manual

ManualsBrandsYamaha ManualsMP3/MP4 playersYIT-W10

YIT-W10

Wireless transmitter for iPod

Transmetteur sans fil pour iPod

OWNER’S MANUAL

MODE D’EMPLOI

English

Français

Summary of content (8 pages)

PAGE 1
UC English YIT-W10 Wireless transmitter for iPod Transmetteur sans fil pour iPod OWNER’S MANUAL MODE D’EMPLOI Français
PAGE 2
FCC INFORMATION (for US customers) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
PAGE 3
Caution: Read this before operating this unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 3 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e.
PAGE 4
■ Introduction ■ Using YIT-W10 YIT-W10 is a wireless transmitter designed for iPod or iPhone series. YIT-W10 employs the Yamaha “yAired” technology to establish a wireless connection with another Yamaha product that supports “yAired” and enables playback of the iPod or iPhone on your Yamaha product. Also the charging cradle can be used for charging the iPod or iPhone, or to play music or movies for an extended time.
PAGE 5
LED Off Status An iPod or iPhone is not connected, or has stopped playing. However, lights up for 30 seconds or 2 minutes (depends on the iPod/iPhone) after connecting or stopping playback. Flashes green continuously Connection in progress, please wait. Flashes green once Adjusting the volume level. Lights up green A connection is established. You are ready to start playback of iPod on another Yamaha product.
PAGE 6
■ Troubleshooting Refer to the table below if the unit does not function properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, contact the nearest authorized Yamaha dealer or service center. Problem No sound. Controlling volume on the iPod or iPhone does not work. Cause Remedy PDX-50TX and another Yamaha product are not connected since they are set to different groups. Set both PDX-50TX and another Yamaha product to the same group.
PAGE 7
■ Specifications Supported iPod .... iPod (5th generation), iPod classic, iPod nano, iPod touch Supported iPhone ............................................... iPhone, iPhone 3G, iPhone 3GS (as of August 2009) Power supply ................................AC 120 V, 60 Hz Power consumption ........................................... 4 W Power consumption without connecting iPod/iPhone..................................... less than 1 W Transmission range .........Approx.