English Franc;ais Deutsch
FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
This equipment compiles with FCCIIC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-l 02 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
• Precautions Read this before using this unit. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 1 Install this unit in a cool, dry, clean place away 4 Do not clean this unit with chemical solvents; from direct sunlight, heat sources, and sources this might damage the finish. Use a clean, dry of excessive vibration, dust, moisture, and/or cloth. 5 Do not attempt to modify or fix this unit. cold. (Do not use/keep this unit in a car etc.
• Introduction We greatly appreciate your purchase of this Yamaha product. This product is an adapter for wireless connection of a Bluetooth-compatible device. It allows you to enjoy the audio stored on a Bluetooth-compatible portable music player or mobile phone with clarity and high sound quality. • Checking the package contents Check that the following items are included in the package. YBA-10 (Main unit) Dock cable (2 m I 6.
• Connecting the dock cable 1 Connect one of the plugs of the dock cable to the dock cable terminal of this unit firmly. n ~:= \ J Connect the plug with the side with the release button facing upward. ~ 2 Make sure the power of the YBA-10 compatible component (AV receiver, etc.) is turned off. 2 En 3 Connect the other plug of the dock cable to the DOCK terminal of the YBA-10 compatible component (AV receiver, etc.).
• Installation • Pairing Install in a stable place, being careful of the following points: • Do not place on top of steel or other metal plates. • Do not cover with a cloth, etc. • Install in the same room as the device with which signals are to be exchanged (Bluetooth profile A2DP or AVRCP-compatible portable music player, mobile phone, etc.) within a direct, line-of-sight distance of 10 m (33 ft). • Make sure there are no obstacles between this unit and the other device.
• About the status indicator • Disconnecting the dock cable Status indicator 1 Make sure the power of the component to which the YBA-10 compatible is connected is turned off. 2 Press and hold the release button and then pull off the plug of the dock cable. The status indicator lights or flashes as shown below to indicate the dock's operating status.
• Troubleshooting Check the following if this unit should not be operating properly (if noise is output or if the unit malfunctions): Incomplete connection I Check the connection of the YBA-1O compatible component (AV receiver, etc.) and dock connection cable. Check the connection of this unit and dock connection cable. The device with which you are trying to exchange signals is not compatible with A2DP or AVRCP. Use an A2DP or AVRCP-compatible device.
• Specifications Bluetooth Ver. 2.0+EDR Support A2DP/AVRCP profile Frequency band 2.4 GHz Maximum communications distance (line-of-sight distance with no obstacles) 10 m (33 ft) Dimensions (W x H x D) 80 x 50 x 70 mm (3-118" x 1-15/16" x 2-3/4") Weight 153 g (5 oz.) Please note that all specifications are subject to change without notice.
Limited Guarantee for European Economic Area (EEA) and Switzerland Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our website (http://www.yamaha-hiti.comlor http://www.yamaha-uk.comlfor U.K. resident).
_YAMAHA I~l PRINTED WITH ~SOYINK ---1,.. 1.-...;............ © 2008 YAMAHA CORPORATKJN All rights reserved. YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEl HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE SA.
YAMAHA Home Audio products are designed and manufactured to provide a high level of trouble-free performance. YAMAHA Electronics Corporation, USA, is proud of the experienced craftsmanship that goes into each and every YAMAHA Home Audio product. YAMAHA sells its Home Audio products only through a network of high quality, specially authorized dealers and is pleased to offer the following Limited Warranty, which applies only to products purchased from our authorized dealers.
