Full HD Waterproof Motorcycle & Watercraft Action Camera
CONTENTS Main Features Buttons and Camera Body Installing Battery Installing MicroSD card Waterproof Housing Mounting your Camera Remote control Screen - Information and Icons Main Menu - Navigation Main Menu - Folders Video Recording – How to Image Capture – How to FOLDER - Video Playback FOLDER - Image Viewing Deleting Files FOLDER – Video Settings Normal Recording Motion Detection Set Auto Recording Start Time Auto Record in Vehicle Loop Record Video resolution settings Video Sound Record Content 2 3 4
Main Features 480 x 240,1.5” TFT LCD Screen 5.0MP FULL HD CMOS sensor 170° Super wide angle FOV( field of view) under 720P, 127 ° under 1080P 720P H.
Camera Buttons and Ports 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Battery Installation Install the battery according to the graphics A - Open the battery cover B - Install the battery ( Note: label side face up) C - Close back cover Inserting Memory Card The camera does not have built-in memory.
Using the Waterproof Housing 1. Opening The Latch Per arrow in the graphic below, pull latch "A" outward and the clasp "B" will slacken and allow you to pull lock mechanism away from the rear cover. 2. Insert Camera Open hinged rear cover and insert camera as shown in the graphic below. 3.
Mounting the Waterproof Housing To mount, choose the best mount to for the event you are planning, The Yamaha HD camera kit includes the following clips, mounts and bases. Main clip mount which inserts into one of two base mounts, one for flat surfaces and a curved base with 3M adhesive backing for helmet mounting.
System Boot Screen Opening screen Icons and Information which will display along with an image of what the camera lens is pointing at. Main Menu Pressing the MENU button opens a directory with four folders. This easy to navigate directory stores all your videos, images and is where settings are changed for the feature you need. The Icons shown link as follows: Navigation Scrolling is the use the “< or >” buttons on the button bar.
Video Recording 1. Press button to turn on the camera. 2. Press REC button to start the video record, a red icon will flash on the screen to indicate camera is recording. 3. For Zoom, Press " <" or " >" Scroll buttons. 4. To stop recording, press REC again and your video will be saved up to that point. Video Screen Note! Zoom feature not available when camera is inside its waterproof case. Image Capture 1. Press button to turn on the camera. 2. Press button again while camera is on to take a picture.
Video Playback 1. Press MENU button to enter the main menu Press Scroll buttons to choose the Video Folder. In the example Menu screen here the Video Folder is highlighted and the total files in the folder is displayed in the upper left corner. Here it shows 8 video clips. Main Menu Screen 2. Press REC button to enter the folder. Video clip thumbnails will display as per example Thumbnail screen. The active thumbnail will be highlighted with an orange border, 3.
Browse Images 1. Press MENU button to enter the main menu Press Scroll buttons to choose the Image Folder. The quantity of images in the folder will display on the top corner of the folder Icon. If the number of images displayed is 0 (zero), the folder will not open. Main Menu Screen 2. Press REC button to enter the image folder. All the images will be displayed in thumbnail sets of 3 per row’. The active thumbnail will be highlighted with an orange border. 3. Press REC to open the Image.
Video Setting Press MENU button enter the main menu. Press “<” or “>”buttons to scroll the Video Setting folder. Press REC button to enter. VIDEO MODES: Normal REC Camera will start recording video once the REC button is pressed. A small red circle start to flash on the screen indicating recording. Also half of the red LED light bar will steady flash. When your finished Press REC button again to stop video record, The video clip will automatically be saved.
Auto REC This feature is for use if camera is used as a “black box” in a vehicle The camera will start recording video automatically after vehicle has been turned on. For this feature to work presets must first be made in “Auto REC time” settings menu. OFF:Not activated 10 Seconds:Camera will start recording 10 Seconds after starting vehicle. 20 Seconds:Camera will start recording 20 Seconds after starting vehicle. 1 Minute:Camera will start recording 60 Seconds after starting vehicle.
Self-Timer Press button to active this feature, camera will take pictures every 10 seconds. This feature is for use with Time Lapse video software. Note:Self-Time feature upon power OFF, will reset to normal capture automatically. Time Stamp When set at ENABLE, the Date and Time video was taken will display on the video . Photo Size Set image resolution here. Select the size image you need.
Date & Time Setting Date Setting: Press REC to select the option, Press REC again to next option select, use Scroll buttons to change. 2013: Year option, Red color means active for changing 10:Month option, use Scroll buttons to select, press REC to confirm. 15:Date option, use Scroll buttons to select, press REC to confirm. Time Setting: Press REC to select the option, Hour will be in red, use Scroll buttons to change. Then REC to confirm switch to Minute, use Scroll buttons to change and REC to confirm.
Auto Screen OFF For power saving or simply to turn off the screen when recording. Screen will turn off at set time. Press REC button to enter and confirm the setting. 1 Minute:Camera will turn off the screen. 5 Minutes:Camera will turn off the screen. Volume This option controls sound level of internal speaker, set using Scroll buttons. Format This function is for re-formatting a microSd card. Note:All data on memory card will be erased if you use this function.
Firmware Update The camera may have software updates and you may need to install new firmware: The Camera firmware can be found on this camera’s official Customer Service web portal at: www.ymap.motao.com Follow the instructions at the site to download and install the firmware package: You will need to install the update onto a MicroSD card via PC then transfer the card to your camera.
Connect to Television Via USB-RCA cable connect with TV ( output) Find out the USB-RCA cable in standard accessories, USB side insert to camera, RCA side insert to TV ( Yellow for Video, White for Audio) Via HDMI cable connect with TV (output) Please insert the A type connector to the TV , insert C type connector to camera Note:The video that output to TV is 1080P resolution when playing back video clip, real-time output display is 480i only. 2.
Battery Charging Install the battery per instructions on page 4, then select the method of charging below. Charge by computer Note: Power charge by computer, please make sure the camera is POWER OFF state. The green charging indicator will flash, indicator will turn off after full charged. Charge by Wall charger The Yamaha camera includes an wall socket direct charger made specifically for the camera. It plugs into the cameras mini USB port Charging and Battery Tips: 1.
Specifications Basic Spec Main Unit Spec Other Function Item Spec Built in memory TF Card Size LCD Resolution Size Sensor Image Pixel Video Output Interface MIC Audio Output Interface Speaker PC USB Interface Battery Power DC Charger Main Unit Dimension Weight Waterproof Housing Dimension Motion Detection Timing Record Auto Record Loop Record Continuous Capture Self-Timer Zoom Focus Time Stamp Image Flip Video Quality Option Support Record Under Screen Off File Protection While Low Power No 1-32 GB 1
Parts Listing Page 20