 54).
"1_'l_t-'Itlll'|l'lll'lffqlt d_ _, _ n OUT VCR DVD TV/STB IN SUBW_3FE_ ............ n' AUX VIDEO TV/STB AUX DVD OPTICAL _ DIGITAL COAXIAL SYSTEM CONNECTOR INPUT J @ HDMI OUT jack Connect to the HDMI input jack on your HDMI component such as a TV or a projector connected to this unit (see page 18). @ DVD Connect HDMI IN jack your DVD player via an HDMI connection (see page 18).
This section describes the functions of the remote control used to control this unit. Some buttons marked with an asterisk (*) share the common functions between the YSP and TV/AV operation modes (_). _%,._ You can also control other components using the remote control once you set the appropriate remote control codes. See "Controlling other components" on page 77 for details. Infrared window Outputs infrared control signals. Aim this window at the component you want to operate.
-'l';_;']t-'It II |' |I 'If I"I( I'll I" MACRO Use to set the TV macro (see page 80). SLEEP Sets the sleep timer (see page 55). @ INPUTMODE Toggles between input modes (AUTO, DTS, and ANALOG) (see page 73). Beam mode buttons Change the beam mode settings (see pages 45, 51, and 52). @ SUR. DECODE Selects the surround mode for playback (see page 48). MENU Displays the setup menu on your TV monitor (see pages 34 and 59). @ Operation mode selector Selects the operation mode of this unit.
This section describes the functions of the remote control used to control other components when the TV/AV mode is selected with the operation mode selector (@). @ Numeric buttons Enter numbers. @ Cursor buttons _ / _ /
This section describes a suitable installation location to install this unit using a rack. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.
• Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. T Example 3 Install this unit as close to the exact front of your normal listening position as possible.
• Install rack. Using a rack this unit under your TV II in a commercially available f This unit i Make sure that the rack is large ventilation strong ? space enough around to support enough to allow adequate this unit (see page the weight 13) and that it is of both this unit and your TV.
This unit is equipped with the following For audio input • 2 optical digital • • 1 coaxial digital input jack 2 sets of analog input jacks types of audio/video For audio/video input • 2 HDMI input jacks TV tuner, digital reinforced to 26. For audio output l subwoofer output jack For output • jack audio/video 1 HDMI output For video output • 1 analog output jack to connect external components air wave tuner, and game console.
"I'IIIIFP'Iff'III" i! lii!!i!!!!!!!!!!!!!l! • Cables used for connections • Audio L_'r'L_ It'_iVtL_ _I'_ O Information on HDMV M signals HDMI cable DVD video Dolby Digital, DTS, PCM 2-channel stereo DVD audio (up to 96 kHz/24 bit) Blu-ray Disc HD DVD Audio pin cable Dolby Digital, DTS, PCM (supplied) (White) __ (Red) (White) (Red) • When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of DVD player.
|_'l'll If I'i"I (I'11t: This unit is equipped jacks, use HDMI with 2 HDMI cables input jacks for simpler and 1 HDMI and easier connections, 21. If your TV has a built-in digital on your TV to the TV/STB OPTICAL satellite output jack. If your TV and other components and you can skip the connection tuner and an optical digital DIGITAL output jack, connect procedures the optical have HDMI from page 19 to digital output jack IN jack on this unit.
"I'IIIII'P'I(I'III" For audio connection, connect the analog unit. If your TV has an optical OPTICAL DIGITAL For video connection, for easy viewing If you make analog input at the TV/STB INPUT digital the optical digital output the video input jack on your TV to the VIDEO when you adjust OPTICAL jacks on your TV to the TV/STB jack, connect AUDIO INPUT jacks on this jack on your TV to the TV/STB jack on this unit.
|PI,IIIII:I,'I(I,IIt _ Connect the coaxial this unit. When digital your DVD/VCR combo audio connection. • Check that your output jack on your DVD playeffrecorder you connect DVD this unit to your DVD/VCR player/recorder playeffrecorder to the VCR AUDIO is properly to the DVD COAXIAL combo playeffrecorder, set to output INPUT Dolby Digital connect DIGITAL the analog jacks on this unit in addition and DTS digital settings of your DVD playeffrecorder.
"i'lllll:i"l(l'lll" Connect DIGITAL the optical INPUT digital tuner to the TV/STB This connection output jack on your digital jack on this unit. Connect AUDIO is not necessary INPUT if your satellite the analog tuner or cable audio output TV tuner to the TV/STB jacks on your digital satellite OPTICAL tuner or cable TV jacks on this unit. TV has a built-in digital satellite tuner o1"cable TV tuner Rear panel -- AUDII_INPUT-- a I-- (see "Connecting a TV" on page 19).
[_'l'll If I'i"I (I'11t: Connect digital the TV/STB AUDIO INPUT output jack on your digital to the analog audio connection. This connection is not necessary jacks on this unit to the analog airwave By doing tuner to the TV/STB audio output jacks OPTICAL so_ you can enjoy both analog if your TV has a built-in digital airwave tuner DIGITAL and digital a TV" on page 19). of this unit 4¸¸¸¸ SYSTEM L CONNECTOR PU I L Connect to the analog audio output jacks on the TV.
"i'll IfI:i"I(I'll I" To connect Connect a VCR, connect the analog red plugs to the right jacks audio output jacks on your VCR to the VCR AUDIO INPUT jacks on this unit. and white plugs to the left jacks.
|PI,IIIII:I,'I(I,IIi _ Rear panel of this unit 0®® ®®®®® VCR TVISTB -- AUDIO INPUT-- @ TV/STB AUX OPTICAL $UBWOOFER VIDEO -- OUT-- i DIGITAL DVD COAXIAL INPUT I digital Video signal to the TV game Optical cable 24 En | DVD player/recorder, console, CD player, etc.
"1'lllll:i"l(l'lll" Connect the monaural This connection subwoofer, input jack on your subwoofer alone does not output sound turn on the power of your subwoofer OUT in SUBWOOFER When connecting CONNECTOR mode of this unit controls jack on this unit. subwoofer. and then run AUTO To output SETUP sound from the connected (see page 32) or select SWFR for BASS SET (see page 64). a Yamaha terminal to the SUBWOOFER from the connected subwoofer equipped with a SYSTEM on this unit.
|PI,IIIII:I,'I(I,IIi _ Once all other connections are complete, plug the AC power supply cable into the AC wall outlet.
Remove the transparent sheet before using the remote control. ® Press and hold the _ mark on the battery cover and then open the cover. Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+1-). 3 CIosethe The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 ft) of this unit and point it toward the remote control sensor of this unit during operation. il ¸4¸¸¸¸ ( \
l_r=_tll,r, f_{={i_=_. 2 When Press STANDBY/ON the standby mode. this unit is ill the standby the front panel other control or on the remote buttons are not operational Press STANDBY/ON this unit. to turn on the power of The volume level appears in the front panel display, and the current input source and beam mode are displayed. STANDBY/ON or Remote Front panel control vc__ ! ! :": ! ! ! !'.4 _...... "." L." L. L." i'i i2, Current volume ::' :"5 ...) r:2.." level rOE !%!!!% L" ".
This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your own home. Check that the video input jack on your TV is connected to the VIDEO OUT jack on this unit to display the OSD of this unit. Press STANDBY/ON this unit. to turn on the power of 3 Turn on the power of your TV. The following screen appears on your TV.
The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See "Changing OSD language" on page 31. Run AUTO SETUP (IntelliBeam). See "AUTO SETUP (IntelliBeam)" on page 32. If an error occurs Look for a remedy. See "Error messages messages for AUTO and possible SETUP" on page 38 for a complete remedies. Play back audio signals or adjust the settings for the beam mode. See "Playback" on page 42, "Enjoying surround sound" on page 45.
This feature allows you to select the language of your choice that appears in SET MENU of this unit. Set the operation mode selector to YSP. 4 Press A / V to select the desired language, and press ENTER. Press MENU. The SET MENU screen appears on your TV. .,,'L,,,I Choices: ENGLISH (English), DEUTSCH (German), Frangais (French), ESPAIqOL (Spanish), ITALIANO (Italian), NEDERLANDS (Dutch), PyCCKHfI(Russian) I I_,,,iT_,,, ' + ,, PiEi'K)!;:Y ,, !::iL.ii 0 ',:ii;E rUP ,, i,ii::l!,,iiJi::lL.
This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.
ill_lP_'/:illl_tintmm:_€..,, The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.
W__ll/lge]F.']:ltll"JIFflt:_lH:f_./,,l Once the IntelliBeam microphone is firmly connected to this unit and properly placed in your listening room, follow the procedure below to start the AUTO SETUP procedure. You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP for more than two seconds. In this case, this unit performs both of the beam optimization and sound optimization procedures.
ilqlP_'i:ulll/'immm:_*.,,,, 3 • Make sure that your listening this unit is performing • To achieve your the best results listening completed beams. is as quiet SETUP possible, room until the AUTO as possible The SET MENU screen appears on your TV. while procedure. evacuate yourself from SETUP procedure is so that you may not obstruct q:T i,i;:i,,ii i the path of sound + ,,i,iEi,iOR9 ,,!::iU[0 !i;EFLiP ,,bii:ibli.Jl::iLSEiUF:' ,,[...
W,JlJlgOJF:]=ltlJ'.Jil_F_lll:f_./.l Press _ / v to select BEAM+SOUND Check the following points once again before starting the AUTO SETUP procedure. OPTIMZ, BEAM OPTIMZ only, or SOUND OPTIMZ only and then press ENTER. • Is the IntelliBeam microphone firmly connected to this unit? • Is the IntelliBeam microphone placed in a proper location? • Are there any large obstacles in between the IntelliBeam microphone and the walls in your listening room'? The following screen appears on your TV. '.
Check that the following screen is displayed on your TV. 9 The results of the AUTO SETUP procedure are displayed on your TV. Example Press ENTER to confirm the results or press RETURN to cancel the results. The following screen is displayed for two seconds and then disappears from your TV. 1 _:il..irO5!ErLil::'COHF:'LErE :::=iiUi,_,i i'::i::,i:,LiL, i MRA%Hv:RMEN T CCi[:IPL R[[I: "_ -- F'].e_::_i.e Pei,',:>..,e Flashes i:..he H:[C ',,::l,".ol,'t F:'O:i_i. :i.{:,.:i.
W_JI/lge]F.']:ltlPJifflt:_lH:f_./,,] • Error messages for AUTO SETUP Before the AUTO SETUP procedure starts See Error message Cause Remedy page ERROR E-2 No MIC detected. MIC connection Please check Tile IntelliBeam microphone connected to this unit. is not Connect tile IntelliBeam this unit. microphone to 33 and re-try. While the AUTO SETUP procedure is in progress If one of the errors listed below except E-I is displayed, press RETURN.
3 Press _- / _ to select MEMORY and press ENTER. The following screen appears on your TV. You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment. For example, if there are curtains in the path of sound beams, the effectiveness of the sound beams will vary depending on whether the curtains are open or closed.
Press _ / v to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. The following screen appears on your TV. 2)Mii}i0B,' !iiii::iUE You can recall the settings saved in "Saving settings" on page 39 according to the varying conditions of your listening environment. 1 Set the operation mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV. i'iEHOR'ii !ii;!E_b'e i'/o_,._i:' !ii;iii:T t"iiii:i,,il,,,i F:'bl;il.hillENiEI];;:] t :' !i;!E_b'e + ,,i:::i!iit??F:':_:' ...............
4 Press _ ENTER. / _ to select LOAD and press 6 Press ENTER again. The new parameters saved as MEMORY l, MEMORY2, or MEMORY3 are loaded. Once the parameters are loaded, the display returns to the SET MENU screen. The following screen appears on your TV. %:+ ,.* i)Miii:i'i0i;i:*,,,' -'> i'iiE:MOR"r :L HEi'iOR'r2 i'iEi'iOR"/5 [:,,Jr. :}.,'[:"_,] ',;5 e ], ec i,, i::ENiER :] ',;ii:nt,,er" .,,,,.,,, = i'ii::,i"iL,i -> ,,i'iEi'ioF:9 ,,!::iUro 'E;EruP ,,biFibli.
• You can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (STB, VCR, DVD, AUX, or TV) on the remote control. The name of the selected input source and the type of corresponding input mode appear in the front panel display. Front panel operations Press INPUT on the front panel repeatedly to toggle between TV/STB, VCR, DVD, and AUX.
Press VCR to play back a VCR. 2 If necessary, turn down sound is heard. VOL Ui2F;;: Switch to the video input on your TV using the remote control supplied with the TV and display the DVD menu screen. the volume of your TV until no = 3 Press DVD to select DVD as the input source. 4 Play back DVD on your DVD player using the supplied remote control. Audio signals from your DVD player are output from this unit.
lum,pN q ' • Muting the sound Press "AUDIO display, MUTE MUTE to mute the sound. ON" appears and the volume in the front panel level indicator flashes. MUTE € VOL Flashes Press VOLUME +/- to increase or decrease the volume level. The numeric value of the volume level appears in the front panel display. Control range: MIN (minimum), 01 to 99, MAX (maximum) VOLUME ',,,,!,- vo,uMEC_+ VOL ' ..J D i2, i'i i'i 2 =! Press MUTE again (or press VOLUME +/-) to resume the sound output.
You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. • When ANGLE TO WALL • To enjoy 5 Beam, the parameters Stereo best match OR CORNER plus 3 Beam, your listening is set ill MANUAL o1"3 Beam as the beam SETUP mode, (see page 60), 5 Beam you must perform and 3 Beam AUTO SETUP cannot on the remote be selected. o1"MANUAL SETUP so that environment.
_-_J_I-'I'IIi'I'IiPI-'I'I'IiI' ?_t.. You call achieve settings Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels. This mode is ideal for watching live recordings on a DVD. Vocals and instrumental sounds can be heard close to the center of the listening position while sound reflections from the venue itself can be heard on your right and left, giving you the feeling that you are sitting right in front of the stage.
mm qf/,_,/_,/,E-'t't'r'1" r'm'_'1 " *' • Decoder indicators Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: Status Indicator When PCM signals are being input PCM When Dolby Pro Logic is selected as the surround mode When Dolby Pro Logic II is selected as the surround mode DTS Neo:6 Dolby Pro Logic Dolby Pro Logic II When DTS digital signals are being input o1"DTS Neo:6 is selected as the surround mode When Dol
_-_J_l-'l'lli'l'lil'l-'l'l'lil' Press SUR. DECODE repeatedly (or press SUR. DECODE and then press <1/ _) to switch between surround modes. This unit can decode 2-channel sources for 5.1-channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. Choices: Neo:6 Cinema, Neo:6 Music, PRO LOGIC, PLII Movie, PLII Music, PLII Game Default setting: Neo:6 Cinema _-,-_ The beam mode must be set to 5 Beam, Stereo plus 3 Beam, or 3 Beam (see page 45). SUR.
mm qf 1,_,/_,/, E-'t't'r'1 'l' r' m'_'1'l' r' You can enjoy analog audio signals in real surround sound. Before performing the steps below, output 4 If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. 5 Press VOLUME +/- to adjust the volume level. from your TV set the volume of this unit to 30. VOLUME 6 Press SUR.
_-_J_l-'l'lli'l'lil'l-'l'l'lil' When Dolby Pro Logic II Music is selected PANORAMA Gives the front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect.
You can enjoy 2-channel stereo playback as the beam modes by pressing STEREO on the remote control. Sounds are output from the front right and left channels. This is ideal for playing back hi-fi sources, such as CDs, and can be used to replace • When your TV speakers. you play back decreases • When Dolby to the extreme, the stereo playback Digital audio use other beam is selected signals modes as the beam in the stereo except playback, the dynamic range becomes compressed.
You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night.
itK_-_i,'.a'r_:g..:,u,r,_g:'_r_p'l r_,_:I_.,,, You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP. Press MY BEAM. "MY BEAM" is displayed in the front panel display. Press <1/ ) while "MY BEAM" is displayed to adjust the beam angle.
The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e. due to commercials, etc.). The EQUAL indicator lights up in the front panel display when "TV EQUAL VOL" is selected. \ I / EQUAL m / I \ Lights up • Select NIGHT:CINEMA when watching films to reduce the dynamic range of film soundtracks and to make
Use this feature to automatically set this unit to the standby useful if you are going to sleep after a certain amount mode after a specified period of time. The sleep timer of time while this unit is still playing is back a source. Each time you press SLEEP, the front panel display changes as shown below. SLEEP € 1 •".7'.." "7"7'D ,:.7t;?,.._ .; _... ,.J_..,_..,L.,! _.J_:J!'l £ ! l 1 Set the operation mode selector to YSP.
• Canceling the sleep timer 1 Set the operation mode selector to YSP. Press SLEEP repeatedly until "SLEEP OFF" appears in the front panel display. SLEEP VOL 5 L E E F: 3 0 F'F' =, Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated. Disappears The previous settingfor the sleep timer before you deactivate it is stored ill the system memory. _%,.
You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI.
To achieve the best parameters, initial quality as well settings surround as to make (indicated sound, advanced in bold under you can settings for each use MANUAL sound parameter) SETUP signals, to reflect sound the to fine-tune beams, needs of the listening digital your own input, and listening environment the OSD. Change the environment.
,l++g|q'+++'l=ilq 3 Use the remote control to access and adjust Press _ / _ to select MANUAL SETUP and press ENTER. each The following screen appears on your TV. parameter. +,, ,' E,L + ivh"='llh"+i ="'r'","'iit'+ "HI"iViI,.IP'iL, X, i ijr -- :{)SOLII,4[)HEP.+L+ 2 )E:EI::IHMENI..+ ::!;)]:HF:'Lrr HE}.+U ,:{.)[)]: '.ISF:' L_:_'.,'ME]-41.J +i You call adjust the SET MENU parameters reproducing sound. 1 Set the operation mode i ++.,+++ while the unit is selector to YSP.
ANGLE TO WALL OR CORNER FLAT TO WALL Use to manually adjust the various the sound beam output. SET MENU + MANUAL parameters SETUP + related BEAM to MENU ',;'ii,,!i,,i,,ii4 f4i,,i,,ii i + F:I):!iliEri:[f..i(i_ F:'i::lRi:li,iEfER!ii; _,. _::,c _..h I i::l[).7i..i:iii; [ HEi'.if I:::::,:[Mi:::li:i_E LOCi::Ii :[Oi'.i Select FLAT TO WALL parallel [:,,k:]..']_,1]',;U!::' ,"[)o _,._lg i::EVir ER:]',;Ent..el....
,l#+gl%f@"l=Uel + Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit. • BEAM ADJUSTMENT (Beam adjustment) Use to manually adjust the various sound beam settings. We recommend that you select 5 Beam as the beam mode before adjusting these parameters (see page 45).
BEAM TRAVEL LENGTH (Beam travel length) A certain amount of delay must be applied to the sound from each channel so that all sounds can arrive at the listening position at the same time. This menu sets the distance reflected that sound beams travel after being output and off the wall until they arrive at the listening position channel.
,Iflg|%T+'/_iq TREBLE GAIN (Treble gain) Use to adjust the high-frequency channel. ff the reflection and right absorbent sound points of the front sound beams surfaces, left and right or surround are on curtain you call achieve by increasing the treble • IMAGE LOCATION (Image location) Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel.
BASS OUT (Bass out) Use to manually adjust the various the sound output. SET MENU --+ MANUAL SETUP parameters --+ SOUND related to MENU + _:i) i0biE C0biii;b3L B)S L.ii!i',!_.i 0 0 F:ER SEi C)i,iLii E LI.ilL*EL L))F!LiL)i0 [)ELFI'r_ E)[)[),'[)[S [:,:_r'_[_i,'d.c. R_E_n'i[k_i, F ::,[!"uB _E_;_I.:I_I. E.,k::i ..' ::"iCi:',U!_:',"[)oL,Jn [:::b.i El;: i En :..er" • TONE CONTROL (Tone control) You can adjust the tonal quality of sound beams. i::!)T()i,,iE [ i;;:EE',L.E .......... iih:i[?,_"_.,_.
,l#+g|%T@"l,=Uel + • AUDIO DELAY (Audio delay) Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors. Choices: 0 to 160 msec • TruBass Use to turn on or off the bass sound enhancer. The SRS TruBass technology improves bass even without a subwoofer and provides deeper, richer bass in the presence of a subwoofer. Choices: OFF, ON [:+::, i:tUi::+ ]:0[:+iii:Li:i+,, ,+ _:iLi[:,:[0 [:,EL i:;I%......... i:.*i,'t!_i.e c. [ ..
• INPUT TRIM (Input trim) Use to adjust the input level of the input source. Use to manually adjust the various the audio and video input. SET MENU --+ MANUAL SETUP parameters --+ INPUT related to i::i) j,i,,ii,,'t.ij ji,:i J,["i MENU + ':["i Ti,,ii::'{ ITi,'i;::'i,,]i i [:.,k:] ,' [:"i":] ::UP," Do _.,.m D'_,i:i,' [:i,r":]',;!iie ]. [:EH[ER :] :;R<_i,t..
,l#ig|%+@'l,=ilel+ • INPUT RENAME (Input rename) Use to change the name of the input source in the OSD and the front panel display. Press an input selector button (e.g., DVD) to select the component you want to change the name for and perform the following procedure. ....... ++,, ,_,,, ,............ +.... i+:) j,i,,ii,,'i+i i i,::i::!',ii,,ii"ii:: • HDMI SET (HDMI settings) Use to change the HDMI audio/video output/input to match the connected component.
iri_f_g|,f_T_-l=/i,l" AUDIO SELECT (Audio select) Use this feature if your player/tuner connected to one of the HDMI jacks on this unit outputs multi-channel audio source in 2-channel. Connect the optical and/or coaxial digital output jack(s) on your player to the corresponding digital input jack(s) on this unit in addition to the HDMI connection, and then set "AUDIO SELECT" to "OFF". The multi-channel signal goes through the digital jack and is output from this unit in multi-channel.
,lflfi'l%f_i-l_lq ' • OSD SET (OSD settings) Use to adjust the display time of the OSD. Use to manually the display. SET MENU adjust the various --+ MANUAL SETUP parameters related --+ DISPLAY position and to set the display to i::i)hi!::L:_ !:_i: J MENU 05[;, iii;H:[F: [,...................i:._ + Fi)F,[):[SF'L.i:I'r B)O%, 5E[ C)iJi..i:[ i !iiE[ iii;E[ [:",i[] y [:i,..] '.;!i;e ].e c.L. [:Ei'4 [ ER] ',;Ri_¢:..b}Pn [:.,L ] ...'[:,i_]]',;UP,"[)o_.,._r'_ i::lii[k.i[ ER:] ',',lii[r'd:..e! ...
You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level of each channel is identical when heard from your listening position. Press _ / _ to adjust.
5 Press TEST when you have completed all your adjustments. Set the operation mode selector to YSP. TEST % • All channel (see page levels cannot • "FRONT selected settings L/R" cannot L/R" stereo playback the stereo playback mode channels is selected Press CH LEVEL repeatedly (or press CH LEVEL and A / _) to select the channel you want to adjust. The front panel display changes as follows: (see mode. be adjusted CH LEVEL when Stereo plus 3 Beam is (see page 46).
I_,_ll'l_(lao 3 I _1l_lq q, I 1_1,'?'_'1 I_11I,I Press <1/ _ to adjust the channel volume. Control range: -10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. • All channel levels cannot be adjusted when the stereo playback (see page 51 ), or My Surround (see page 46) is selected as the beam mode. • "FRONT LIR" cannot be adjusted when Stereo plus 3 Beam is selected as the beam )node (see page 46).
You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, and AUX. We recommend setting the input mode to AUTO ill most cases. 3 Press INPUTMODE repeatedly to toggle between input modes. iNPUTMODE "' ' :"' ("i "'T'(- ii....."5iF -:_i° ii2 i;"i.5 When DVD is selected as the input source When TV or STB is selected as the input source "..,{°"" i°" i"_ 'T"C" _..
This unit has additional menus that are displayed adjust and customize the way this unit operates. When "F.PANEL on the remote Follow KEY" control the procedure is set to "F.PANEL: instead to adjust OFF" the system in the front panel display. (see page 75), STANDBY/ON These menus offer additional on the front panel is ineffective. operations to Use STANDBY/ON parameters.
_ I_1"_1_ i! !+i!+i!+iii! iii + ++ !!li MEMORY PROTECT You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. I Ii I o 1 i i l._l.'l _/.'1 I._t i i I i i t." 1I_. 11 i l._l I._tl +++! :ii ON, OFF vok i'i Ei'i 0 F;:"/ F::: F;:0 T E i2T =i MAX VOLUME You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. MAX, 99 to 01, MIN Control step: 1 veL i:i i::ii:.
In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area. Depending a remote on the external control code AV component is set.
• Operating your TV Set the operation mode selector to TV/AV, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. @ Numeric buttons Selects a TV channel for playback. @ CH +/Switches between the available TV channels. @ TV INPUT Switches the input source for your TV. @ TV POWER Turns on or off the power of your TV. @ TV INPUT1/2 Selects the input source of your TV. @ @ TV VOk +/Adjusts the audio output level of your TV.
• Operating your DVD player/recorder Set the operation mode selector to TV/AV and press DVD to select DVD as the input source. The control area of the remote control changes to the DVD operation mode. • Operating your STB (CATV/Satellite tuner) Set the operation mode selector to TV/AV and press STB to select STB as the input source. The control area of the remote control changes to the STB operation mode. @ .@ 07------- @ t @ @ Numeric buttons Enter numeric digits.
• Operating your VCR Set the operation mode selector to TV/AV and press VCR to select VCR as the input source. The control area of the remote control changes to the VCR operation mode. @ t @ Numeric buttons Enter numeric digits. @ CH +/Switches between the available VCR channels. @ Operation buttons for VCR Operate your VCR, such as play and stop. @ AV POWER Turns on or off the power of your VCR.
Setting macros for the TV with the tuning capability The TV macro feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a DVD, you would normally turn on the component, select DVD as the input source, and press the play button to start playback. The TV macro feature lets you perform all of these operations simply by pressing the DVD macro button.
Setting macros for the TV without the tuning capability Press and hold CODE SET and press one of the input selector buttons to select the input source you want to set macros for. Proceed to step 2 while holding down CODE SET. • Operating macros Press and hold one of the input selector buttons for approximately two seconds to select the input source you want to operate macros for. The TV input changes at the same time the input mode changes. TV MUTE While holdingdown, press %_,._.iii:.,_._ii!_,..
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. • General See Problem Cause Remedy page This unit fails to turn on when STANDBY/ON is pressed, or enters the standby mode soon after the power has been turned on. This unit suddenly standby mode.
See Problem Cause Remedy page No sound subwoofer. from the BASS OUT in SUBWOOFER FRONT. SET is set to Select SWFR. 64 ----.__.__ The source does not contain low bass signals. Distorted or too little bass sound. CROSS OVER in SUBWOOFER incorrectly. One of the night listening currently Too much bass sound. TruBass SET is set enhancers is Turn oft" the night listening is currently turned on. are enhancers. 54 Turn off TruBass. level of the subwoofer is too high.
D E_T_7/.3 F_ET_T_ti Ez • Remote control See Problem Cause Remedy page The remote control does not work and/or function properly. Cannot operate external components with the remote control of this unit. Wrong distance The remote or angle. control fimctions within a Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition The batteries Replace are weak.
• Dolby Digital Dolby Digital • is a digital surround you completely independent front channels (left, center, stereo channels, channels. Dolby sound system multi-channel that gives audio.
• LFE 0.1-channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 516 channels in Dolby Digital or DTS 5.116.1 -channel systems. • PCM (Linear PCM) Linear PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted without using any compression.
• Numerics • M 3 Beam ............................................................................ 46 MANUAL SETUP 5 Beam ............................................................................ 45 MEMORY ....................................................................... 39 My Beam ......................................................................... 52 • A AC power supply cable ................................................... Audio pin cable .............................
AMP SECTION GENERAL • Maximum Output Power ................................................. 2W(l kHz, 10%THD, 4f_)x 16 15 W (100 Hz, 10% THD, 4 f2) × 2 • Po'a, er Supply [U.S.A. and Canada [Australia model] [Korea model] • Driver [General .............................. shiekting 8 cm (3 in) cone magnetic type × 16 V. 50/60 Hz V. 50/60 Hz ....................................... AC 220-240 V. 50/60 Hz .................................... AC 110-120 V. 50/60 Hz ............................
Limited Guarantee for European Economic Area (EEA) and Switzerland Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha prnduct needs guarantee service, please contact the dealer from whom it was purchased, lfynu experience any difliculty, please contact Yamaha representative office in your country. You can find lhll details on our website (http://ww,,_;yamaha-hifi.eom/or http://ww,,_;yamaha-uk.com/lor U.K. resident).
List of remote control codes Liste des codes de commande Liste der Fernbedienungscodes Lista 6ver fj_irrstyrningskoder Lijst met afstandsbedieningscodes CnHCOK KO_OB /_HCTaHUHOHHOrO TV ADMIRAL AIWA AKAI ALBA AOC BELL & HOWELL BESTAR 292, 293,216 294, 276, 283,284 295,296 296 297 292 298 BLAUPUNKT 229, 222 BLUE SKY 298 BRANDT 223 BROC SONIC 297 BUSH 296 BYD:S1GN 201,2112 CLATRONIC 298 CRAIG 224 CROSLEX 225,298 CURTIS MATHlS 297,226 DAEWOO 297, 298, 224, 227,228 DAYTRON 239 DUAL 298 DW1N 293, 28 l EMERSON
THOMAS397 THORN 393,396 TOSHIBA335,389 TOTEV1SION 363,396 UNITECH 363 376 UNIVERSUM 396, 327, VIDEOSONIC 363 W.
@ © 2008 YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 5660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GO, ENGLAND SCANDINAVIA A.B.
Decide where to insla]l 1his ur_it, TV TV lnsta]l this _fnit usirig a rat;k_ _tc_.
Turn on lhe power of your TV, {_ Pre.