En Fr Es OWNER'S MANUAL MODE D'EMPLOI MANUAL DE INSTRUCCIONES U
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2 IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture and cold. For proper ventilation, allow the following minimum clearances.
En FEATURES WX-030 Plays music files in smartphones via a network (using MusicCast CONTROLLER app, DLNA servers, Spotify), AirPlay (iPod), and Bluetooth (Bluetooth device). Also you can use your smartphone as a remote controller. Plays music from Internet radio and online streaming content. Plays music files in PCs and DLNA servers.
INTRODUCTION CONTENTS INTRODUCTION SUPPLIED ACCESSORIES .................................. 2 PART NAME .......................................................... 3 OTHER FUNCTIONS AND INFORMATION PREPARATION INSTALLATION ..................................................... 4 TURNING ON THE POWER .................................. 5 CONNECTING TO THE NETWORK...................... 6 HOME AUDIO NETWORK WITH MusicCast ....... 7 Connecting to the network using MusicCast CONTROLLER .....................
En PART NAME ■ Top panel 234 1 567 Bottom 8 A B (power)/CONNECT (☞ P.5) E Bluetooth indicator Lights during Bluetooth connection. Turns down the volume. C Turns up the volume. F Power indicator Lights while the unit is turned on. G Network indicator Lights while the unit is connected to the wired or wireless (Wi-Fi) network. D Plays/pauses. H Reset button (☞ P.16) Press to restart the unit. y A, B, C, D are touch sensors. They react when you touch them with your finger.
PREPARATION INSTALLATION Plug the power cable into the wall outlet after connecting all the other cables. Note Placing the unit too close to a CRT TV may impair the picture color or cause a buzzing noise. In this case, move the unit at least 20 cm (8") away from the TV. This is not an issue with LCD and plasma TVs. Install in a stable place, being careful of the following points: • Do not place on top of steel or other metal plates. • Do not cover with a cloth, etc.
Rear pannel En TURNING ON THE POWER A Plug the power cable into the wall outlet and tap (power)/CONNECT. The unit turns on and the power indicator lights. If you tap again, the unit turns off (standby mode) and the power indicator turns off. Power cable y Auto Standby Auto Standby is a mode in which the unit automatically enters standby mode if about 20 minutes have elapsed with no playback and no operation. You can enable/disable this mode with the MusicCast CONTROLLER app (☞ P.7).
CONNECTING TO THE NETWORK Connect the unit to the network as shown below. Tablet This unit Mobile device PC LAN Network cable Broadband router Internet Modem WAN Network attached storage (NAS) y • For details on Internet connection, refer to the owner’s manuals of your connecting devices. • Some security software installed on your PC or the firewall settings of connecting devices (such as a router) may block the access of the unit to the connecting devices or the Internet.
En HOME AUDIO NETWORK WITH MusicCast MusicCast is a brand new wireless musical solution from Yamaha, allowing you to share music among all of your rooms with a variety of devices. You can enjoy music from your smartphone, PC, NAS drive and music streaming service anywhere in your house with one easy-to-use app. For more details and a lineup of MusicCast compatible products, visit our website. http://www.yamaha.
HOME AUDIO NETWORK WITH MusicCast ■ Setting of the devices and playback Create the following network (MusicCast Network) using the MusicCast CONTROLLER app. WX-030 wireless router y If you want to install a MusicCast compatible device to a location that is out of range of the wireless router, connect another MusicCast support device to the router with a network cable to extend the range (Extend mode).
LISTENING TO THE MUSIC En LISTENING TO THE INTERNET RADIO You can listen to world-wide radio stations via Internet. After connecting the unit to the network, use the MusicCast CONTROLLER app (☞ P.7) to play the radio. y You can use the advanced feature of vTuner (such as adding a new station to the list) by accessing the following website with the web browser on your PC. http://yradio.vtuner.com/ - Before registering the Internet radio station, play any Internet radio station with this unit.
PLAYING BACK MUSIC WITH AirPlay ◆ A B C For Windows Media Player 11 Start the Windows Media Player 11 on your PC. Select “Library” then “Media Sharing.” Check the “Share my media to” box, select the “WX-030” icon, and click “Allow.” y The names on the list are device names (Room names). You can set Room names on “ Room name/Information” in the MusicCast CONTROLLER app (☞ P.7). If the Room name is not set, the Room name is “WX-030 ***.” (*** is an arbitrary number.) D Click “OK” to exit.
En LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (smartphone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device. Pairing this unit with your Bluetooth device ■ Pairing (Registration) 1 (power)/CONNECT A Turn on the unit. The power indicator lights. B On your connecting device (mobile device), set Bluetooth to on.
OTHER FUNCTIONS AND INFORMATION STEREO PAIR You can use two WX-030 units to reproduce stereo sound by setting each speaker as the right or left speaker. Set the left and right speakers separately by following the steps below. Note Left speaker WX-030 WX-030 Right speaker • To use the Stereo Pair function, you need two WX-030. • Before setting the Stereo Pair, update the dedicated app “MusicCast CONTROLLER” and the firmware of both units to the latest version (☞ P.7).
STEREO PAIR En D Use the dedicated app “MusicCast CONTROLLER” to play back. y • You can check which speaker is the left or right speaker with the dedicated app “MusicCast CONTROLLER” (Indicators light as or of the table). • In Stereo Pair mode, you can operate one speaker to simultaneously turn off both speakers or adjust the volume of both speakers. • If about five minutes passes while the unit cannot find the other speaker to connect to, the pairing standby mode will be cancelled automatically.
UPDATING THE FIRMWARE You can update the firmware only when the unit is connected to the Internet (☞ P.6). Follow the instructions in the MusicCast CONTROLLER app to update. The power indicator flashes quickly while the firmware is being updated. Updating completed: The unit restarts. Updating failed: All the indicators flash. Unplug the power cable from the wall outlet and plug it in after 30 seconds or more, then update the firmware again.
En ADDITIONAL INFORMATION ■ DLNA ■ Internet radio What types of servers can I use to browse or play back music files with DLNA? Can I add other Internet radio stations to the list? Use a DLNA-compatible server, such as one of the following devices.
TROUBLESHOOTING Refer to the table below when the unit does not function properly. If your problem is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Cause Solution The unit is not turned on, or the touch sensors do not react.
TROUBLESHOOTING Cause En Problem The network feature does not function. Solution The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on the router. The unit is starting up. (The unit becomes operative about 10 seconds after plugging the power cable into the wall outlet.) Use the network function after the unit has completely started up. Playback stops (songs cannot be There are unsupported files in the server. played back continuously).
TROUBLESHOOTING Bluetooth Problem Cause The connecting device does not support Cannot make this unit paired with the connecting A2DP. The passkey of the devices, such as a device. Bluetooth adaptor, that you want to pair with this unit is other than “0000.” This unit and the connecting device are too far apart. There is a device (microwave oven, wireless LAN, etc.) that outputs signals in the 2.4 GHz frequency band nearby. The unit is in standby mode. Another Bluetooth device is connected.
En SUPPORTED DEVICES/MEDIA AND FILE FORMATS ■ File format This unit supports the following formats. File Sampling frequency (kHz) Quantization bitrate (bit) Bitrate The number of channels Gapless playback 16/24 — 2 ✔ WAV (PCM format only) 32/44.1/48/88.2/96/ 176.4/192 MP3 32/44.1/48 — ~320kbps 2 — WMA 32/44.1/48 — ~320kbps 2 — MPEG-4 AAC 32/44.1/48 — ~320kbps 2 — FLAC 32/44.1/48/88.2/96/ 176.4/192 16/24 — 2 ✔ ALAC 32/44.1/48/88.2/96 16/24 — 2 ✔ AIFF 32/44.1/48/88.
SPECIFICATIONS ■ PLAYER Network • • • • Ethernet interface.................................... 100Base-TX/10Base-T Internet radio........................................vTuner service supported PC client function ....DLNA Ver. 1.5 (DMR function) supported Supported file format ............................................WAV, FLAC, AIFF (192KHz/24bit) ..................................................................ALAC (96KHz/24bit) ......................................
PRÉCAUTIONS CONCERNANT LA SÉCURITÉ CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : POUR RÉDUIRE LES RISQUES D’INCENDIE ET DE DÉCHARGE ELECTRIQUE, NE PAS RETIRER LE COUVERCLE (OU LE PANNEAU ARRIÈRE). AUCUNE PIÈCE INTERNE NE PEUT ÊTRE CHANGÉE PAR L’UTILISATEUR. POUR L’ENTRETIEN, S’ADRESSER À UN PERSONNEL QUALIFIÉ.
Informations de la FCC (Pour les clients résidents aux États-Unis) Cependant, la conformité à la Réglementation FCC ne garantit pas l’absence d’interférences dans une installation particulière. Si ce produit devait produire des interférences, ce qui peut être déterminé en « ÉTEIGNANT » et en « RALLUMANT » le produit, l’utilisateur est invité à essayer de corriger le problème d’une des manières suivantes : Réorienter ce produit ou le dispositif affecté par les interférences.
ATTENTION : VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER L’APPAREIL. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pour utiliser l’appareil au mieux de ses possibilités, lisez attentivement ce mode d’emploi. Conservez-le soigneusement pour référence. Installez cet appareil dans un endroit frais, bien aéré, sec et propre - à l’abri de la lumière du soleil, des sources de chaleur, des vibrations, des poussières, de l’humidité et du froid. Pour une aération correcte, tenez compte des distances minimales suivantes.
FONCTIONNALITÉS WX-030 Fr Lecture des fichiers musicaux enregistrés sur un smartphone via un réseau (à l’aide de l’application MusicCast CONTROLLER, de serveurs DLNA, de Spotify), via AirPlay (iPod) et via Bluetooth (dispositif Bluetooth). Il est également possible d’utiliser le smartphone comme télécommande. Écoute de la musique diffusée sur les radios Internet et du contenu de diffusion en ligne. Lecture des fichiers musicaux enregistrés sur des ordinateurs et des serveurs DLNA.
INTRODUCTION TABLE DES MATIÈRES INTRODUCTION ACCESSOIRES FOURNIS .................................... 2 NOM DES PIÈCES................................................. 3 PRÉPARATION INSTALLATION ..................................................... 4 MISE SOUS TENSION........................................... 5 CONNEXION AU RÉSEAU.................................... 6 RÉSEAU AUDIO À DOMICILE GRÂCE À MusicCast..............................................................
NOM DES PIÈCES ■ Panneau supérieur Fr 234 1 567 Dessous A B (alimentation)/CONNECT (☞ P.5) Appuyez pour augmenter le volume. C S’allume lors de la connexion Bluetooth. F Voyant d’alimentation S’allume lorsque l’appareil est sous tension. G Voyant réseau S’allume lorsque l’appareil est connecté au réseau filaire ou sans fil (Wi-Fi). Appuyez pour réduire le volume. D 8 H Bouton de réinitialisation (☞ P.16) Lecture/pause. Appuyez sur ce bouton pour redémarrer l’appareil.
PRÉPARATION INSTALLATION Branchez le câble d’alimentation sur la prise murale après avoir raccordé tous les autres câbles. Remarque Si vous placez l’appareil trop près d’un téléviseur CRT, les couleurs de l’image risquent de se dégrader ou un grésillement risque de se produire. Dans ce cas, placez l’appareil à au moins 20 cm du téléviseur. Il ne s’agit pas d’un dysfonctionnement du téléviseur LCD ou plasma.
MISE SOUS TENSION Panneau arrière A Branchez le câble d’alimentation à la L’appareil se met sous tension et le voyant d’alimentation s’allume. Si vous appuyez à nouveau sur cette touche, l’appareil se met hors tension (mode de veille) et le voyant d’alimentation s’éteint. Câble d’alimentation Panneau supérieur Appuyez sur la touche (alimentation)/CONNECT.
CONNEXION AU RÉSEAU Connectez l’appareil au réseau, comme illustré ci-dessous. Tablette Cet appareil Périphérique mobile PC LAN Câble réseau Routeur haut débit Internet Modem WAN Périphérique de stockage réseau (NAS) y • Pour plus d’informations sur la connexion à Internet, consultez les modes d’emploi de vos dispositifs de connexion. • Certains logiciels de sécurité installés sur votre PC ou les paramètres de pare-feu des dispositifs de connexion (p. ex.
RÉSEAU AUDIO À DOMICILE GRÂCE À MusicCast http://www.yamaha.
RÉSEAU AUDIO À DOMICILE GRÂCE À MusicCast ■ Configuration des appareils et lecture de la musique Créez le réseau suivant (réseau MusicCast) à l’aide de l’application MusicCast CONTROLLER. WX-030 routeur sans fil y Si vous souhaitez installer un appareil compatible avec MusicCast dans une pièce hors de portée du routeur sans fil, connectez un autre appareil prenant en charge MusicCast au routeur à l’aide d’un câble réseau afin d’étendre la portée du réseau (mode Avancé).
ÉCOUTE DE MUSIQUE ÉCOUTE DE LA RADIO INTERNET Vous pouvez écouter les stations de radio du monde entier via Internet. Après avoir connecté l’appareil au réseau, utilisez l’application MusicCast CONTROLLER (☞ P.7) pour écouter la radio.
LECTURE DE MUSIQUE VIA AirPlay ◆ A B C Windows Media Player 11 Démarrez Windows Media Player 11 sur votre PC. Sélectionnez « Bibliothèque », puis « Partage des fichiers multimédias ». Cochez la case « Partager mes fichiers multimédias dans », sélectionnez l’icône « WX-030 », puis cliquez sur « Autoriser ». y Les noms dans la liste correspondent aux noms des appareils (Nom de la Pièce). Vous pouvez définir Nom de la Pièce sur « Nom de la Pièce/Information » dans l’application MusicCast CONTROLLER (☞ P.7).
ÉCOUTE DE MUSIQUE À PARTIR DE VOTRE DISPOSITIF Bluetooth Jumelage de cet appareil à votre dispositif Bluetooth ■ Jumelage (enregistrement) 1 (alimentation)/ CONNECT A Mettez l’appareil sous tension. Le voyant d’alimentation s’allume. B Sur votre dispositif de connexion (appareil mobile), activez la fonction Bluetooth. C Effectuez le jumelage Bluetooth sur le dispositif de connexion. Pour plus de détails, voir le mode d’emploi du dispositif de connexion.
AUTRES FONCTIONS ET INFORMATIONS PAIRE STÉRÉO Vous pouvez utiliser deux appareils WX-030 pour reproduire un son stéréo en réglant chaque haut-parleur en tant que haut-parleur droit ou gauche. Séparez le haut-parleur droit du haut-parleur gauche en suivant les étapes ci-dessous. Hautparleur gauche WX-030 WX-030 Hautparleur droit Remarque • Pour utiliser la fonction Paire Stéréo, vous avez besoin de deux WX-030.
PAIRE STÉRÉO D Procédez à la lecture avec l’application dédiée « MusicCast CONTROLLER ». y Remarque Le réglage de la Paire Stéréo est conservé même si les hautparleurs entrent en mode Veille ou si le câble d’alimentation est débranché, puis rebranché. Annulation de la Paire Stéréo Tapez simultanément sur les touches enfoncées pendant 3 secondes. (ou ) et d’un haut-parleur et maintenezles Les témoins s’allument des deux côtés au centre, puis la Paire Stéréo s’annule.
MISE À JOUR DU MICROPROGRAMME Vous pouvez mettre à jour le microprogramme uniquement lorsque l’appareil est connecté à Internet (☞ P.6). Suivez les instructions de l’application MusicCast CONTROLLER pour procéder à la mise à jour. Le voyant d’alimentation clignote rapidement lors de la mise à jour du microprogramme. Une fois la mise à jour terminée, l’appareil redémarre. Tous les voyants clignotent en cas d’échec de la mise à jour.
INFORMATIONS COMPLÉMENTAIRES ■ Radio Internet Quels types de serveurs puis-je utiliser pour parcourir ou lire les fichiers de musique DLNA? Puis-je ajouter d’autres stations radio Internet à cette liste ? Recourez à un serveur compatible DLNA, tel que l’un des suivants.
GUIDE DE DÉPANNAGE Reportez-vous au tableau suivant si l’appareil ne fonctionne pas convenablement. Si l’anomalie constatée n’est pas mentionnée ci-dessous, ou encore si l’action corrective suggérée est sans effet, mettez l’appareil hors tension, débranchez le câble d’alimentation et prenez contact avec le revendeur ou le centre d’entretien Yamaha agréé.
GUIDE DE DÉPANNAGE Anomalies Causes possibles La fonction réseau ne fonctionne Les paramètres réseau (adresse IP) n’ont pas été pas. obtenus correctement. Solution Activez la fonction de serveur DHCP sur le routeur. La lecture s’arrête (la lecture en continu des morceaux est impossible). Des fichiers non pris en charge se trouvent sur le Retirez du dossier en cours de lecture les fichiers que serveur. l’appareil ne prend pas en charge (y compris les fichiers d’image ou les fichiers masqués).
GUIDE DE DÉPANNAGE Bluetooth Anomalies Impossible d’apparier cet appareil avec le dispositif de connexion. Impossible d’établir une connexion Bluetooth. Causes possibles Solution Le dispositif de connexion ne prend pas en charge le profil A2DP. Le code d’accès du dispositif, notamment d’un adaptateur Bluetooth, que vous souhaitez jumeler avec cet appareil est différent de « 0000 ». Cet appareil et le dispositif de connexion sont trop éloignés l’un de l’autre.
APPAREILS/SUPPORTS ET FORMATS DE FICHIER PRIS EN CHARGE ■ Format de fichier Fichier Fr Cet appareil prend en charge les formats suivants.
CARACTÉRISTIQUES TECHNIQUES ■ LECTEUR ■ AUDIO • Réponse en fréquence ................................. 60 Hz à 20 kHz Network • Interface Ethernet ...................................100Base-TX/10Base-T • Service ...............................vTuner Internet radio pris en charge • Fonction PC Client ........................ DLNA Ver. 1.5 (fonction DMR) prise en charge • Formats de fichier pris en charge ........................................ WAV, FLAC, AIFF (192 KHz/24 bits) ............................
PRECAUCIONES DE SEGURIDAD IMPORTANTES CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO QUITE LA CUBIERTA. EL USUARIO NO DEBERA DAR NINGUN TIPO DE SERVICIO A NINGUNA PARTE INTERNA. DEBERA SER REALIZADO SOLO POR PERSONAL DE SERVICIO CALIFICADO.
Información de la Comisión Federal de las Comunicaciones (FCC) (para los consumidores de EE. UU.) El cumplimiento de las reglas de la FCC no garantiza que no se producirán interferencias en todas las instalaciones.
PRECAUCIÓN: LEA LAS INDICACIONES SIGUIENTES ANTES DE UTILIZAR ESTE APARATO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Para asegurar el mejor rendimiento de este aparato, lea atentamente este manual. Y luego guárdelo en un lugar seguro para poder consultarlo en el futuro en caso de ser necesario. Instale esta unidad en un lugar bien ventilado, fresco, seco y limpio, alejado de la luz directa del sol, fuentes de calor, vibración, polvo, humedad y frío.
CARACTERÍSTICAS WX-030 Es Reproduce archivos de música en smartphones mediante una red (con la aplicación MusicCast CONTROLLER, servidores DLNA, Spotify) y a través de AirPlay (iPod) y Bluetooth (dispositivo Bluetooth). También puede utilizar el smartphone como mando a distancia. Reproduce música de radio en Internet y contenido en streaming. Reproduce archivos de música en PC y en servidores DLNA.
INTRODUCCIÓN CONTENIDO INTRODUCCIÓN ACCESORIOS SUMINISTRADOS ........................ 2 NOMBRES DE LAS PARTES ............................... 3 PREPARACIÓN INSTALACIÓN ....................................................... 4 ENCENDIDO DE LA UNIDAD ............................... 5 CONEXIÓN A LA RED .......................................... 6 RED DE AUDIO DOMÉSTICA CON MusicCast ... 7 Conexión a la red con MusicCast CONTROLLER ..............................................
NOMBRES DE LAS PARTES ■ Panel superior 234 1 Es 567 Inferior A B (encendido)/CONNECT (☞ P.5) 8 E Indicador Bluetooth Se ilumina durante la conexión Bluetooth. Baja el volumen. C F Indicador de encendido Se ilumina cuando la unidad está encendida. G Indicador de red Sube el volumen. Se ilumina cuando la unidad está conectada a una red por cable o inalámbrica (Wi-Fi). D Reproducción/pausa. H Botón de reinicio (☞ P.16) Pulse este botón para reiniciar la unidad.
PREPARACIÓN INSTALACIÓN Enchufe el cable de alimentación a la toma de corriente cuando haya conectado todos los demás cables. Nota Si sitúa la unidad demasiado cerca de un televisor CRT, afectará al color de la imagen o provocarán un zumbido En ese caso, aleje la unidad del televisor como mínimo 20 cm. Esto no sucede con los televisores de plasma o LCD. Instale la unidad en un lugar estable y tenga en cuenta lo siguiente: • No coloque la unidad sobre superficies de acero o sobre placas de metal.
ENCENDIDO DE LA UNIDAD Panel posterior A Conecte el cable de alimentación a la toma de corriente y toque (encendido)/CONNECT. La unidad se enciende y el indicador de encendido se ilumina. Si vuelve a tocar el sensor, la unidad se apaga (modo de reposo) y el indicador de encendido se apaga. Panel superior Toque (encendido)/CONNECT. Nota • Desde que se enchufa a la toma de pared, la unidad tarda unos 10 segundos en iniciarse internamente. La unidad no puede reproducir nada durante este tiempo.
CONEXIÓN A LA RED Conecte la unidad a la red tal y como se muestra a continuación. Tablet Esta unidad Dispositivo móvil PC LAN Cable de red Router de banda ancha Internet Módem WAN Almacenamiento conectado a la red (NAS) y • Para obtener más información sobre la conexión a Internet, consulte los manuales de instrucciones de sus dispositivos que vaya a conectar.
RED DE AUDIO DOMÉSTICA CON MusicCast MusicCast es una solución musical inalámbrica de Yamaha completamente nueva que le permite compartir música entre todas las habitaciones con diversos dispositivos. Puede disfrutar de la música de un smartphone, un PC, una unidad NAS o un servicio de música en streaming en cualquier punto del hogar con una aplicación fácil de usar. Para ver información más detallada y una lista de productos compatibles con MusicCast, visite nuestro sitio web. http://www.yamaha.
RED DE AUDIO DOMÉSTICA CON MusicCast ■ Configuración de los dispositivos y reproducción Cree la siguiente red (red MusicCast) con la aplicación MusicCast CONTROLLER. WX-030 router inalámbrico y Si desea instalar un dispositivo compatible con MusicCast en una ubicación que se encuentre fuera del alcance del router inalámbrico, conecte al router otro dispositivo compatible con MusicCast con un cable de red para ampliar el alcance (modo Extensión).
ESCUCHAR MÚSICA ESCUCHAR RADIO EN INTERNET Ahora, tiene la posibilidad de escuchar emisoras de radio de todo el mundo por Internet. Una vez conectada la unidad a la red, utilice la aplicación MusicCast CONTROLLER (☞ P.7) para reproducir la radio. y ESCUCHAR CANCIONES EN EL ORDENADOR Y EN EL DISPOSITIVO NAS Esta unidad permite reproducir archivos de música como MP3, WMA o FLAC (formato de compresión de datos de audio sin pérdida) almacenados en el ordenador (servidor) conectado a la red o NAS.
REPRODUCCIÓN DE MÚSICA CON AirPlay ◆ A B C Para Windows Media Player 11 Inicie Windows Media Player 11 en el PC. Seleccione “Biblioteca” y, después, “Uso compartido de multimedia”. Marque la casilla “Compartir mi multimedia con”, seleccione el icono “WX-030” y haga clic en “Permitido”. y Los nombres de la lista son los nombres de los dispositivos (nombre de la habitación). Puede configurar el nombre de la habitación desde “ Nombre de la habitación/Información” en la aplicación MusicCast CONTROLLER (☞ P.
ESCUCHAR MÚSICA DESDE EL DISPOSITIVO Bluetooth Esta unidad proporciona funcionalidad Bluetooth. Puede disfrutar de la reproducción de música de forma inalámbrica desde un dispositivo Bluetooth (smartphone, reproductor de audio digital, etc.). Consulte también el manual de instrucciones del dispositivo Bluetooth. Emparejamiento de esta unidad con el dispositivo Bluetooth ■ Emparejamiento (Registro) (encendido)/CONNECT Es 1 A Encienda la unidad. El indicador de encendido se ilumina.
OTRAS FUNCIONES E INFORMACIÓN EMPAREJAMIENTO STEREO Puede usar dos unidades WX-030 para reproducir sonido estéreo configurando una como altavoz derecho y la otra como altavoz izquierdo. Configure los altavoces izquierdo y derecho por separado, siguiendo los pasos indicados a continuación. Altavoz izquierdo Nota WX-030 WX-030 Altavoz derecho • Para usar la función Emparejamiento stereo, necesita dos WX-030.
EMPAREJAMIENTO STEREO D Utilice la app “MusicCast CONTROLLER” para reproducir contenidos. y • Puede consultar qué altavoz actúa como altavoz izquierdo y cuál como altavoz derecho con la app “MusicCast CONTROLLER” (los indicadores se iluminan con el patrón o de la tabla). • En el modo Emparejamiento stereo, desde un altavoz puede apagar o ajustar el volumen de los dos altavoces a la vez.
ACTUALIZACIÓN DEL FIRMWARE Es posible actualizar el firmware solamente si la unidad está conectada a Internet (☞ P.6). Siga las instrucciones de la aplicación MusicCast CONTROLLER para actualizarlo. El indicador de encendido parpadea rápidamente cuando el firmware se está actualizando. Actualización finalizada: la unidad se reinicia. Actualización fallida: todos los indicadores parpadean. Desconecte el cable de alimentación de la toma de corriente y espere 30 segundos o más para volver a conectarlo.
INFORMACIÓN ADICIONAL ■ DLNA ■ Radio en Internet ¿Qué tipos de servidores puedo emplear para examinar o reproducir los archivos de música con DLNA? ¿Puede añadir otras emisoras de radio en Internet a la lista? ■ iTunes Desde el sitio web “vTuner Internet Radio” podrá añadir manualmente las emisoras de radio en Internet que no aparezcan en la lista automática. Para usar esta función, debe acceder a la siguiente dirección URL para obtener una nueva cuenta. http://yradio.vtuner.
SOLUCIÓN DE PROBLEMAS Consulte la tabla inferior cuando la unidad no funcione correctamente. Si su problema no aparece en la lista a continuación, o si las instrucciones no le sirven de ayuda, apague la unidad, desenchufe el cable de alimentación y póngase en contacto con un centro Yamaha de atención al cliente o concesionario autorizado. General Problema Causa La unidad no se enciende o los sensores táctiles no reaccionan.
SOLUCIÓN DE PROBLEMAS Problema La función de red no funciona. Causa Los parámetros de red (dirección IP) no se han obtenido correctamente. Solución Active la función del servidor DHCP en el router. La unidad se está activando. (La unidad está Utilice la función de red cuando la unidad se haya operativa aproximadamente 10 segundos después iniciado por completo. de haber enchufado el cable de alimentación a la toma de corriente.) El servidor contiene archivos no compatibles.
SOLUCIÓN DE PROBLEMAS Bluetooth Problema No se puede emparejar esta unidad con el dispositivo conectado. Causa El dispositivo conectado no es compatible con el perfil A2DP. La clave de acceso de los dispositivos, como un adaptador Bluetooth, que desea emparejar con esta unidad es diferente de “0000”. Esta unidad y el dispositivo conectado están demasiado alejados. Hay un dispositivo cerca (horno microondas, LAN inalámbrica, etc.) que emite señales en la banda de frecuencia de 2,4 GHz.
DISPOSITIVOS, SOPORTES Y FORMATOS DE ARCHIVO COMPATIBLES ■ Formatos de archivo Esta unidad es compatible con los siguientes formatos.
ESPECIFICACIONES ■ REPRODUCTOR ■ AUDIO • Respuesta de frecuencia.........................De 60 Hz a 20 kHz Red • Interfaz Ethernet ..................................... 100Base-TX/10Base-T • Radio en Internet..............................Servicio vTuner compatible • Función de cliente PC ................................ DLNA Ver. 1.5 (función DMR) compatible • Formatos de archivo compatibles ........................................ WAV, FLAC, AIFF (192 KHz/24 bits) ........................................
© 2015 Yamaha Corporation Printed in China ZU80120-1