Quick Reference Guide

ManualsBrandsYamaha Manualsaudio & home theatreYSP-5100

English

for North America

This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed

operation, refer to the “Owner’s Manual” in the supplied CD-ROM.

Check that you received all of the supplied accessories referring to “Supplied accessories” (page 6 of “Safety and Accessory Information” (separate booklet)). For

instructions on how to operate or set the external components, refer to the owner’s manual supplied with each component.

Installing this unit

Decide where to install this unit.

This unit uses sound beams to create surround effects (the arrows in the following diagrams indicate the images of paths of 5-channel sound beams). To achieve desired

surround sound effects, install this unit where there are no objects such as furniture obstructing the path of sound beams.

When installing this unit parallel to the wall When installing this unit in the corner of a room

: Object such as furniture

Front left channel

Center channel

Front right channel

Surround left channel

Surround right channel

Front left channel

Center channel

Front right channel

Surround left channel

Surround right channel

40° to 50°

: Object such as furniture

Attach the stands.

Attach the supplied stands to this unit as shown below. Make sure that you attach

the left and right stands correctly. These stands are unnecessary if you use the

optional wall mount bracket.

When installing this unit using a rack

When installing this unit, be careful not to scratch this unit, rack or ﬂoor. Depending

on your installation environment, connections with external components (next step)

should be done before installation.

Left stand (supplied)

Screws (for stands, supplied)

Right stand (supplied)

INPUT

VOLU

INTE

LLIBEAM MI

Connect your TV and Blu-ray disc player to this unit.

The rear panel illustration shows jacks and their names to help you ﬁnd them easily. They are not exactly the same as the ones on the actual rear panel of this unit. Do not

plug the power cable into an AC wall outlet until all connections are complete.

This example shows a way to make the most of the capability of this unit. You can enjoy Blu-ray disc audio and

video with higher quality via the HDMI cable. In addition, by inputting TV sounds to this unit through the optical

cable, you can enjoy multi-channel audio from the TV.

Example - A

Optical digital

output

HDMI

output

HDMI

input

AUX 1 TVAUX 2AUX 1 TVOUTIN

IR IN

SYSTEM

CONNECTOR

SIRIUS

SUB

WOOFER

COMPONENT

DIGITAL INAUDIO INVIDEO

RS-232C

OUT

HDMI

IN 1

IN 2

IN 3

IN 4

Blu-ray disc player

This unit

To AC wall outlet

1. Pull out the cap (if attached)

2. Check the direction

Do not plug the power cable

into an AC wall outlet until all

connections are complete.

System connection

(supplied with Yamaha subwoofer)

Audio connection

• If you make a system connection, the power of the sub-

woofer automatically changes in conjunction with the power

of this unit (Yamaha subwoofer).

• If you connect a subwoofer by wireless, refer to “Wireless

connection for subwoofer” described in the right section.

Subwoofer

Connect cables in the order of the circled numbers.

Supplied Sold separately

Optical cable

(to play back TV digital sounds on this unit)

Power cable

HDMI cable

(to display the Blu-ray disc video and this unit’s menu screen on the TV)

HDMI cable

(to input the digital audio/video signals of the Blu-ray disc to this unit)

If you connect this unit to an HDMI control-compatible TV (except some models) via HDMI, you can use the remote control supplied with your TV to turn on or off the

power, select the audio output component, and adjust the volume level of this unit. For details, see “Using the HDMI control function” of “Owner’s Manual” (on the

supplied CD-ROM).

Quick Reference Guide

This example shows a way to connect a TV and Blu-ray disc player using the supplied cables. You can enjoy the

multi-channel audio from the Blu-ray disc player and the analog/digital audio from the TV. Use the video pin cable

supplied with your Blu-ray disc player to make a video connection between your Blu-ray disc player and this unit.

Example - B

AUX 1 TVAUX 2AUX 1 TVOUTIN

IR IN

SYSTEM

CONNECTOR

SIRIUS

SUB

WOOFER

COMPONENT

DIGITAL INAUDIO INVIDEO

RS-232C

Analog audio

output

Video

input

Video

input

Video

output

Coaxial digital

output

Optical digital

output

System connection

(supplied with Yamaha subwoofer)

Audio connection

Subwoofer

Blu-ray disc player

This unit

To AC wall outlet

Video connection

Do not plug the power cable

into an AC wall outlet until all

connections are complete.

1. Pull out the cap

(if attached)

2. Check the direction

• If you make a system connection, the power of the

subwoofer automatically changes in conjunction with

the power of this unit (Yamaha subwoofer).

• If you connect a subwoofer by wireless, refer to

“Wireless connection for subwoofer” described in

the left section.

Connect cables in the order of the circled numbers.

Supplied

1 Video pin cable

(to display this unit’s menu screen

on the TV)

2 Audio pin cable

(to play back TV analog sounds on

this unit)

3 Optical cable

(to play back TV digital sounds on

this unit)

4 Digital audio pin cable

(to input digital audio signals of the

Blu-ray disc to this unit)

5 Power cable

Preparing the remote control

Install batteries in the remote control.

Make sure you insert the batteries according to the polarity markings (+/–).

Pull the tab

Operation range

INPUT VOLUME INTELLIBEAM MIC

BS CS

D 音声多重

地デジ

コードセット

地アナ

/+10

7 8 9

4 5 6

1 2 3

デコーダー

インテリビーム

ユニボリューム

Remote control

30°

Within 6 m

(20 ft)

30°

These examples show ways to connect additional components (such as a tuner or game console), a subwoofer by wireless, and an indoor

FM antenna. Do not plug the power supply cable into an AC wall outlet until all connections are complete.

This example shows a way to make

the most of the capability of this unit.

Connect your external component to

one of the HDMI IN jacks of this unit.

Tuner, game console, etc.

OUT

HDMI

IN 1

IN 2

IN 3

HDMI

OUTPUT

HDMI cable (sold separately)

Wireless connection for subwoofer

This shows a way to connect a subwoofer by using the Yamaha

wireless subwoofer kit (SWK-W10). For instructions on SWK-W10,

refer to “Safety and Accessory Information” (separate booklet).

INPUT VOLUME INTELLIBEAM MIC

Subwoofer

SWK-W10

For proper transmission, you need to set the group IDs of this unit and SWK-W10

to the same value. For the Group ID setting of this unit, refer to “WIRELESS

SETUP” of “Owner’s Manual” (supplied CD-ROM).

Connecting the FM antenna

Connect the supplied FM antenna.

FM ANTENNA

FM antenna (supplied)

Example - aExample - a

This example shows a way to connect

your external component using the

AUX1 (optical digital or stereo analog)

and VIDEO IN jacks.

Component

video output

Analog

audio

output

Coaxial

digital

output

R L

AUX 1 TVAUX 2AUX 1 TVOUTIN

SIRIUS

SUB

WOOFER

COMPONENT

DIGITAL INAUDIO INVIDEO

Tuner, game console, etc.

Video pin cable

(sold separately)

Audio pin cable

(sold separately)

Optical cable

(sold separately)

This example shows a way to

connect your external component

using the AUX2 (coaxial digital) and

COMPONENT VIDEO IN jacks.

AUX 1 TVAUX 2AUX 1 TVOUTIN

SIRIUS

SUB

WOOFER

COMPONENT

DIGITAL INAUDIO INVIDEO

Coaxial digital

output

Component

video output

Tuner, game console, etc.

Component

video pin cable

(sold separately)

Digital audio pin cable

(supplied)

Example - bExample - b

Example - cExample - c

Connecting external components to this unit

– 1 –

Summary of content (8 pages)

PAGE 1
English Quick Reference Guide for North America This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed operation, refer to the “Owner’s Manual” in the supplied CD-ROM. Check that you received all of the supplied accessories referring to “Supplied accessories” (page 6 of “Safety and Accessory Information” (separate booklet)).
PAGE 2
Connecting external components to this unit Connect your TV and Blu-ray disc player to this unit. The rear panel illustration shows jacks and their names to help you find them easily. They are not exactly the same as the ones on the actual rear panel of this unit. Do not plug the power cable into an AC wall outlet until all connections are complete. This example shows a way to make the most of the capability of this unit. You can enjoy Blu-ray disc audio and video with higher quality via the HDMI cable.
PAGE 3
2 Connecting external components to this unit These examples show ways to connect additional components (such as a tuner or game console), a subwoofer by wireless, and an indoor FM antenna. Do not plug the power supply cable into an AC wall outlet until all connections are complete. Example - a This example shows a way to make the most of the capability of this unit.
PAGE 4
2 Connecting external components to this unit This example shows a way to connect a TV and Blu-ray disc player using the supplied cables. You can enjoy the multi-channel audio from the Blu-ray disc player and the analog/digital audio from the TV. Use the video pin cable supplied with your Blu-ray disc player to make a video connection between your Blu-ray disc player and this unit. Example - B Connect cables in the order of the circled numbers.
PAGE 5
4 Carrying out the AUTO SETUP (IntelliBeam) Carry out the AUTO SETUP to adjust the settings so that the best listening environment is created. The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress.
PAGE 6
4 Carrying out the AUTO SETUP (IntelliBeam) 5 9 Press and hold INTELLIBEAM for more than 2 seconds. The INTELLIBEAM key is located inside of the slide cover. Press ENTER. The following screen appears on the TV for 2 seconds and then the menu screen disappears from the TV. CINEMA DSP SURROUND UNIVOLUME 6 SUR. DECODE INTELLIBEAM 1 2 3 4 5 6 7 8 9 AUTO SETUP COMPLETE Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the unit.
PAGE 7
Basic playback operations Playing back audio signals Enjoying Blu-ray discs in surround sound Enjoying TV in surround sound 1 Select the Blu-ray disc player as the video input on your TV. 1 Select the desired TV channel. 2 1) Press HDMI1-4 or AUX1/2 to select the Blu-ray disc player as the input source. 2 Press TV to select the TV as the input source. For example, if the Blu-ray disc player is connected to the HDMI IN 1 jack of this unit (as shown in “Example - A”), press HDMI1.
PAGE 8
Playing back audio signals Playing back iPod/iPhone 1 FM tuning 1 Prepare your iPod/iPhone and the Yamaha wireless transmitter for iPod (PDX-50TX/ PDX-50BC). Press RADIO repeatedly to select “FM”. TV For instructions on PDX-50TX/PDX-50BC, refer to “Safety and Accessory Information” (separate booklet). AV TV AUX 1 AUX 2 HDMI 1 HDMI 2 HDMI 3 iPod RADIO HDMI 4 MOVIE MUSIC ENTER TAINMENT OFF CINEMA DSP 2 Start play back of your iPod/ iPhone. INPUT VOLUME XXXXFMX88.