User Guide Headphones EN
Contents Contents Introduction 3 About this User Guide.. .............................................................................. 3 Advantages of this product......................................................................... 4 Part names and accessories........................................................................ 5 Connections 7 Connecting the headphones with the included cable...................................... 7 Connecting to an audio device.. .............................
Introduction > About this User Guide Introduction About this User Guide This guide explains how to connect and operate the product. ( The precautions and other matters in this guide are classified as follows. ( WARNING This content indicates “risk of serious injury or death.” ( ( ( ( ( ( CAUTION This content indicates “risk of injury.” NOTICE Indicates points that you must observe in order to prevent product failure, damage or malfunction and data loss, as well as to protect the environment.
Introduction > Advantages of this product Advantages of this product This product is a pair of headphones that connects via cable to an audio device such as a headphone amplifier.
Introduction > Part names and accessories Part names and accessories Part names a b c f e a Headband b Head pad c Slider d Cable jacks (L), (R) e Housing f Earpads d 5
Introduction > Part names and accessories NOTICE ( This product uses strong magnets. Do not place or hold this product near any objects that might be affected by the magnetic field of this product. For objects like clocks or ATM cards, the data on the affected device may be corrupted or destroyed. Metal parts like paper clips or screws may come into contact with and scratch this product, or cause a malfunction.
Connections > Connecting the headphones with the included cable Connections Connecting the headphones with the included cable LE FT Connect the included headphone balanced cable or unbalanced cable to the headphones. Make sure that the correct cable plugs, L (left) and R (right) are plugged into the correct sides on the headphones, and firmly insert the plugs all the way into the Cable jacks. NOTICE ( ( ( When plugging or unplugging the cable, make sure to grip the plugs with your hand.
Connections > Connecting to an audio device Connecting to an audio device This shows you how to connect the included cable to an audio device such as a headphone amplifier. CAUTION ( Make sure to turn the volume all the way down on the devices you connect to this product to beforehand. Headphone amplifier or other equipment L R PHONES Headphone output jack Headphone Unbalanced Cable (3.5 mm, three-conductor plug, includes 6.3 mm adapter plug) Headphone Balanced Cable (4.
Connections > Connecting to an audio device NOTE ( ( ( ( ( The included cable and adaptor plug are only for use with headphones. Make sure to plug the cable only into the headphone output jack of the device to which you are connecting. Be sure to grip this cable’s plug when inserting or unplugging. If you pull on the cable instead, the cable wires may break. Insert the plug all the way into the jack. If the plug is not fully inserted, you may hear no sound, or you may hear breaks in the sound.
Wearing this product > Putting the headphones on Wearing this product Putting the headphones on Put the headphone marked L on your left ear, and put the headphone marked R on your right ear. Make sure that each headphone covers your entire ear.
Wearing this product > Putting the headphones on Use the slider to adjust the position according to the size of your head. NOTICE ( ( ( Be careful not to get your fingers or hair caught in the movable part of the slider. Do not forcibly pull on the movable part of the slider. These actions may cause a malfunction. Do not apply too much force to the mesh covering on the housing, or expose it to impact. This may damage the mesh covering.
Wearing this product > Replacing the earpads Replacing the earpads NOTICE ( When replacing the earpads, do not apply too much force to the mesh covering on the housing, or expose them to impact. This may cause a malfunction or damage the product. Mesh covering on housing Follow these steps to replace the earpads. 1 Hold the earpad and rotate counterclockwise while pulling the earpad towards you to detach it from the headphones.
Wearing this product > Replacing the earpads 2 Align the replacement earpad with the marked areas inside the headphone housing. The housings are marked on the inside with “L” for the left side and “R” for the right side. Align the respective “L” and “R” markings on the housings with those on the earpads. L R 3 Hold the earpad and rotate clockwise while attaching the earpad onto the headphones.
Wearing this product > Replacing the earpads NOTE After attaching the earpads, lightly pull on them to make sure that they won’t easily come off. The sound quality may not be as good if the earpads are not firmly attached.
Maintenance > Taking care of the headphones Maintenance Taking care of the headphones Daily maintenance ( Use a dry and soft cloth when wiping the product. ( Do not use disinfectant solutions containing alcohol or similar liquids. ( To prevent rust or deformation, always keep the product dry and avoid placing it in extremely cold or hot locations. ( Be careful not to heat the product with a hairdryer or heating device. ( Do not expose this product to direct sunlight for long periods of time.
Maintenance > Taking care of the accessories Taking care of the accessories Earpads ( ( ( Do not use shoe polish, solvents (such as thinner or benzine), or disinfectant solutions containing alcohol or similar liquids. Hair care products may cause damage to leather. If any such products get on the earpads, carefully wipe them off. The earpads may naturally degrade over time, even when stored and used normally. We recommend that you replace the earpads soon if they have degraded.
Maintenance > Storing this product Storing this product You can store this product in the box when you are not using it. We recommend that you maintain and clean the product before storing it, to keep it in good condition to use for a long time. Move the sliders to their topmost positions R NOTICE Close the lid so that these parts of the inside of the lid are touching the sliders on the headphones.
Troubleshooting > Check this first Troubleshooting Check this first If this product does not operate normally while you are using it, check the following points. [Search tag] #Q01 Troubleshooting No sound can be heard ( The cable may not be correctly connected. Make sure that the cable is correctly plugged in all the way into the headphones and the connection jack on your audio device. “Connections” (p.7) ( ( The power of the audio playback device might not be on.
Troubleshooting > Aftersales service Aftersales service ( ( ( The earpads are replaceable parts. As the earpads are an important part of this product that affect the sound quality, we recommend that you replace them soon if they are degraded or damaged. The serial number that is engraved on the headband cannot be engraved again on the replacement part if the headband is repaired or replaced.
Appendix > Specifications Appendix Specifications The specifications of this product are as shown below. YH-5000 Headphones (main unit) ( ( ( ( ( ( Driver type Open-back type Driver units Planar magnetic (Orthodynamic™ driver) Frequency response 5 Hz–70 kHz Sensitivity 98 dB/mW (at 1 kHz) Impedance 34 Ω (at 1 kHz) Weight Approx. 320 g (11.29 oz) (not including cable but including earpads (LE)) HUC-SC020 Headphone Unbalanced Cable ( ( Length Approx. 2 m (78-3/4″) Plug shape Device side 3.
Appendix > Specifications HEP-5000LE Headphone Earpads (Leather) ( ( Surface material Sheepskin and polyurethane leather Weight Approx. 30 g (1.06 oz) / L and R pair HEP-5000SU Headphone Earpads (Ultrasuede®) ( ( Surface material Ultrasuede® (artificial suede-like leather) Weight Approx. 30 g (1.06 oz) / L and R pair HST-5000 Headphone Stand ( ( ( Dimensions (W × H × D) 118 × 283 × 146 mm (4-5/8" x 11-1/8" x 5-3/4") Weight Approx. 980 g (34.
Appendix > Optional accessories (sold separately) Optional accessories (sold separately) The following optional products are also available for purchase to use with this product.
Appendix > Trademarks Trademarks The trademarks used in this guide are as follows. ( ORTHODYNAMIC™ “ORTHODYNAMIC” is a registered trademark of Yamaha Corporation. ( “Ultrasuede®” is a registered trademark of Toray Industries, Inc.
Layout Folder: YMH_PDF_Manual_A5_AV Stylesheet Name: 01_YMH_PDF_Manual_A5_AV_En-Multi Stylesheet Version: 2022.04.13 Yamaha Global Site https://www.yamaha.com/ Yamaha Downloads https://download.yamaha.
